Pull bpf updates from Alexei Starovoitov:
"A smaller than usual release cycle.
The main changes are:
- Prepare selftest to run with GCC-BPF backend (Ihor Solodrai)
In addition to LLVM-BPF runs the BPF CI now runs GCC-BPF in compile
only mode. Half of the tests are failing, since support for
btf_decl_tag is still WIP, but this is a great milestone.
- Convert various samples/bpf to selftests/bpf/test_progs format
(Alexis Lothoré and Bastien Curutchet)
- Teach verifier to recognize that array lookup with constant
in-range index will always succeed (Daniel Xu)
- Cleanup migrate disable scope in BPF maps (Hou Tao)
- Fix bpf_timer destroy path in PREEMPT_RT (Hou Tao)
- Always use bpf_mem_alloc in bpf_local_storage in PREEMPT_RT (Martin
KaFai Lau)
- Refactor verifier lock support (Kumar Kartikeya Dwivedi)
This is a prerequisite for upcoming resilient spin lock.
- Remove excessive 'may_goto +0' instructions in the verifier that
LLVM leaves when unrolls the loops (Yonghong Song)
- Remove unhelpful bpf_probe_write_user() warning message (Marco
Elver)
- Add fd_array_cnt attribute for prog_load command (Anton Protopopov)
This is a prerequisite for upcoming support for static_branch"
* tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (125 commits)
selftests/bpf: Add some tests related to 'may_goto 0' insns
bpf: Remove 'may_goto 0' instruction in opt_remove_nops()
bpf: Allow 'may_goto 0' instruction in verifier
selftests/bpf: Add test case for the freeing of bpf_timer
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
bpf: Free element after unlock in __htab_map_lookup_and_delete_elem()
bpf: Bail out early in __htab_map_lookup_and_delete_elem()
bpf: Free special fields after unlock in htab_lru_map_delete_node()
tools: Sync if_xdp.h uapi tooling header
libbpf: Work around kernel inconsistently stripping '.llvm.' suffix
bpf: selftests: verifier: Add nullness elision tests
bpf: verifier: Support eliding map lookup nullness
bpf: verifier: Refactor helper access type tracking
bpf: tcp: Mark bpf_load_hdr_opt() arg2 as read-write
bpf: verifier: Add missing newline on verbose() call
selftests/bpf: Add distilled BTF test about marking BTF_IS_EMBEDDED
libbpf: Fix incorrect traversal end type ID when marking BTF_IS_EMBEDDED
libbpf: Fix return zero when elf_begin failed
selftests/bpf: Fix btf leak on new btf alloc failure in btf_distill test
veristat: Load struct_ops programs only once
...
test_xdp_redirect.sh can't be used by the BPF CI.
Migrate test_xdp_redirect.sh into a new test case in xdp_do_redirect.c.
It uses the same network topology and the same BPF programs located in
progs/test_xdp_redirect.c and progs/xdp_dummy.c.
Remove test_xdp_redirect.sh and its Makefile entry.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250110-xdp_redirect-v2-2-b8f3ae53e894@bootlin.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2025-01-07
We've added 7 non-merge commits during the last 32 day(s) which contain
a total of 11 files changed, 190 insertions(+), 103 deletions(-).
The main changes are:
1) Migrate the test_xdp_meta.sh BPF selftest into test_progs
framework, from Bastien Curutchet.
2) Add ability to configure head/tailroom for netkit devices,
from Daniel Borkmann.
