The clock-names property is required because the driver requests
the clock by name and not the index.
Update the example to use &clk instead of &nf_clk for the clocks
property to avoid confusion with the clock-names property "nf_clk".
Fixes: 1f05f823a1 (dt-bindings: mtd: cadence: convert cadence-nand-controller.txt to yaml)
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* Raw NAND changes
A new controller driver, from Nuvoton, has been merged.
Bastien Curutchet has contributed a series improving the Davinci
controller driver, both on the organization of the code, but also on the
performance side. The binding has also been converted to yaml, received
a new OOB layout and now supports on-die ECC engines.
The Qualcomm controller driver has been deeply cleaned to extract some
parts of the code into a shared file with the Qualcomm SPI memory
controller.
Aside from these main changes, the Cadence binding has been converted to
yaml, the brcmnand controller driver has received a small fix, otherwise
some more minor changes have also made their way in.
* SPI NAND changes
The SPI NAND subsystem has seen a great improvement, with the advent of
DTR operations (DDR operations, which may be extended to the address
cycles). The first vendor driver to benefit from these improvements is
the Winbond driver.
A new manufacturer driver is added SkyHigh, with a new constraint for
the core, it is impossible to disable the on-die ECC engine.
A Foresee device is also now supported.
SPI NOR changes for 6.14
Notable changes:
- Add flash entries for Atmel AT25SF321, Spansion S28HL256T, S28HL02GT.
- Add support for vcc-supply regulators and their DT bindings.
- Drop mx25u25635f entry. The flash shares its ID with mx25u25645g and
both parts have an SFDP table. Removing their entry lets them be
driven by the generic SFDP-based driver.
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
Pull MTD updates from Miquel Raynal:
"Nothing stands out for this merge window, mostly minor fixes, such as
module descriptions, the use of debug macros and Makefile
improvements.
Raw NAND changes;
- The Freescale MXC driver has been converted to the newer
'->exec_op()' interface
- The meson driver now supports handling the boot ROM area with very
specific ECC needs
- Support for the iMX8QXP has been added to the GPMI driver
- The lpx32xx driver now can get the DMA channels using DT entries
- The Qcom binding has been improved to be more future proof by Rob
- And then there is the usual load of misc and minor changes
SPI-NAND changes:
- The Macronix vendor driver has been improved to support an extended
ID to avoid conflicting with older devices after an ID reuse issue
SPI NOR changes:
- Drop support for Xilinx S3AN flashes. These flashes are for the
very old Xilinx Spartan 3 FPGAs and they need some awkward code in
the core to support.
Drop support for these flashes, along with the special handling we
needed for them in the core like non-power-of-2 page size handling
and the .setup() callback.
- Fix regression for old w25q128 flashes without SFDP tables.
Commit 83e824a4a5 ("mtd: spi-nor: Correct flags for Winbond
w25q128") dropped support for such devices under the assumption
that they aren't being used anymore. Users have now surfaced [0] so
fix the regression by supporting both kind of devices.
- Core cleanups including removal of SPI_NOR_NO_FR flag and
simplification of spi_nor_get_flash_info()"
Link: https://lore.kernel.org/r/CALxbwRo_-9CaJmt7r7ELgu+vOcgk=xZcGHobnKf=oT2=u4d4aA@mail.gmail.com/ [0]
* tag 'mtd/for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (28 commits)
mtd: rawnand: lpx32xx: Fix dma_request_chan() error checks
mtd: spinand: macronix: Add support for serial NAND flash
mtd: spinand: macronix: Add support for reading Device ID 2
mtd: rawnand: lpx32xx: Request DMA channels using DT entries
dt-bindings: mtd: qcom,nandc: Define properties at top-level
mtd: rawnand: intel: use 'time_left' variable with wait_for_completion_timeout()
mtd: rawnand: mxc: use 'time_left' variable with wait_for_completion_timeout()
mtd: rawnand: gpmi: add iMX8QXP support.
mtd: rawnand: gpmi: add 'support_edo_timing' in gpmi_devdata
mtd: cmdlinepart: Replace `dbg()` macro with `pr_debug()`
mtd: add missing MODULE_DESCRIPTION() macros
mtd: make mtd_test.c a separate module
dt-bindings: mtd: gpmi-nand: Add 'fsl,imx8qxp-gpmi-nand' compatible string
mtd: rawnand: cadence: remove unused struct 'ecc_info'
mtd: rawnand: mxc: support software ECC
mtd: rawnand: mxc: implement exec_op
mtd: rawnand: mxc: separate page read from ecc calc
mtd: spi-nor: winbond: fix w25q128 regression
mtd: spi-nor: simplify spi_nor_get_flash_info()
mtd: spi-nor: get rid of SPI_NOR_NO_FR
...
