When the driver was originally created, it was decided that
sampling_frequency and hysteresis would be shared_per_type instead
of shared_by_all (even though it is internally shared by all). Eg:
in_proximity_raw
in_proximity_sampling_frequency
When we introduced support for more channels, we continued with
shared_by_type which. Eg:
in_proximity0_raw
in_proximity1_raw
in_proximity_sampling_frequency
in_attention_raw
in_attention_sampling_frequency
Ideally we should change to shared_by_all, but it is not an option,
because the current naming has been a stablished ABI by now. Luckily we
can use separate instead. That will be more consistent:
in_proximity0_raw
in_proximity0_sampling_frequency
in_proximity1_raw
in_proximity1_sampling_frequency
in_attention_raw
in_attention_sampling_frequency
Fixes: 596ef5cf65 ("iio: hid-sensor-prox: Add support for more channels")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20241216-fix-hid-sensor-v2-1-ff8c1959ec4a@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The two provided max_scale_nano values must be multiplied by 100 and 10
respectively to achieve nano units. According to the comments:
Max scale for apds0306 is 16.326432 → the fractional part is 0.326432,
which is 326432000 in NANO. The current value is 3264320.
Max scale for apds0306-065 is 14.09721 → the fractional part is 0.09712,
which is 97120000 in NANO. The current value is 9712000.
Update max_scale_nano initialization to use the right NANO fractional
parts.
Cc: stable@vger.kernel.org
Fixes: 620d1e6c7a ("iio: light: Add support for APDS9306 Light Sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Tested-by: subhajit.ghosh@tweaklogic.com
Link: https://patch.msgid.link/20250112-apds9306_nano_vals-v1-1-82fb145d0b16@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Merge from Jonathan:
IIO: 2nd set of fixes for the 6.13 cycle.
Given timing so late in cycle and that they are all confined to
specific drivers, it is fine for these to go upstream early in the
6.14 cycle.
hid-sensors
- Handle processed attention channel rather than just returning
an error.
adi,ad3552r
- Fix output ranges for ad3541r and ad3542r.
- Clear the reset status flag so that we can pick up any resets
during operation.
adi,ad5791
- Fix a misleading dt binding example where the sense of the
interrupt was reversed.
adi,ad7606
- Fix some hard coded offsets that should be taking the number of
channels on a particular part into account. These were missed
due to some racing changes.
ams,as73211
- Fix an off by one in optimized path for just reading the colour
channels.
bosch,bme680
- Fix type of variable passed as pointer, ensuring it works on
big endian systems and doesn't expose uninitialized data.
* tag 'iio-fixes-for-6.13b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: dac: ad3552r-hs: clear reset status flag
iio: dac: ad3552r-common: fix ad3541/2r ranges
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
iio: light: as73211: fix channel handling in only-color triggered buffer
dt-bindings: iio: dac: ad5791: ldac gpio is active low
iio: hid-sensor-prox: Fix invalid read_raw for attention
iio: adc: ad7606: Fix hardcoded offset in the ADC channels
We need the IIO fixes in here as well, and it resolves a merge conflict
in:
drivers/iio/adc/ti-ads1119.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current scale is not ABI-compliant as it is just the sensor gain
instead of the value that acts as a multiplier to be applied to the raw
value (there is no offset).
Use the iio-gts helpers to obtain the proper scale values according to
the gain and integration time to match the resolution tables from the
datasheet. When at it, use 'scale' instead of 'gain' consistently for
the get/set functions to avoid misunderstandings.
Fixes: c5a23f80c1 ("iio: light: add support for veml3235")
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241230-veml3235_scale-v3-2-48a5795e2f64@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The channel index is off by one unit if AS73211_SCAN_MASK_ALL is not
set (optimized path for color channel readings), and it must be shifted
instead of leaving an empty channel for the temperature when it is off.
Once the channel index is fixed, the uninitialized channel must be set
to zero to avoid pushing uninitialized data.
