Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a workload is too heavy to finish it in gpu hang check timer
intervals(1.5), gpu hang check function will check ACTHD register
value to decide whether gpu is real dead or not. On real hw,
ACTHD is updated by HW when workload is running, then host kernel
won't think it is gpu hang. while guest kernel always read a constant
ACTHD value as GVT doesn't supply ACTHD emulate handler, then
guest kernel detects a fake gpu hang.
To remove such guest fake gpu hang, this patch supply ACTHD
mmio read handler which read real HW ACTHD register directly.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b4c9a097-3e62-124e-6856-b0c37764df7b@intel.com
The mmio read handler for ring timestmap / instdone register are same
as reading hw value directly.
Extract it as common function to reduce code duplications.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Inspect if the host has VCS2 ring by host i915 macro in MMIO_RING_F().
Also this helps on reducing some LOCs.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Need to check valid state for per_ctx bb and bypass batch buffer
combine for scan if necessary. Otherwise adding invalid MI batch
buffer start cmd for per_ctx bb will cause scan failure, which is
taken as -EFAULT now so vGPU would be put in failsafe. This trys
to fix that by checking per_ctx bb valid state. Also remove old
invalid WARNING that indirect ctx bb shouldn't depend on valid
per_ctx bb.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
We have implemented delayed ring mmio switch mechanism to reduce
unnecessary mmio switch. While the vGPU is being destroyed or
detached from VM, we need to force the ring switch to host context.
The later deadline is missed. Then it got a chance that word load
from VM2 might execute under the ring context of VM1 which was
attached to a same vGPU instance. Finally, the GPU is hang.
This patch guarantee the two deadline are performed.
v2: Remove unused variable 'scheduler'
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Looking at our virtual PCI device, we can see surprising Region 4 and Region 5.
00:10.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 06) (prog-if 00 [VGA controller])
....
Region 0: Memory at 140000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 180000000 (64-bit, prefetchable) [size=1G]
Region 4: Memory at <ignored> (32-bit, non-prefetchable)
Region 5: Memory at <ignored> (32-bit, non-prefetchable)
Expansion ROM at febd6000 [disabled] [size=2K]
The fact is that we only implemented BAR0 and BAR2. Surprising Region 4 and
Region 5 are shown because we report their size as 0xffffffff. They should
report size 0 instead.
BTW, the physical GPU has a PIO BAR. GVTg hasn't implemented PIO access, so
we ignored this BAR for vGPU device.
v2: fix BAR size value calculation.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458032
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit f1751362d6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pull i916 drm fixes from Rodrigo Vivi:
"Since Dave is on paternity leave we are sending drm/i915 fixes for
v4.14-rc1 directly to you as he had asked us to do.
The most critical ones are the GPU reset fix for gen2-4 and GVT fix
for a regression that is blocking gvt init to work on your tree.
The rest is general fixes for patches coming from drm-next"
Acked-by: Dave Airlie <airlied@redhat.com>
* tag 'drm-intel-next-fixes-2017-09-07' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Re-enable GTT following a device reset
drm/i915: Annotate user relocs with __user
drm/i915: Silence sparse by using gfp_t
drm/i915: Add __rcu to radix tree slot pointer
drm/i915: Fix the missing PPAT cache attributes on CNL
drm/i915/gvt: Remove one duplicated MMIO
drm/i915: Fix enum pipe vs. enum transcoder for the PCH transcoder
drm/i915: Make i2c lock ops static
drm/i915: Make i9xx_load_ycbcr_conversion_matrix() static
drm/i915/edp: Increase T12 panel delay to 900 ms to fix DP AUX CH timeouts
drm/i915: Ignore duplicate VMA stored within the per-object handle LUT
drm/i915: Skip fence alignemnt check for the CCS plane
drm/i915: Treat fb->offsets[] as a raw byte offset instead of a linear offset
drm/i915: Always wake the device to flush the GTT
drm/i915: Recreate vmapping even when the object is pinned
drm/i915: Quietly cancel FBC activation if CRTC is turned off before worker
Remove one duplicated MMIO GEN6_PCODE_MAILBOX. Duplicated MMIO will
cause host GVT-g initialization failure.
Fixes: 9c3a16c887 ("drm/i915/hsw+: Add support for multiple power well regs")
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.14 merge window.