Convention is DT schemas should define all properties at the top-level
and not inside of if/then schemas. That minimizes the if/then schemas
and is more future proof.
There were 2 "if" schemas for "qcom,ipq806x-nand" and the
"qcom,boot-partitions: true" unnecessary, so the conditional schemas
can be simplified a bit.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240625215605.192260-1-robh@kernel.org
Boot ROM code on Meson requires that some pages on NAND must be written
in special mode: "short" ECC mode where each block is 384 bytes and
scrambling mode is on. Such pages are located on the chip in the
following way (for example):
[ p0 ][ p1 ][ p2 ][ p3 ][ p4 ][ p5 ][ p6 ][ p7 ] ... [ pN ]
^ ^ ^ ^
pX is page number "X". "^" means "special" page used by boot ROM - e.g.
every 2nd page in the range of [0, 7]. Step (2 in example is set by
'amlogic,boot-page-step' field. Last page in range (7 in example) is
set by 'amlogic,boot-pages' field.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240507230903.3399594-2-avkrasnov@salutedevices.com
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert samsung,exynos5-dp, atmel,lcdc, aspeed,ast2400-wdt bindings
to schemas
- Add bindings for Allwinner H616 NMI controller, Renesas r8a779g0
irqc, Renesas R-Car V4M TMU and CMT timers, Freescale S32G3
linflexuart, and Mediatek MT7988 XHCI
- Add 'reg' constraints on DSI and SPI display panels
- More dropping of unnecessary quotes in schemas
- Use full paths rather than relative paths in schema $refs
- Drop redundant storing of phandle for reserved memory
DT Core:
- Use scope based cleanups for kfree() and of_node_put()
- Track interrupt-map and power-supplies for fw_devlink
- Add buffer overflow check in of_modalias()
- Add and use __of_prop_free() helper for freeing struct property"
* tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits)
of: property: Add fw_devlink support for interrupt-map property
dt-bindings: display: panel: constrain 'reg' in DSI panels
dt-bindings: display: panel: constrain 'reg' in SPI panels
dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref
dt-bindings: Use full path to other schemas
dt-bindings: PCI: qcom,pcie-sm8350: Drop redundant 'oneOf' sub-schema
of: module: add buffer overflow check in of_modalias()
dt-bindings: PCI: microchip: increase number of items in ranges property
dt-bindings: Drop unnecessary quotes on keys
dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop unnecessary quotes
of: property: Use scope based cleanup on port_node
of: reserved_mem: Remove the use of phandle from the reserved_mem APIs
of: property: fw_devlink: Add support for "power-supplies" binding
dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
dt-bindings: irq: sun7i-nmi: Add binding for the H616 NMI controller
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779g0 support
dt-bindings: timer: renesas,tmu: Add R-Car V4M support
dt-bindings: timer: renesas,cmt: Add R-Car V4M support
of: Use scope based of_node_put() cleanups
of: Use scope based kfree() cleanups
...
Add two compatibles for binman entries, as a starting point for the
schema.
Note that, after discussion on v2, we decided to keep the existing
meaning of label so as not to require changes to existing userspace
software when moving to use binman nodes to specify the firmware
layout.
Note also that, after discussion on v6, we decided to use the same
'fixed-partition' schema for the binman features, so this version
adds a new 'binman.yaml' file providing the new compatibles to the
existing partition.yaml binding.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240412153249.100787-2-sjg@chromium.org
Add three properties for controlling alignment of partitions, aka
'entries' in fixed-partition.
