Peter Collingbourne
|
19cf41b64e
|
lontium-lt9611: check a different register bit for HDMI sensing
It has been observed that with certain monitors such as the HP Z27n,
the register 0x825e reads a value of 0x79 when the HDMI cable is
connected and 0x78 when it is disconnected, i.e. bit 0 appears
to correspond to the HDMI connection status and bit 2 is never
set. Therefore, change the driver to check bit 0 instead of bit 2.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/I7e76411127e1ce4988a3f6d0c8ba5f1c3d880c23
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117020724.2647769-1-pcc@google.com
|
2021-11-30 13:03:04 +01:00 |
|
Maxime Ripard
|
fef604db23
|
drm/bridge: lt9611: Register and attach our DSI device at probe
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-9-maxime@cerno.tech
|
2021-10-27 22:07:57 +02:00 |
|
Maxime Ripard
|
b91df118e4
|
drm/bridge: lt9611: Switch to devm MIPI-DSI helpers
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-8-maxime@cerno.tech
|
2021-10-27 22:07:56 +02:00 |
|
Zou Wei
|
8d0b1fe81e
|
drm/bridge: lt9611: Add missing MODULE_DEVICE_TABLE
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1620801955-19188-1-git-send-email-zou_wei@huawei.com
|
2021-05-17 10:41:13 +02:00 |
|
Robert Foss
|
d1a97648ae
|
drm/bridge: lt9611: Fix handling of 4k panels
4k requires two dsi pipes, so don't report MODE_OK when only a
single pipe is configured. But rather report MODE_PANEL to
signal that requirements of the panel are not being met.
Reported-by: Peter Collingbourne <pcc@google.com>
Suggested-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Anibal Limon <anibal.limon@linaro.org>
Tested-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201217140933.1133969-1-robert.foss@linaro.org
|
2021-03-25 16:18:31 +01:00 |
|
Vinod Koul
|
85a5167366
|
drm/bridge: Fix the dsi remote end-points
DSI end-points are supposed to be at node 0 and node 1 as per binding.
So fix this and use node 0 and node 1 for dsi.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 23278bf54a ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200828074251.3788165-1-vkoul@kernel.org
|
2020-08-29 23:02:34 +02:00 |
|
Vinod Koul
|
23278bf54a
|
drm/bridge: Introduce LT9611 DSI to HDMI bridge
Lontium Lt9611 is a DSI to HDMI bridge which supports two DSI ports and
I2S port as an input and HDMI port as output
Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> # fix lt9611_bridge_mode_valid
Link: https://patchwork.freedesktop.org/patch/msgid/20200723163442.1280414-4-vkoul@kernel.org
|
2020-07-26 16:55:49 +02:00 |
|