3) Fixes and improvements to the xdp_hw_metadata selftest,
from Song Yoong Siang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Extend netkit tests to validate set {head,tail}room
netkit: Add add netkit {head,tail}room to rt_link.yaml
netkit: Allow for configuring needed_{head,tail}room
selftests/bpf: Migrate test_xdp_meta.sh into xdp_context_test_run.c
selftests/bpf: test_xdp_meta: Rename BPF sections
selftests/bpf: Enable Tx hwtstamp in xdp_hw_metadata
selftests/bpf: Actuate tx_metadata_len in xdp_hw_metadata
====================
Link: https://patch.msgid.link/20250107130908.143644-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when we run the BPF selftests with the following command:
make -C tools/testing/selftests TARGETS=bpf SKIP_TARGETS=""
The command generates untracked files and directories with make version
less than 4.4:
'''
Untracked files:
(use "git add <file>..." to include in what will be committed)
tools/testing/selftests/bpfFEATURE-DUMP.selftests
tools/testing/selftests/bpffeature/
'''
We lost slash after word "bpf". The reason is slash appending code is as
follow:
'''
OUTPUT := $(OUTPUT)/
$(eval include ../../../build/Makefile.feature)
OUTPUT := $(patsubst %/,%,$(OUTPUT))
'''
This way of assigning values to OUTPUT will never be effective for the
variable OUTPUT provided via the command argument [1] and BPF makefile
is called from parent Makfile(tools/testing/selftests/Makefile) like:
'''
all:
...
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET
'''
According to GNU make, we can use override Directive to fix this issue [2].
[1] https://www.gnu.org/software/make/manual/make.html#Overriding
[2] https://www.gnu.org/software/make/manual/make.html#Override-Directive
Fixes: dc3a8804d7 ("selftests/bpf: Adapt OUTPUT appending logic to lower versions of Make")
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20241224075957.288018-1-mrpre@163.com
BPF_TARGET_ENDIAN is used in CLANG_BPF_BUILD_RULE and co macros.
It is defined as a recursively expanded variable, meaning that it is
recomputed each time the value is needed. Thus, it is recomputed for
each *.bpf.o file compilation. The variable is computed by running a C
compiler in a shell. This significantly hinders parallel build
performance for *.bpf.o files.
This commit changes BPF_TARGET_ENDIAN to be a simply expanded
variable.
# Build performance stats before this commit
$ git clean -xfd; time make -j12
real 1m0.000s
...
# Build performance stats after this commit
$ git clean -xfd; time make -j12
real 0m43.605s
...
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241213003224.837030-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The selftests build four kernel modules which use copy-pasted Makefile
targets. This is a bit messy, and doesn't scale so well when we add more
modules, so let's consolidate these rules into a single rule generated
for each module name, and move the module sources into a single
directory.
To avoid parallel builds of the different modules stepping on each
other's toes during the 'modpost' phase of the Kbuild 'make modules',
the module files should really be a grouped target. However, make only
added explicit support for grouped targets in version 4.3, which is
newer than the minimum version supported by the kernel. However, make
implicitly treats pattern matching rules with multiple targets as a
grouped target, so we can work around this by turning the rule into a
pattern matching target. We do this by replacing '.ko' with '%ko' in the
targets with subst().
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/20241204-bpf-selftests-mod-compile-v5-1-b96231134a49@redhat.com
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
In order to specify extra compilation or linking flags to BPF selftests,
it is possible to set EXTRA_CFLAGS and EXTRA_LDFLAGS from the command
line. The problem is that they are not propagated to sub-make calls
(runqslower, bpftool, libbpf) and in the better case are not applied, in
the worse case cause the entire build fail.
Propagate EXTRA_CFLAGS and EXTRA_LDFLAGS to the sub-makes.
This, for instance, allows to build selftests as PIE with
$ make EXTRA_CFLAGS='-fPIE' EXTRA_LDFLAGS='-pie'
Without this change, the command would fail because libbpf.a would not
be built with -fPIE and other PIE binaries would not link against it.
The only problem is that we have to explicitly provide empty
EXTRA_CFLAGS='' and EXTRA_LDFLAGS='' to the builds of kernel modules as
we don't want to build modules with flags used for userspace (the above
example would fail as kernel doesn't support PIE).
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-10-31
We've added 13 non-merge commits during the last 16 day(s) which contain
a total of 16 files changed, 710 insertions(+), 668 deletions(-).
The main changes are:
1) Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it, from Puranjay Mohan.