For now there is no explicit mention of hierarchy, so a 'section' is
just the 'fixed-partitions' node.
These new properties are inputs to the Binman packaging process, but are
also needed if the firmware is repacked, to ensure that alignment
constraints are not violated. Therefore they are provided as part of
the schema.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240412153249.100787-1-sjg@chromium.org
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Add Zhihao Cheng as reviewer
- Attach via device tree
- Add NVMEM layer
- Various fastmap related fixes
UBIFS:
- Add Zhihao Cheng as reviewer
- Convert to folios
- Various fixes (memory leaks in error paths, function prototypes)"
* tag 'ubifs-for-linus-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: (34 commits)
mtd: ubi: fix NVMEM over UBI volumes on 32-bit systems
mtd: ubi: provide NVMEM layer over UBI volumes
mtd: ubi: populate ubi volume fwnode
mtd: ubi: introduce pre-removal notification for UBI volumes
mtd: ubi: attach from device tree
mtd: ubi: block: use notifier to create ubiblock from parameter
dt-bindings: mtd: ubi-volume: allow UBI volumes to provide NVMEM
dt-bindings: mtd: add basic bindings for UBI
ubifs: Queue up space reservation tasks if retrying many times
ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path
ubifs: dbg_check_idx_size: Fix kmemleak if loading znode failed
ubi: Correct the number of PEBs after a volume resize failure
ubi: fix slab-out-of-bounds in ubi_eba_get_ldesc+0xfb/0x130
ubi: correct the calculation of fastmap size
ubifs: Remove unreachable code in dbg_check_ltab_lnum
ubifs: fix function pointer cast warnings
ubifs: fix sort function prototype
ubi: Check for too small LEB size in VTBL code
MAINTAINERS: Add Zhihao Cheng as UBI/UBIFS reviewer
ubifs: Convert populate_page() to take a folio
...
Raw NAND
The main series brought is an update of the Broadcom support to support
all BCMBCA SoCs and their specificity (ECC, write protection,
configuration straps), plus a few misc fixes and changes in the main
driver. Device tree updates are also part of this PR, initially because
of a misunderstanding on my side.
The STM32_FMC2 controller driver is also upgraded to properly support
MP1 and MP25 SoCs.
A new compatible is added for an Atmel flavor.
Among all these feature changes, there is as well a load of continuous
read related fixes, avoiding more corner conditions and clarifying the
logic. Finally a few miscellaneous fixes are made to the core, the
lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as
final one in the Hynix vendor driver.
SPI-NAND
The ESMT support has been extended to match 5 bytes ID to avoid
collisions. Winbond support on its side receives support for W25N04KV
chips.
SPI NOR gets the non uniform erase code cleaned. We stopped using
bitmasks for erase types and flags, and instead introduced dedicated
members. We then passed the SPI NOR erase map to MTD. Users can now
determine the erase regions and make informed decisions on partitions
size.
UBI volumes may be used to contain NVMEM bits, typically device MAC
addresses or wireless radio calibration data.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Pull mtd updates from Miquel Raynal:
"The main set of changes is related to Uwe's work converting platform
remove callbacks to return void. Comes next (in number of changes)
Kees' additional structures annotations to improve the sanitizers. The
usual amount of cleanups apply.
About the more substancial contribution, one main function of the
partitions core could return an error which was not checked, this is
now fixed. On the bindings side, fixed partitions can now have a
compression property. Finally, an erroneous situation is now always
avoided in the MAP RAM driver.
CFI:
- A several years old byte swap has been fixed.
NAND:
- The subsystem has, as usual, seen a bit of cleanup being done this
cycle, typically return values of platform_get_irq() and
devm_kasprintf(). There is also a better ECC check in the Arasan
driver. This comes with smaller misc changes.
- In the SPI-NAND world there is now support for Foresee F35SQA002G,
Winbond W25N and XTX XT26 chips.
SPI NOR:
- For SPI NOR we cleaned the flash info entries in order to have them
slimmer and self explanatory. In order to make the entries as slim
as possible, we introduced sane default values so that the actual
flash entries don't need to specify them. We now use a flexible
macro to specify the flash ID instead of the previous INFOx()
macros that had hardcoded ID lengths.
