With a vIOMMU object, use space can flush any IOMMU related cache that can
be directed via a vIOMMU object. It is similar to the IOMMU_HWPT_INVALIDATE
uAPI, but can cover a wider range than IOTLB, e.g. device/desciprtor cache.
Allow hwpt_id of the iommu_hwpt_invalidate structure to carry a viommu_id,
and reuse the IOMMU_HWPT_INVALIDATE uAPI for vIOMMU invalidations. Drivers
can define different structures for vIOMMU invalidations v.s. HWPT ones.
Since both the HWPT-based and vIOMMU-based invalidation pathways check own
cache invalidation op, remove the WARN_ON_ONCE in the allocator.
Update the uAPI, kdoc, and selftest case accordingly.
Link: https://patch.msgid.link/r/b411e2245e303b8a964f39f49453a5dff280968f.1730836308.git.nicolinc@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This results in passing 0 or just IOMMU_CACHE to iommu_map(). Most of
the page table formats don't like this:
amdv1 - -EINVAL
armv7s - returns 0, doesn't update mapped
arm-lpae - returns 0 doesn't update mapped
dart - returns 0, doesn't update mapped
VT-D - returns -EINVAL
Unfortunately the three formats that return 0 cause serious problems:
- Returning ret = but not uppdating mapped from domain->map_pages()
causes an infinite loop in __iommu_map()
- Not writing ioptes means that VFIO/iommufd have no way to recover them
and we will have memory leaks and worse during unmap
Since almost nothing can support this, and it is a useless thing to do,
block it early in iommufd.
Cc: stable@kernel.org
Fixes: aad37e71d5 ("iommufd: IOCTLs for the io_pagetable")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/1-v1-1211e1294c27+4b1-iommu_no_prot_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Lu Baolu says:
====================
This series implements the functionality of delivering IO page faults to
user space through the IOMMUFD framework. One feasible use case is the
nested translation. Nested translation is a hardware feature that supports
two-stage translation tables for IOMMU. The second-stage translation table
is managed by the host VMM, while the first-stage translation table is
owned by user space. This allows user space to control the IOMMU mappings
for its devices.
When an IO page fault occurs on the first-stage translation table, the
IOMMU hardware can deliver the page fault to user space through the
IOMMUFD framework. User space can then handle the page fault and respond
to the device top-down through the IOMMUFD. This allows user space to
implement its own IO page fault handling policies.
User space application that is capable of handling IO page faults should
allocate a fault object, and bind the fault object to any domain that it
is willing to handle the fault generatd for them. On a successful return
of fault object allocation, the user can retrieve and respond to page
faults by reading or writing to the file descriptor (FD) returned.
The iommu selftest framework has been updated to test the IO page fault
delivery and response functionality.
====================
* iommufd_pri:
iommufd/selftest: Add coverage for IOPF test
iommufd/selftest: Add IOPF support for mock device
iommufd: Associate fault object with iommufd_hw_pgtable
iommufd: Fault-capable hwpt attach/detach/replace
iommufd: Add iommufd fault object
iommufd: Add fault and response message definitions
iommu: Extend domain attach group with handle support
iommu: Add attach handle to struct iopf_group
iommu: Remove sva handle list
iommu: Introduce domain attachment handle
Link: https://lore.kernel.org/all/20240702063444.105814-1-baolu.lu@linux.intel.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Extend the selftest tool to add coverage of testing IOPF handling. This
would include the following tests:
- Allocating and destroying an iommufd fault object.
- Allocating and destroying an IOPF-capable HWPT.
- Attaching/detaching/replacing an IOPF-capable HWPT on a device.
- Triggering an IOPF on the mock device.
- Retrieving and responding to the IOPF through the file interface.
Link: https://lore.kernel.org/r/20240702063444.105814-11-baolu.lu@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With 64k base pages, the first 128k iova length test requires less than a
byte for a bitmap, exposing a bug in the tests that assume that bitmaps are
at least a byte.
Rather than dealing with bytes, have _test_mock_dirty_bitmaps() pass the
number of bits. The caller functions are adjusted to also use bits as well,
and converting to bytes when clearing, allocating and freeing the bitmap.
Link: https://lore.kernel.org/r/20240627110105.62325-2-joao.m.martins@oracle.com
Reported-by: Matt Ochs <mochs@nvidia.com>
Fixes: a9af47e382 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Matt Ochs <mochs@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leverage previously added MOCK_FLAGS_DEVICE_HUGE_IOVA flag to create an
IOMMU domain with more than MOCK_IO_PAGE_SIZE supported.