I'm sending this early, as my continuing journey into fatherhood is
occurring really soon now, I'm going to be mostly useless for the next
couple of weeks, though I may be able to read email, I doubt I'll be
doing much patch applications or git sending. If anything urgent pops
up I've asked Daniel/Jani/Alex/Sean to try and direct stuff towards
you.
Outside drm changes:
Some rcar-du updates that touch the V4L tree, all acks should be in
place. It adds one export to the radix tree code for new i915 use
case. There are some minor AGP cleanups (don't see that too often).
Changes to the vbox driver in staging to avoid breaking compilation.
Summary:
core:
- Atomic helper fixes
- Atomic UAPI fixes
- Add YCBCR 4:2:0 support
- Drop set_busid hook
- Refactor fb_helper locking
- Remove a bunch of internal APIs
- Add a bunch of better default handlers
- Format modifier/blob plane property added
- More internal header refactoring
- Make more internal API names consistent
- Enhanced syncobj APIs (wait/signal/reset/create signalled)
bridge:
- Add Synopsys Designware MIPI DSI host bridge driver
tiny:
- Add Pervasive Displays RePaper displays
- Add support for LEGO MINDSTORMS EV3 LCD
i915:
- Lots of GEN10/CNL support patches
- drm syncobj support
- Skylake+ watermark refactoring
- GVT vGPU 48-bit ppgtt support
- GVT performance improvements
- NOA change ioctl
- CCS (color compression) scanout support
- GPU reset improvements
amdgpu:
- Initial hugepage support
- BO migration logic rework
- Vega10 improvements
- Powerplay fixes
- Stop reprogramming the MC
- Fixes for ACP audio on stoney
- SR-IOV fixes/improvements
- Command submission overhead improvements
amdkfd:
- Non-dGPU upstreaming patches
- Scratch VA ioctl
- Image tiling modes
- Update PM4 headers for new firmware
- Drop all BUG_ONs.
nouveau:
- GP108 modesetting support.
- Disable MSI on big endian.
vmwgfx:
- Add fence fd support.
msm:
- Runtime PM improvements
exynos:
- NV12MT support
- Refactor KMS drivers
imx-drm:
- Lock scanout channel to improve memory bw
- Cleanups
etnaviv:
- GEM object population fixes
tegra:
- Prep work for Tegra186 support
- PRIME mmap support
sunxi:
- HDMI support improvements
- HDMI CEC support
omapdrm:
- HDMI hotplug IRQ support
- Big driver cleanup
- OMAP5 DSI support
rcar-du:
- vblank fixes
- VSP1 updates
arcgpu:
- Minor fixes
stm:
- Add STM32 DSI controller driver
dw_hdmi:
- Add support for Rockchip RK3399
- HDMI CEC support
atmel-hlcdc:
- Add 8-bit color support
vc4:
- Atomic fixes
- New ioctl to attach a label to a buffer object
- HDMI CEC support
- Allow userspace to dictate rendering order on submit ioctl"
* tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux: (1074 commits)
drm/syncobj: Add a signal ioctl (v3)
drm/syncobj: Add a reset ioctl (v3)
drm/syncobj: Add a syncobj_array_find helper
drm/syncobj: Allow wait for submit and signal behavior (v5)
drm/syncobj: Add a CREATE_SIGNALED flag
drm/syncobj: Add a callback mechanism for replace_fence (v3)
drm/syncobj: add sync obj wait interface. (v8)
i915: Use drm_syncobj_fence_get
drm/syncobj: Add a race-free drm_syncobj_fence_get helper (v2)
drm/syncobj: Rename fence_get to find_fence
drm: kirin: Add mode_valid logic to avoid mode clocks we can't generate
drm/vmwgfx: Bump the version for fence FD support
drm/vmwgfx: Add export fence to file descriptor support
drm/vmwgfx: Add support for imported Fence File Descriptor
drm/vmwgfx: Prepare to support fence fd
drm/vmwgfx: Fix incorrect command header offset at restart
drm/vmwgfx: Support the NOP_ERROR command
drm/vmwgfx: Restart command buffers after errors
drm/vmwgfx: Move irq bottom half processing to threads
drm/vmwgfx: Don't use drm_irq_[un]install
...
once error happens in shadow_indirect_ctx function, the variable
wa_ctx->indirect_ctx.obj is not initialized but accessed, so the
kernel null point panic occurs.