Instead of:
{ "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 0)
OTP_INFO(256, 3, 0x1000, 0x1000) },
We now use:
.id = SNOR_ID(0xef, 0x80, 0x20),
.name = "w25q512nwm",
.otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
- We also removed some flash entries: the very old Catalyst SPI
EEPROMs that were introduced once with the SPI-NOR subsystem, and a
Fujitsu MRAM. Both should use the at25 EEPROM driver. The latter
even has device tree bindings for the at25 driver.
- We made sure that the conversion didn't introduce any unwanted
changes by comparing the .rodata segment before and after the
conversion. The patches landed in linux-next immediately after
v6.6-rc2, we haven't seen any regressions yet.
- Apart of the autumn cleaning we introduced a new flash entry,
at25ff321a, and added block protection support for mt25qu512a"
* tag 'mtd/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (91 commits)
mtd: cfi_cmdset_0001: Byte swap OTP info
mtd: rawnand: meson: check return value of devm_kasprintf()
mtd: rawnand: intel: check return value of devm_kasprintf()
mtd: rawnand: sh_flctl: Convert to module_platform_driver()
mtd: spi-nor: micron-st: use SFDP table for mt25qu512a
mtd: spi-nor: micron-st: enable lock/unlock for mt25qu512a
mtd: rawnand: Remove unused of_gpio.h inclusion
mtd: spinand: Add support for XTX XT26xxxDxxxxx
mtd: spinand: winbond: add support for serial NAND flash
mtd: rawnand: cadence: Annotate struct cdns_nand_chip with __counted_by
mtd: rawnand: Annotate struct mtk_nfc_nand_chip with __counted_by
mtd: spinand: add support for FORESEE F35SQA002G
mtd: rawnand: rockchip: Use struct_size()
mtd: rawnand: arasan: Include ECC syndrome along with in-band data while checking for ECC failure
mtd: Use device_get_match_data()
mtd: spi-nor: nxp-spifi: Convert to platform remove callback returning void
mtd: spi-nor: hisi-sfc: Convert to platform remove callback returning void
mtd: maps: sun_uflash: Convert to platform remove callback returning void
mtd: maps: sa1100-flash: Convert to platform remove callback returning void
mtd: maps: pxa2xx-flash: Convert to platform remove callback returning void
...
Pull MTD updates from Miquel Raynal:
"Core MTD changes:
- Use refcount to prevent corruption
- Call external _get and _put in right order
- Fix use-after-free in mtd release
- Explicitly include correct DT includes
- Clean refcounting with MTD_PARTITIONED_MASTER
- mtdblock: make warning messages ratelimited
- dt-bindings: Add SEAMA partition bindings
Device driver changes:
- Use devm helper functions
- Fix questionable cast, remove pointless ones.
- error handling fixes
- add support for new chip versions
- update DT bindings
- misc cleanups - fix typos, whitespace, indentation"
* tag 'mtd/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (105 commits)
dt-bindings: mtd: amlogic,meson-nand: drop unneeded quotes
mtd: spear_smi: Use helper function devm_clk_get_enabled()
mtd: rawnand: orion: Use helper function devm_clk_get_optional_enabled()
mtd: rawnand: vf610_nfc: Use helper function devm_clk_get_enabled()
mtd: rawnand: sunxi: Use helper function devm_clk_get_enabled()
mtd: rawnand: stm32_fmc2: Use helper function devm_clk_get_enabled()
mtd: rawnand: mtk: Use helper function devm_clk_get_enabled()
mtd: rawnand: mpc5121: Use helper function devm_clk_get_enabled()
mtd: rawnand: lpc32xx_slc: Use helper function devm_clk_get_enabled()
mtd: rawnand: intel: Use helper function devm_clk_get_enabled()
mtd: rawnand: fsmc: Use helper function devm_clk_get_enabled()
mtd: rawnand: arasan: Use helper function devm_clk_get_enabled()
mtd: rawnand: qcom: Add read/read_start ops in exec_op path
mtd: rawnand: qcom: Clear buf_count and buf_start in raw read
mtd: maps: fix -Wvoid-pointer-to-enum-cast warning
mtd: rawnand: fix -Wvoid-pointer-to-enum-cast warning
mtd: rawnand: fsmc: handle clk prepare error in fsmc_nand_resume()
mtd: rawnand: Propagate error and simplify ternary operators for brcmstb_nand_wait_for_completion()
mtd: rawnand: qcom: Sort includes alphabetically
mtd: rawnand: qcom: Do not override the error no of submit_descs()
...