2) Rewrite and migrate the test_tcp_check_syncookie.sh BPF selftest
into test_progs so that it can be run in BPF CI, from Alexis Lothoré.
3) Two BPF sockmap selftest fixes, from Zijian Zhang.
4) Small XDP synproxy BPF selftest cleanup to remove IP_DF check,
from Vincent Li.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add a selftest for bpf_csum_diff()
selftests/bpf: Don't mask result of bpf_csum_diff() in test_verifier
bpf: bpf_csum_diff: Optimize and homogenize for all archs
net: checksum: Move from32to16() to generic header
selftests/bpf: remove xdp_synproxy IP_DF check
selftests/bpf: remove test_tcp_check_syncookie
selftests/bpf: test MSS value returned with bpf_tcp_gen_syncookie
selftests/bpf: add ipv4 and dual ipv4/ipv6 support in btf_skc_cls_ingress
selftests/bpf: get rid of global vars in btf_skc_cls_ingress
selftests/bpf: add missing ns cleanups in btf_skc_cls_ingress
selftests/bpf: factorize conn and syncookies tests in a single runner
selftests/bpf: Fix txmsg_redir of test_txmsg_pull in test_sockmap
selftests/bpf: Fix msg_verify_data in test_sockmap
====================
Link: https://patch.msgid.link/20241031221543.108853-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There exist compiler flags supported by GCC but not supported by Clang
(e.g. -specs=...). Currently, these cannot be passed to BPF selftests
builds, even when building with GCC, as some binaries (urandom_read and
liburandom_read.so) are always built with Clang and the unsupported
flags make the compilation fail (as -Werror is turned on).
Add -Wno-unused-command-line-argument to these rules to suppress such
errors.
This allows to do things like:
$ CFLAGS="-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1" \
make -C tools/testing/selftests/bpf
Without this patch, the compilation would fail with:
[...]
clang: error: argument unused during compilation: '-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1' [-Werror,-Wunused-command-line-argument]
make: *** [Makefile:273: /bpf-next/tools/testing/selftests/bpf/liburandom_read.so] Error 1
[...]
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/2d349e9d5eb0a79dd9ff94b496769d64e6ff7654.1730449390.git.vmalik@redhat.com
Linking of urandom_read and liburandom_read.so prefers LLVM's 'ld.lld' but
falls back to using 'ld' if unsupported. However, this fallback discards
any existing makefile macro for LD and can break cross-compilation.
Fix by changing the fallback to use the target linker $(LD), passed via
'-fuse-ld=' using an absolute path rather than a linker "flavour".
Fixes: 08c79c9cd6 ("selftests/bpf: Don't force lld on non-x86 architectures")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241009040720.635260-1-tony.ambardar@gmail.com
The prog_tests programs do not include the per-arch tools include
path, e.g. tools/arch/riscv/include. Some architectures depend those
files to build properly.
Include tools/arch/$(SUBARCH)/include in the selftests bpf build.
Fixes: 6d74d178fe ("tools: Add riscv barrier implementation")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240927131355.350918-2-bjorn@kernel.org
Add a new set of tests validating behavior of capturing stack traces
with build ID. We extend uprobe_multi target binary with ability to
trigger uprobe (so that we can capture stack traces from it), but also
we allow to force build ID data to be either resident or non-resident in
memory (see also a comment about quirks of MADV_PAGEOUT).
That way we can validate that in non-sleepable context we won't get
build ID (as expected), but with sleepable uprobes we will get that
build ID regardless of it being physically present in memory.
Also, we add a small add-on linker script which reorders
.note.gnu.build-id section and puts it after (big) .text section,
putting build ID data outside of the very first page of ELF file. This
will test all the relaxations we did in build ID parsing logic in kernel
thanks to freader abstraction.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Save pkg-config output for libpcap as simply-expanded variables.
For an obscure reason 'shell' call in LDLIBS/CFLAGS recursively
expanded variables makes *.test.o files compilation non-parallel
when make is executed with -j option.