Fixes: 894cf7d156 ("drm/i915/gvt: i915_gem_object_create() returns an error pointer")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Final pile of features for 4.14
- New ioctl to change NOA configurations, plus prep (Lionel)
- CCS (color compression) scanout support, based on the fancy new
modifier additions (Ville&Ben)
- Document i915 register macro style (Jani)
- Many more gen10/cnl patches (Rodrigo, Pualo, ...)
- More gpu reset vs. modeset duct-tape to restore the old way.
- prep work for cnl: hpd_pin reorg (Rodrigo), support for more power
wells (Imre), i2c pin reorg (Anusha)
- drm_syncobj support (Jason Ekstrand)
- forcewake vs gpu reset fix (Chris)
- execbuf speedup for the no-relocs fastpath, anv/vk low-overhead ftw (Chris)
- switch to idr/radixtree instead of the resizing ht for execbuf id->vma
lookups (Chris)
gvt:
- MMIO save/restore optimization (Changbin)
- Split workload scan vs. dispatch for more parallel exec (Ping)
- vGPU full 48bit ppgtt support (Joonas, Tina)
- vGPU hw id expose for perf (Zhenyu)
Bunch of work all over to make the igt CI runs more complete/stable.
Watch https://intel-gfx-ci.01.org/tree/drm-tip/shards-all.html for
progress in getting this ready. Next week we're going into production
mode (i.e. will send results to intel-gfx) on hsw, more platforms to
come.
Also, a new maintainer tram, I'm stepping out. Huge thanks to Jani for
being an awesome co-maintainer the past few years, and all the best
for Jani, Joonas&Rodrigo as the new maintainers!
* tag 'drm-intel-next-2017-08-18' of git://anongit.freedesktop.org/git/drm-intel: (179 commits)
drm/i915: Update DRIVER_DATE to 20170818
drm/i915/bxt: use NULL for GPIO connection ID
drm/i915: Mark the GT as busy before idling the previous request
drm/i915: Trivial grammar fix s/opt of/opt out of/ in comment
drm/i915: Replace execbuf vma ht with an idr
drm/i915: Simplify eb_lookup_vmas()
drm/i915: Convert execbuf to use struct-of-array packing for critical fields
drm/i915: Check context status before looking up our obj/vma
drm/i915: Don't use MI_STORE_DWORD_IMM on Sandybridge/vcs
drm/i915: Stop touching forcewake following a gen6+ engine reset
MAINTAINERS: drm/i915 has a new maintainer team
drm/i915: Split pin mapping into per platform functions
drm/i915/opregion: let user specify override VBT via firmware load
drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake.
drm/i915/gen10: implement gen 10 watermarks calculations
drm/i915/cnl: Fix LSPCON support.
drm/i915/vbt: ignore extraneous child devices for a port
drm/i915/cnl: Setup PAT Index.
drm/i915/edp: Allow alternate fixed mode for eDP if available.
drm/i915: Add support for drm syncobjs
...
Guest i915 full ppgtt functionality was blocking by an issue, which would
lead to gpu hardware hang. Guest i915 driver may update the ppgtt table
just before this workload is going to be submitted to the hardware by
device model. This case wasn't handled well by device model before, due
to the small time window between removing old ppgtt entry and adding the
new one. Errors occur when the workload is executed by hardware during
that small time window. This patch is to remove this time window by adding
the new ppgtt entry first and then remove the old one.
Changes in v2:
- Move VGT_CAPS_FULL_PPGTT introduction to patch 2/4. (Joonas)
Changes since v2:
- Divide the whole patch set into two separate patch series, with one
patch in i915 side to check guest i915 full ppgtt capability and enable
it when this capability is supported by the device model, and the other
one in gvt side which fixs the blocking issue and enables the device
model to provide the capability to guest. And this patch focuses on gvt
side. (Joonas)
- Change the title from "reorder the shadow ppgtt update process by adding
entry first" to "Fix guest i915 full ppgtt blocking issue". (Tina)
Changes since v3:
- Rebase to the latest branch.
Changes since v4:
- Tested by Tina Zhang.
Changes since v5:
- Rebase to the latest branch.
v6:
- Update full 48bit ppgtt definition
Cc: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The current context logic only updates the descriptor of context when
it's being pinned to graphics memory space. But this cannot satisfy the
requirement of shadow context. The addressing mode of the pinned shadow
context descriptor may be changed according to the guest addressing mode.