Raw NAND core changes:
* Fix -Wvoid-pointer-to-enum-cast warning
* Export 'nand_exit_status_op()'
* dt-bindings: Fix nand-controller.yaml license
Raw NAND controller driver changes:
* Omap, Omap2, Samsung, Atmel, fsl_upm, lpc32xx_slc, lpc32xx_mlc, STM32_FMC2,
sh_ftlctl, MXC, Sunxi:
- Use devm_platform_get_and_ioremap_resource()
* Orion, vf610_nfc, Sunxi, STM32_FMC2, MTK, mpc5121, lpc32xx_slc, Intel,
FSMC, Arasan:
- Use helper function devm_clk_get_optional_enabled()
* Brcmnand:
- Use devm_platform_ioremap_resource_byname()
- Propagate init error -EPROBE_DEFER up
- Propagate error and simplify ternary operators
- Fix mtd oobsize
- Fix potential out-of-bounds access in oob write
- Fix crash during the panic_write
- Fix potential false time out warning
- Fix ECC level field setting for v7.2 controller
* fsmc: Handle clk prepare error in fsmc_nand_resume()
* Marvell: Add support for AC5 SoC
* Meson:
- Support for 512B ECC step size
- Fix build error
- Use NAND core API to check status
- dt-bindings:
* Make ECC properties dependent
* Support for 512B ECC step size
* Drop unneeded quotes
* Oxnas: Remove driver and bindings
* Qcom:
- Conversion to ->exec_op()
- Removal of the legacy interface
- Two full series of improvements/misc fixes
* Use the BIT() macro
* Use u8 instead of uint8_t
* Fix alignment with open parenthesis
* Fix the spacing
* Fix wrong indentation
* Fix a typo
* Early structure initialization
* Fix address parsing within ->exec_op()
* Remove superfluous initialization of "ret"
* Rename variables in qcom_op_cmd_mapping()
* Handle unsupported opcode in qcom_op_cmd_mapping()
* Fix the opcode check in qcom_check_op()
* Use EOPNOTSUPP instead of ENOTSUPP
* Wrap qcom_nand_exec_op() to 80 columns
* Unmap sg_list and free desc within submic_descs()
* Simplify the call to nand_prog_page_end_op()
* Do not override the error no of submit_descs()
* Sort includes alphabetically
* Clear buf_count and buf_start in raw read
* Add read/read_start ops in exec_op path
* vf610_nfc: Do not check 0 for platform_get_irq()
SPI-NAND changes:
* gigadevice: Add support for GD5F1GQ{4,5}RExxH
* esmt: Add support for F50D2G41KA
* toshiba: Add support for T{C,H}58NYG{0,2}S3HBAI4 and TH58NYG3S0HBAI6
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
SPI NOR core changes:
* fix assumption on enabling quad mode in
spi_nor_write_16bit_sr_and_check()
* avoid setting SRWD bit in SR if WP# signal not connected as it will
configure the SR permanently as read only. Add "no-wp" dt property.
* clarify the need for spi-nor compatibles in dt-bindings
SPI NOR manufacturer drivers changes:
* spansion:
- add support for S28HS02GT
- switch methods to use vreg_offset from SFDP instead of hardcoding
the register value
* microchip/sst:
- add support for sst26vf032b flash
* winbond:
- correct flags for Winbond w25q128
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Binding files should be dual licensed. This file was initially written
as a .txt file with no specific license, so was implicitely
GPLv2. Significant part of this file and its conversion into yaml were
written by Bootlin employees which agree to comply with the rules
regarding the dual licensing so let's fix the SPDX tag to reflect the
correct license by changing it from GPL to GPL + BSD-2-Clause.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20230712151042.433593-1-miquel.raynal@bootlin.com