While at it, reuse 'pkg-config --cflags' call to define
-DTRAFFIC_MONITOR=1 option, it's exit status is the same as for
'pkg-config --exists'.
Fixes: f52403b6bf ("selftests/bpf: Add traffic monitor functions.")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823194409.774815-1-eddyz87@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This commit adds a utility function to get disassembled text for jited
representation of a BPF program designated by file descriptor.
Function prototype looks as follows:
int get_jited_program_text(int fd, char *text, size_t text_sz)
Where 'fd' is a file descriptor for the program, 'text' and 'text_sz'
refer to a destination buffer for disassembled text.
Output format looks as follows:
18: 77 06 ja L0
1a: 50 pushq %rax
1b: 48 89 e0 movq %rsp, %rax
1e: eb 01 jmp L1
20: 50 L0: pushq %rax
21: 50 L1: pushq %rax
^ ^^^^^^^^ ^ ^^^^^^^^^^^^^^^^^^
| binary insn | textual insn
| representation | representation
| |
instruction offset inferred local label name
The code and makefile changes are inspired by jit_disasm.c from bpftool.
Use llvm libraries to disassemble BPF program instead of libbfd to avoid
issues with disassembly output stability pointed out in [1].
Selftests makefile uses Makefile.feature to detect if LLVM libraries
are available. If that is not the case selftests build proceeds but
the function returns -EOPNOTSUPP at runtime.
[1] commit eb9d1acf63 ("bpftool: Add LLVM as default library for disassembling JIT-ed programs")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add functions that capture packets and print log in the background. They
are supposed to be used for debugging flaky network test cases. A monitored
test case should call traffic_monitor_start() to start a thread to capture
packets in the background for a given namespace and call
traffic_monitor_stop() to stop capturing. (Or, option '-m' implemented by
the later patches.)
lo In IPv4 127.0.0.1:40265 > 127.0.0.1:55907: TCP, length 68, SYN
lo In IPv4 127.0.0.1:55907 > 127.0.0.1:40265: TCP, length 60, SYN, ACK
lo In IPv4 127.0.0.1:40265 > 127.0.0.1:55907: TCP, length 60, ACK
lo In IPv4 127.0.0.1:55907 > 127.0.0.1:40265: TCP, length 52, ACK
lo In IPv4 127.0.0.1:40265 > 127.0.0.1:55907: TCP, length 52, FIN, ACK
lo In IPv4 127.0.0.1:55907 > 127.0.0.1:40265: TCP, length 52, RST, ACK
Packet file: packets-2173-86-select_reuseport:sockhash_IPv4_TCP_LOOPBACK_test_detach_bpf-test.log
#280/87 select_reuseport/sockhash IPv4/TCP LOOPBACK test_detach_bpf:OK
The above is the output of an example. It shows the packets of a connection
and the name of the file that contains captured packets in the directory
/tmp/tmon_pcap. The file can be loaded by tcpdump or wireshark.
This feature only works if libpcap is available. (Could be found by pkg-config)
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240815053254.470944-2-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
test_skb_cgroup_id_user allows testing skb cgroup id retrieval at different
levels, but is not integrated in test_progs, so it is not run
automatically in CI. The test overlaps a bit with
cgroup_skb_sk_lookup_kern, which is integrated in test_progs and test
extensively skb cgroup helpers, but there is still one major difference
between the two tests which justifies the conversion:
cgroup_skb_sk_lookup_kern deals with a BPF_PROG_TYPE_CGROUP_SKB (attached
on a cgroup), while test_skb_cgroup_id_user deals with a
BPF_PROG_TYPE_SCHED_CLS (attached on a qdisc)
Convert test_skb_cgroup_id_user into test_progs framework in order to run
it automatically in CI. The main differences with the original test are the
following:
- rename the test to make it shorter and more straightforward regarding
tested feature
- the wrapping shell script has been dropped since every setup step is now
handled in the main C test file
- the test has been renamed for a shorter name and reflecting the tested
API
- add dedicated assert log per level to ease test failure debugging
- use global variables instead of maps to access bpf prog data
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-4-a33c03458cf6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
test_cgroup_storage is currently a standalone program which is not run
when executing test_progs.