And this won't be updated, as the already pinned shadow context has no
chance to update its descriptor. And this will lead to GPU hang issue,
as shadow context is used with wrong descriptor. This patch fixes this
issue by letting the pinned shadow context descriptor update its
addressing mode on demand.
This patch fixes GPU HANG issue which happends after changing the
grub parameter i915.enable_ppgtt form 0x01 to 0x03 or vice versa and
then rebooting the guest.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Kechen Lu <kechen.lu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This exposes vGPU context hw id in mdev sysfs which is used to
do vGPU based profiling. Retrieved vGPU context hw id can be set
through i915 perf ioctl to set profiling for target vGPU.
Cc: Jiao Pengyuan <pengyuan.jiao@intel.com>
Cc: Niu Bing <bing.niu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When doing the VGPU reset, we don't need to do the gtt/ppgtt reset.
This will make the GVT to do the ppgtt shadow every time for
a workload and caused really bad performance after a VGPU reset.
This patch will make sure ppgtt clean only happen at device module
level reset to fix this.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When debugging the gtt code, found the intel_vgpu_gma_to_gpa() can
translate any given GMA though the GMA is not valid. This because
the GTT ops suppress the possible errors, which may result in an
invalid PT entry is retrieved by upper caller.
This patch changed the prototype of pte ops to propagate status to
callers. Then we make sure the GTT walker stop as early as when
a error is detected to prevent undefined behavior.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Need to take runtime pm when do early scan/shadow of workload
for request operations.
Fixes: 7fa56bd159bc ("drm/i915/gvt: Audit and shadow workload during ELSP writing")
Cc: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Use the exist function intel_gvt_ggtt_validate_range to replace
these duplicated code that do the same thing.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The function workload scan and shadow have to hold the drm.struct_mutex
before called. To avoid misusing of this function, add a lockdep assert
in it.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Let the workload audit and shadow ahead of vGPU scheduling, that
will eliminate GPU idle time and improve performance for multi-VM.
The performance of Heaven running simultaneously in 3VMs has
improved 20% after this patch.
v2:Remove condition current->vgpu==vgpu when shadow during ELSP
writing.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
To perform the workload scan and shadow in ELSP writing stage for
performance consideration, the workload scan and shadow stuffs
should be factored out from dispatch_workload().
v2:Put context pin before i915_add_request;
Refine the comments;
Rename some APIs;
v3:workload->status should set only when error happens.
v4:i915_add_request is must to have after i915_gem_request_alloc.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The I915_READ/WRITE is not only a mmio read/write, it also contains
debug checking and Forcewake domain lookup. This is too heavy for
GVT ring switch case which access batch of mmio registers on ring
switch. We can handle Forcewake manually and use the raw
i915_read/write instead. The benefit from this is 2x faster mmio
switch performance.
Before After
cycles ~550000 ~250000
v2: Use existing I915_READ_FW/I915_WRITE_FW macro. (zhenyu)
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
There are lots of POSTING_READ alongside each mmio write Op. While
actually this is not necessary. It just bring too much latency since
PCIe read Op is very slow which is of non-posted transaction.
For PCIe device, the mem transaction for strong ordering rules are:
o PCIe mmio write sequence is FIFO. Posted request cannot
pass previous posted request.
o PCIe mmio read will not go ahead of previous write.
Intel graphics doesn't support RO, so we can apply above rules. In
our case, we only need one POSTING_READ at last. This can remove
half of mmio read Op and then the average ring switch performance
is nearly doubled.
Before After
cycles ~970000 ~550000
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
It is better to use gvt_err when the gvt resource is not enough so
the user can be notified from the kernel dmesg. And this kind of
error message is gvt related.
Suggested-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Bing Niu <bing.niu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When linux guest access mmio with __raw_i915_read64 or __raw_i915_write64,
its length is 8 bytes.
This fix the linux guest in xengt couldn't boot up as it fail in
reading pv_info->magic.
