Generally a good idea between VM sessions. We need a way to
detect VM pass-through in general and always run asic_init in
that case.
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This table is found on boards that support SR-IOV. This will
be used to determine if the board supports SR-IOV and allow
the driver to take specific action in certain cases.
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ACP IP have internal DMA controller, DW I2S controller and DSPs
as separate power tiles. DMA and I2S devices are added to generic
pm domain, so that entire IP can be powered off/on at appropriate
times. Unused DSPs are made to be powered off though they are powered
on during ACP pm domain power on sequence.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we can't copy entries from the GTT or fill them with one command split
up the mapping operation into multiple ones.
v2: agd: rebase on upstream
v3: squash in Christian's fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That allows the VM code to use GART BOs from other driver instances.
v2: don't use copy optimization for foreign GARTs, that won't work.
v3: some more comment cleanups
v4: agd: rebase on upstream
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to duplicate that code over and over again. Also stop using the
flags to determine if we need to map the addresses.
v2: constify the pages_addr
v3: rebased, fix typo in commit message
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new sysfs interfaces:
pp_num_states: Read-only, return the number of all pp states, 0 if powerplay is not available.
pp_cur_state: Read-only, return the index number of current pp state.
pp_force_state: Read-write, to write a power state index will switch to selected state forcedly and
enable forced state mode, disable forced state mode. such as "echo >...".
pp_table: Read-write, binary output, to be used to read or write the dpm table, the maximum
file size is 4KB of page size.
pp_dpm_sclk: Read-write, reading will return a dpm levels list, to write an index number will force
powerplay to set the corresponding dpm level.
pp_dpm_mclk: same as sclk.
pp_dpm_pcie: same as sclk.
And add new setting "manual" to the existing interface power_dpm_force_performance_level.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows the scheduler to handle the dependencies on ID contention as well.
v2: grab id only once
v3: use a separate lock for the VMIDs
v4: cleanup after semaphore removal
v5: minor coding style change
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It doesn't currently do anything and there's no need for it
going forward since pci config reset will be required as a
fallback even when we have fine grained reset implemented.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we could try to evict overlapping userptr BOs in get_user_pages(),
leading to a possible circular locking dependency.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
- fix and enable iceland/topaz support
- handle WC on platforms that don't support it
* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: disable uvd and vce clockgating on Fiji
drm/amdgpu: remove exp hardware support from iceland
drm/amdgpu: load MEC ucode manually on iceland
drm/amdgpu: don't load MEC2 on topaz
drm/amdgpu: drop topaz support from gmc8 module
drm/amdgpu: pull topaz gmc bits into gmc_v7
drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above
drm/amdgpu: iceland use CI based MC IP
drm/amdgpu: move gmc7 support out of CIK dependency
drm/amdgpu/gfx7: enable cp inst/reg error interrupts
drm/amdgpu/gfx8: enable cp inst/reg error interrupts
drm/amdgpu: mask out WC from BO on unsupported arches
drm/radeon: mask out WC from BO on unsupported arches
drm: add helper to check for wc memory support
drm/amdgpu: no need to load MC firmware on fiji
two static checker fixes.
* tag 'drm-amdkfd-fixes-2016-01-28' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Remove unnecessary cast in kfree
drm/amdgpu: fix non-ANSI declaration of amdgpu_amdkfd_gfx_*_get_functions()