Convert it to the test_progs framework so it can be automatically executed
in CI. The conversion led to the following changes:
- converted the raw bpf program in the userspace test file into a dedicated
test program in progs/ dir
- reduced the scope of cgroup_storage test: the content from this test
overlaps with some other tests already present in test_progs, most
notably netcnt and cgroup_storage_multi*. Those tests already check
extensively local storage, per-cpu local storage, cgroups interaction,
etc. So the new test only keep the part testing that the program return
code (based on map content) properly leads to packet being passed or
dropped.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-2-a33c03458cf6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
get_current_cgroup_id_user allows testing for bpf_get_current_cgroup_id()
bpf API but is not integrated into test_progs, and so is not tested
automatically in CI.
Convert it to the test_progs framework to allow running it automatically.
The most notable differences with the old test are the following:
- the new test relies on autoattach instead of manually hooking/enabling
the targeted tracepoint through perf_event, which reduces quite a lot the
test code size
- it also accesses bpf prog data through global variables instead of maps
- sleep duration passed to nanosleep syscall has been reduced to its
minimum to not impact overall CI duration (we only care about the syscall
being properly triggered, not about the passed duration)
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-1-a33c03458cf6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
test_dev_cgroup is defined as a standalone test program, and so is not
executed in CI.
Convert it to test_progs framework so it is tested automatically in CI, and
remove the old test. In order to be able to run it in test_progs, /dev/null
must remain usable, so change the new test to test operations on devices
1:3 as valid, and operations on devices 1:5 (/dev/zero) as invalid.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240731-convert_dev_cgroup-v4-2-849425d90de6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
test_xdp_veth.sh tests that XDP return codes work as expected, by bringing
up multiple veth pairs isolated in different namespaces, attaching specific
xdp programs to each interface, and ensuring that the whole chain allows to
ping one end interface from the first one. The test runs well but is
currently not integrated in test_progs, which prevents it from being run
automatically in the CI infrastructure.
Rewrite it as a C test relying on libbpf to allow running it in the CI
infrastructure. The new code brings up the same network infrastructure and
reuses the same eBPF programs as test_xdp_veth.sh, for which skeletons are
already generated by the bpf tests makefile.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240721-convert_test_xdp_veth-v4-2-23bdba21b2f9@bootlin.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
struct bpf_insn *disasm_insn(struct bpf_insn *insn, char *buf, size_t buf_sz);
Disassembles instruction 'insn' to a text buffer 'buf'.
Removes insn->code hex prefix added by kernel disassembly routine.
Returns a pointer to the next instruction
(increments insn by either 1 or 2).
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Make log output incorrectly shows 'test_maps' as the binary name for every
'CLNG-BPF' build step, apparently picking up the last value defined for the
$(TRUNNER_BINARY) variable. Update the 'CLANG_BPF_BUILD_RULE' variants to
fix this confusing output.
Current output:
CLNG-BPF [test_maps] access_map_in_map.bpf.o
GEN-SKEL [test_progs] access_map_in_map.skel.h
...
CLNG-BPF [test_maps] access_map_in_map.bpf.o
GEN-SKEL [test_progs-no_alu32] access_map_in_map.skel.h
...
CLNG-BPF [test_maps] access_map_in_map.bpf.o
GEN-SKEL [test_progs-cpuv4] access_map_in_map.skel.h
After fix:
CLNG-BPF [test_progs] access_map_in_map.bpf.o
GEN-SKEL [test_progs] access_map_in_map.skel.h
...
CLNG-BPF [test_progs-no_alu32] access_map_in_map.bpf.o
GEN-SKEL [test_progs-no_alu32] access_map_in_map.skel.h
...