Fixes: 65f9f6febf ("drm/i915/gvt: Optimize MMIO register handling for some large MMIO blocks")
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
MMIO block with tracked mmio, is introduced for the sake of performance
of searching tracked mmio. All the tracked mmio needs to get the initial
value from the HW state during vGPU being created. This patch is to
initialize the tracked registers in MMIO block with the HW state.
v2: Add "Fixes:" line for this patch (Zhenyu)
Fixes: 65f9f6febf ("drm/i915/gvt: Optimize MMIO register handling for some large MMIO blocks")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
If a workload caused a HW GPU hang or it is in the middle of
vGPU reset, the workload queue should be cleaned up to emulate
the hang state of the GPU.
v2:
- use ENGINE_MASK(ring_id) instead of (1 << ring_id). (Zhenyu)
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Use resetting_eng to identify which engine is resetting
so the rest ones' workload won't be impacted
v2:
- use ENGINE_MASK(ring_id) instead of (1 << ring_id). (Zhenyu)
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The pattern of a power well backing a set of fuses whose initialization
we need to wait for during power well enabling is common to all GEN9+
platforms. Adding support for this to the HSW power well enable helper
allows us to use the HSW/BDW power well code for GEN9+ as well in a
follow-up patch.
v2:
- Use an enum for power gates instead of raw numbers. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170711204236.5618-6-imre.deak@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Although on HSW/BDW there is only a single display global power well,
it's programmed the same way as other GEN9+ power wells. This also
means we can get at the HSW/BDW request and status flags the same way
it's done on GEN9+ by assigning the corresponding HSW/BDW power well ID.
This ID was assigned in a recent patch, so we can now switch to using
the same macros everywhere on HSW+.
Updating the HSW power well control register with RMW is not strictly
necessary, but this will allow us to use the same code for GEN9+.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1499352040-8819-13-git-send-email-imre.deak@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2nd round of 4.14 features:
- prep for deferred fbdev setup
- refactor fixed 16.16 computations and skl+ wm code (Mahesh Kumar)
- more cnl paches (Rodrigo, Imre et al)
- tighten context cleanup and handling (Chris Wilson)
- fix interlaced handling on skl+ (Mahesh Kumar)
- small bits as usual
* tag 'drm-intel-next-2017-07-17' of git://anongit.freedesktop.org/git/drm-intel: (84 commits)
drm/i915: Update DRIVER_DATE to 20170717
drm/i915: Protect against deferred fbdev setup
drm/i915/fbdev: Always forward hotplug events
drm/i915/skl+: unify cpp value in WM calculation
drm/i915/skl+: WM calculation don't require height
drm/i915: Addition wrapper for fixed16.16 operation
drm/i915: cleanup fixed-point wrappers naming
drm/i915: Always perform internal fixed16 division in 64 bits
drm/i915: take-out common clamping code of fixed16 wrappers
drm/i915/cnl: Add missing type case.
drm/i915/cnl: Add max allowed Cannonlake DC.
drm/i915: Make DP-MST connector info work
drm/i915/cnl: Get DDI clock based on PLLs.
drm/i915/cnl: Inherit RPS stuff from previous platforms.
drm/i915/cnl: Gen10 render context size.
drm/i915/cnl: Don't trust VBT's alternate pin for port D for now.
drm/i915: Fix the kernel panic when using aliasing ppgtt
drm/i915/cnl: Cannonlake color init.
drm/i915/cnl: Add force wake for gen10+.
x86/gpu: CNL uses the same GMS values as SKL
...
Once the Windows guest is shutdown, the display pipe will be disabled
and intel_gvt_check_vblank_emulation will be called to check if the
vblank timer is turned off. Given the scenario of creating VM1 ,VM2,
destoying VM2 in current code, VM1 has pipe enabled and continues to
check VM2, the flag have_enabled_pipe is always false since all the VM2
pipes are disabled, so the vblank timer will be canceled and TDR happens
in Windows VM1 guest due to the vsync timeout.
In this patch the vblank timer will be never canceled once one pipe is
enabled.
v2:
- remove have_enabled_pipe flag and check pipe enabled directly. (Zhenyu)
Cc: Wang Hongbo <hongbo.wang@intel.com>
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The req->fence.error will be set if this request caused GPU hang so
we can use this value to workload->status to indicate whether this
GVT request caused any problem. If it caused GPU hang, we shouldn't
trigger any context switch back to the guest.
v2:
- only take -EIO from fence->error. (Zhenyu)
Fixes: 8f1117abb4 (drm/i915/gvt: handle workload lifecycle properly)
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
For the vGPU workloads, now GVT-g use per vGPU scheduler, the per-ring
work_thread only pick workload belongs to the current vGPU. And with time
slice based scheduler, it waits all the engines become idle before do vGPU
switch. So we can run free dispatch in per-ring work_thread, different ring
running in different 'vGPU' won't happen.