Plumb the hugetlb backing memory for buffer allocation and change the
expected page size to MOCK_HUGE_PAGE_SIZE (1M) when hugepage variant test
cases are used. These so far are limited to 128M and 256M IOVA range tests
cases which is when 1M hugepages can be used.
Link: https://lore.kernel.org/r/20240202133415.23819-9-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Rework the functions that test and set the bitmaps to receive a new
parameter (the pte_page_size) that reflects the expected PTE size in the
page tables. The same scheme is still used i.e. even bits are dirty and
odd page indexes aren't dirty. Here it just refactors to consider the size
of the PTE rather than hardcoded to IOMMU mock base page assumptions.
While at it, refactor dirty bitmap tests to use the idev_id created by the
fixture instead of creating a new one.
This is in preparation for doing tests with IOMMU hugepages where multiple
bits set as part of recording a whole hugepage as dirty and thus the
pte_page_size will vary depending on io hugepages or io base pages.
Link: https://lore.kernel.org/r/20240202133415.23819-6-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Exercise the dirty tracking bitmaps with byte unaligned addresses in
addition to the PAGE_SIZE unaligned bitmaps, using a address towards the
end of the page boundary.
In doing so, increase the tailroom we allocate for the bitmap from
MOCK_PAGE_SIZE(2K) into PAGE_SIZE(4K), such that we can test end of bitmap
boundary.
Link: https://lore.kernel.org/r/20240202133415.23819-4-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Change test_mock_dirty_bitmaps() to pass a flag where it specifies the flag
under test. The test does the same thing as the GET_DIRTY_BITMAP regular
test. Except that it tests whether the dirtied bits are fetched all the
same a second time, as opposed to observing them cleared.
Link: https://lore.kernel.org/r/20231024135109.73787-19-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new test ioctl for simulating the dirty IOVAs in the mock domain, and
implement the mock iommu domain ops that get the dirty tracking supported.
The selftest exercises the usual main workflow of:
1) Setting dirty tracking from the iommu domain
2) Read and clear dirty IOPTEs
Different fixtures will test different IOVA range sizes, that exercise
corner cases of the bitmaps.
Link: https://lore.kernel.org/r/20231024135109.73787-17-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
TEST_LENGTH passing ".size = sizeof(struct _struct) - 1" expects -EINVAL
from "if (ucmd.user_size < op->min_size)" check in iommufd_fops_ioctl().
This has been working when min_size is exactly the size of the structure.
However, if the size of the structure becomes larger than min_size, i.e.
the passing size above is larger than min_size, that min_size sanity no
longer works.
Since the first test in TEST_LENGTH() was to test that min_size sanity
routine, rework it to support a min_size calculation, rather than using
the full size of the structure.
Link: https://lore.kernel.org/r/20231015074648.24185-1-nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iommufd wants to use more infrastructure, like the iommu_group, that the
mock device does not support. Create a more complete mock device that can
go through the whole cycle of ownership, blocking domain, and has an
iommu_group.
This requires creating a real struct device on a real bus to be able to
connect it to a iommu_group. Unfortunately we cannot formally attach the
mock iommu driver as an actual driver as the iommu core does not allow
more than one driver or provide a general way for busses to link to
iommus. This can be solved with a little hack to open code the dev_iommus
struct.
With this infrastructure things work exactly the same as the normal domain
path, including the auto domains mechanism and direct attach of hwpts. As
the created hwpt is now an autodomain it is no longer required to destroy
it and trying to do so will trigger a failure.
Link: https://lore.kernel.org/r/11-v3-ae9c2975a131+2e1e8-iommufd_hwpt_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Cover the essential functionality of the iommufd with a directed test from
userspace. This aims to achieve reasonable functional coverage using the
in-kernel self test framework.
A second test does a failure injection sweep of the success paths to study
error unwind behaviors.
This allows achieving high coverage of the corner cases in pages.c.
The selftest requires CONFIG_IOMMUFD_TEST to be enabled, and several huge
pages which may require:
echo 4 > /proc/sys/vm/nr_hugepages
Link: https://lore.kernel.org/r/19-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> # s390
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Eric Auger <eric.auger@redhat.com> # aarch64
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