CLNG-BPF [test_progs-cpuv4] access_map_in_map.bpf.o
GEN-SKEL [test_progs-cpuv4] access_map_in_map.skel.h
Fixes: a5d0c26a27 ("selftests/bpf: Add a cpuv4 test runner for cpu=v4 testing")
Fixes: 89ad7420b2 ("selftests/bpf: Drop the need for LLVM's llc")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240720052535.2185967-1-tony.ambardar@gmail.com
Linking uprobe_multi.c on mips64el fails due to relocation overflows, when
the GOT entries required exceeds the default maximum. Add a specific CFLAGS
(-mxgot) for uprobe_multi.c on MIPS that allows using a larger GOT and
avoids errors such as:
/tmp/ccBTNQzv.o: in function `bench':
uprobe_multi.c:49:(.text+0x1d7720): relocation truncated to fit: R_MIPS_GOT_DISP against `uprobe_multi_func_08188'
uprobe_multi.c:49:(.text+0x1d7730): relocation truncated to fit: R_MIPS_GOT_DISP against `uprobe_multi_func_08189'
...
collect2: error: ld returned 1 exit status
Fixes: 519dfeaf51 ("selftests/bpf: Add uprobe_multi test program")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/14eb7b70f8ccef9834874d75eb373cb9292129da.1721692479.git.tony.ambardar@gmail.com
Jakub reports build failures when merging linux/master with net tree:
CXX test_cpp
In file included from <built-in>:454:
<command line>:2:9: error: '_GNU_SOURCE' macro redefined [-Werror,-Wmacro-redefined]
2 | #define _GNU_SOURCE
| ^
<built-in>:445:9: note: previous definition is here
445 | #define _GNU_SOURCE 1
The culprit is commit cc937dad85 ("selftests: centralize -D_GNU_SOURCE= to
CFLAGS in lib.mk") which unconditionally added -D_GNU_SOUCE to CLFAGS.
Apparently clang++ also unconditionally adds it for the C++ targets [0]
which causes a conflict. Add small change in the selftests makefile
to filter it out for test_cpp.
Not sure which tree it should go via, targeting bpf for now, but net
might be better?
0: https://stackoverflow.com/questions/11670581/why-is-gnu-source-defined-by-default-and-how-to-turn-it-off
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240725214029.1760809-1-sdf@fomichev.me
Make use of -M compiler options when building .test.o objects to
generate .d files and avoid re-building all tests every time.
Previously, if a single test bpf program under selftests/bpf/progs/*.c
has changed, make would rebuild all the *.bpf.o, *.skel.h and *.test.o
objects, which is a lot of unnecessary work.
A typical dependency chain is:
progs/x.c -> x.bpf.o -> x.skel.h -> x.test.o -> trunner_binary
However for many tests it's not a 1:1 mapping by name, and so far
%.test.o have been simply dependent on all %.skel.h files, and
%.skel.h files on all %.bpf.o objects.
Avoid full rebuilds by instructing the compiler (via -MMD) to
produce *.d files with real dependencies, and appropriately including
them. Exploit make feature that rebuilds included makefiles if they
were changed by setting %.test.d as prerequisite for %.test.o files.
A couple of examples of compilation time speedup (after the first
clean build):
$ touch progs/verifier_and.c && time make -j8
Before: real 0m16.651s
After: real 0m2.245s
$ touch progs/read_vsyscall.c && time make -j8
Before: real 0m15.743s
After: real 0m1.575s
A drawback of this change is that now there is an overhead due to make
processing lots of .d files, which potentially may slow down unrelated
targets. However a time to make all from scratch hasn't changed
significantly:
$ make clean && time make -j8
Before: real 1m31.148s
After: real 1m30.309s
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/VJihUTnvtwEgv_mOnpfy7EgD9D2MPNoHO-MlANeLIzLJPGhDeyOuGKIYyKgk0O6KPjfM-MuhtvPwZcngN8WFqbTnTRyCSMc2aMZ1ODm1T_g=@pm.me