For the workloads between vGPU and Host, this scheduler_mutex can't block
host to dispatch workload into other ring engines.
Here remove this mutex since it impacts the performance when applications
use more than 1 ring engines in 1 vgpu.
ring0 running in vGPU1, ring1 running in Host. Will happen.
ring0 running in vGPU1, ring1 running in vGPU2. Won't happen.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The command buffer address in context like ring buffer base address
and wa_ctx address need to be audit to make sure they are in the
valid GGTT range.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
It will causes memory leak, if the function setup_spt_oos() fail,
in the function intel_gvt_init_gtt(),
which allocated by get_zeroed_page() and mapped by dma_map_page().
Unmap and free the page, after STP oos initialize fail,
it will fix this issue.
Signed-off-by: Zhou, Wenjia <zhiyuan_zhu@htc.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Resync with the main drm-next pull request for 4.13. What we really
need is to fully resync with pending drm-misc, but that's not yet
possible due to the still ongoing merge window.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The dpy_reg_mmio_read_x functions directly copy 4 bytes data to the
target address with considering the length. If may cause the target
memory corrupted if the requested length less than 4 bytes. Fix it
for safety even we already have some checking to avoid this happen.
And for convince, the 3 functions are merged.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When host connects a crt screen, linux guest will detect two
screens: crt and dp. This is wrong as linux guest has only
one dp.
In order to avoid guest get host crt screen, we should set
ADPA_CRT_HOTPLUG_MONITOR to none. But MMIO_RO(PCH_ADPA) prevent
from that. So MMIO_DH should be used instead of MMIO_RO.
v2: Clear its staus to none at initialize, so guest don't
get host crt.(Zhangyu)
v3: SKL doesn't have this register, limit it to pre_skl.(xiong)
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
On BDW, when host physical screen and guest virtual screen aren't on
the same DDI port, guest i915 driver prints the following error and
stop running.
[ 6.775873] BUG: unable to handle kernel NULL pointer dereference
at 0000000000000068
[ 6.775928] IP: intel_ddi_clock_get+0x81/0x430 [i915]
[ 6.776206] Call Trace:
[ 6.776233] ? vgpu_read32+0x4f/0x100 [i915]
[ 6.776264] intel_ddi_get_config+0x11c/0x230 [i915]
[ 6.776298] intel_modeset_setup_hw_state+0x313/0xd40 [i915]
[ 6.776334] intel_modeset_init+0xe49/0x18d0 [i915]
[ 6.776368] ? vgpu_write32+0x53/0x100 [i915]
[ 6.776731] ? intel_i2c_reset+0x42/0x50 [i915]
[ 6.777085] ? intel_setup_gmbus+0x32a/0x350 [i915]
[ 6.777427] i915_driver_load+0xabc/0x14d0 [i915]
[ 6.777768] i915_pci_probe+0x4f/0x70 [i915]
The null pointer is guest intel_crtc_state->shared_dpll which is
setted in haswell_get_ddi_pll(). When guest and host screen are
on different DDI port, host driver won't set PORT_CLK_SET(guest_port),
so haswell_get_ddi_pll() will return null and don't set
pipe_config->shared_dpll, once the following program refernce this
structure, it will print the above error.
This patch set the initial val of guest PORT_CLK_SEL(guest_port) to
LCPLL_810. And guest i915 driver will reset this value according to
guest screen mode.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
There are two kinds of locking sequence.
One is in the thread which is started by vfio ioctl to do
the iommu unmapping. The locking sequence is:
down_read(&group_lock) ----> mutex_lock(&cached_lock)
The other is in the vfio release thread which will unpin all
the cached pages. The lock sequence is:
mutex_lock(&cached_lock) ---> down_read(&group_lock)
And, the cache_lock is used to protect the rb tree of the cache
node and doing vfio unpin doesn't require this lock. Move the
vfio unpin out of the cache_lock protected region.
v2:
- use for style instead of do{}while(1). (Zhenyu)
Fixes: f30437c5e7 ("drm/i915/gvt: add KVMGT support")
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