Add available_scan_masks for all channels and only-color channels to let
the IIO core demux and repack the enabled channels.
Cc: stable@vger.kernel.org
Fixes: 403e5586b5 ("iio: light: as73211: New driver")
Tested-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241214-iio_memset_scan_holes-v4-1-260b395b8ed5@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The 'buffer' local array is used to push data to userspace from a
triggered buffer, but it does not set an initial value for the single
data element, which is an u16 aligned to 8 bytes. That leaves at least
4 bytes uninitialized even after writing an integer value with
regmap_read().
Initialize the array to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org
Fixes: ec90b52c07 ("iio: light: vcnl4035: Fix buffer alignment in iio_push_to_buffers_with_timestamp()")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-6-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
write_event_config callback use an int for state, but it is actually a
boolean. iio_ev_state_store is actually using kstrtobool to check user
input, then gives the converted boolean value to write_event_config.
Fix signature and update all iio drivers to use the new signature.
This patch has been partially written using coccinelle with the
following script:
$ cat iio-bool.cocci
// Options: --all-includes
virtual patch
@c1@
identifier iioinfo;
identifier wecfunc;
@@
static const struct iio_info iioinfo = {
...,
.write_event_config =
(
wecfunc
|
&wecfunc
),
...,
};
@@
identifier c1.wecfunc;
identifier indio_dev, chan, type, dir, state;
@@
int wecfunc(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir,
-int
+bool
state) {
...
}
make coccicheck MODE=patch COCCI=iio-bool.cocci M=drivers/iio
Unfortunately, this script didn't match all files:
* all write_event_config callbacks using iio_device_claim_direct_scoped
were not detected and not patched.
* all files that do not assign and declare the write_event_config
callback in the same file.
iio.h was also manually updated.
The patch was build tested using allmodconfig config.
cc: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20241031-iio-fix-write-event-config-signature-v2-7-2bcacbb517a2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
state parameter is currently an int, but it is actually a boolean.
iio_ev_state_store is actually using kstrtobool to check user input,
then gives the converted boolean value to write_event_config. The code
in adux1020_write_event_config re-uses state parameter to store an
integer value. To prepare for updating the write_event_config signature
to use a boolean for state, introduce a new local int variable.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20241031-iio-fix-write-event-config-signature-v2-6-2bcacbb517a2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The raw value conversion to obtain a measurement in lux as
INT_PLUS_MICRO does not calculate the decimal part properly to display
it as micro (in this case microlux). It only calculates the module to
obtain the decimal part from a resolution that is 10000 times the
provided in the datasheet (0.5376 lux/cnt for the veml6030). The
resulting value must still be multiplied by 100 to make it micro.
This bug was introduced with the original implementation of the driver.
Only the illuminance channel is fixed becuase the scale is non sensical
for the intensity channels anyway.
Cc: stable@vger.kernel.org
Fixes: 7b779f573c ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241016-veml6030-fix-processed-micro-v1-1-4a5644796437@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The custom rpr0521_trigger_consumer_store_time() is registered as trigger
handler in the devm_iio_triggered_buffer_setup() function. This function
is called from the calling of the iio_trigger_poll() used in the
sysfs/hrt triggers and it is not used anywhere else in this driver.
The irq handler of the driver is the rpr0521_drdy_irq_handler() which
saves the timestamp and then wakes the irq thread. The irq thread is
the rpr0521_drdy_irq_thread() function which checks if the irq came
from the sensor and wakes up the trigger threaded handler through
iio_trigger_poll_nested() or returns IRQ_NONE in case the irq didn't
come from this sensor.
This means that in the current driver, you can't reach the
rpr0521_trigger_consumer_store_time() when the device's irq is
triggered. This means that the extra check of iio_trigger_using_own()
is redundant since it will always be false so the general
iio_pollfunc_store_time() can be used.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240922162041.525896-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
