The maxcpus= kernel boot parameter limits the number of CPUs brought
online at boot time, but it does nothing to prevent additional CPUs
from being brought up later. Placing a hard cap on the total number
of CPUs is instead the job of the nr_cpus= boot parameter. This commit
therefore switches the configfrag_boot_cpus() shell function from maxcpus=
to nr_cpus=. This commit also adds a nr_cpus=43 kernel parameter to RCU's
TREE01 test scenario, but retains the maxcpus=8 kernel parameter in order
to test the ability of RCU expedited grace periods to handle new CPUs
coming online for the first time during grace-period initialization.
Finally, this commit makes the torture scheduling allow maxcpus= to
override other means of specifying the number of CPUs to allow for.
This last works because the torture kernel modules size their workloads
based on the number of CPUs present at the start of the test, not the
ultimate number of CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, rcutorture groups runs in batches, building each scenario in
a given batch, then invoking qemu to run all the kernels in the batch.
Of course, if a given scenario's kernel fails to build, there is no qemu
run for that scenario. And if all of the kernels in a given batch fail
to build, there are no runs, and rcutorture immediately starts on the
next batch.
But not if --jitter has been specified, which it is by default. In this
case, the jitter scripts are started unconditionally, and rcutorture
waits for them to complete, even though there are no kernels to run.
This commit therefore checks for this situation, and refuses to start
jitter unless at least one of the kernels in the batch built successfully.
This saves substantial time when all scenarios' kernels fail to build,
particularly if a long --duration was specified.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, testing a variant of an existing scenario requires editing
that scenario's file or creating a new scenario file. This is messy
and error prone with respect to changes to scenarios.
This commit therefore adds a --kconfig argument to kvm.sh, so that
'--kconfig "CONFIG_RCU_TRACE=y CONFIG_RCU_EQS_DEBUG=n" will override those
two Kconfig options. In addition, there is now clear precedence:
the config fragment overrides CFcommon, and the --kconfig argument
overrides both.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, when running from a git archive, the testid.txt file contains
only the branch name, the output of "git status", and the SHA-1 of
the current HEAD. This is useful, but does not uniquely identify the
source code that was built. This commit therefore adds the output of
"git diff HEAD", which means that if two testid.txt files compare equal,
they correspond to exactly the same source code. Give or take the
possibility of SHA-1 collisions, that is. ;-)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, if the --jitter flag specifies jitter for a --build-only
run, the system will obediently build a kernel, refuse to launch it,
launch the requested number of jitter processes, and wait for the
specified kernel run time, which defaults to 30 minutes. This is
of course quite pointless.
This commit therefore disables jitter on build-only runs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit enables jitter by default. It may be manually disabled
by passing "--jitter 0" to kvm.sh.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a --jitter OS-jitter capability to expose bugs based
on no-delay assumptions.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit converts test duration from minutes to seconds early on
in order to prepare for upcoming OS-jitter-injection changes.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds the scripting changes to add support for the shiny
new rcuperf kernel module.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The default test grace period of two minutes is insufficient in some
cases and excessive in others. This commit therefore increases the
default to three minutes, but also adds a --shutdown-grace parameter
to allow the default to be overridden.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, the scripts print "----Start batch" at the beginning of each
batch, which does serve as a good visual delimiter between batches.
Unfortunately, if there are a lot of batches, it is hard to quickly
estimate test runtime from the output of "--dryrun sched". This commit
therefore adds a batch number, so that the beginning-of-batch output
looks like this "----Start batch 10" for the tenth batch.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit allows --bootarg instead of --bootargs, --config instead of
--configs, and --qemu-arg instead of --qemu-args. For those cases where
a native English speaker might auto-correct the argument to be incorrect.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Although it is currently possible to run the same test in parallel,
'--config "TINY01 TINY01 TINY01"' can get a bit verbose, especially
if you want to run 48 instances of TINY01 in parallel. This commit
therefore allows prefixing the Kconfig fragment with a repeat count,
for example, '--config "48*TINY01"' to run 48 instances in parallel.
At least assuming that you have 48 CPUs and also gave '--cpus 48'.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Now that we have removed configs based on kernel version, we can also remove the
kversion parameter in kvm.sh.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Setting CONFIG_MAXSMP=y causes cpumasks to be moved offstack, which
introduces the possibility of NULL cpumask_var_t pointers. This commit
therefore enables CONFIG_MAXSMP=y in TREE01 to increase test coverage.
However, because CONFIG_MAXSMP=y implies 8192 CPUs, we need to use
the maxcpus= boot parameter to limit the number of CPUs to something
reasonable, which in turn requires updating the scripts to handle this.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This commit sets the executable bit on test scripts config2frag.sh
and kvm.sh. Since #!/bin/bash is set in all the scripts, this commit
also drops it from all usage lines because the scripts can now all be
invoked directly.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Some of the scripts encode a default /bin/sh shell. On systems which use
dash as default shell, these scripts fail as they are bash scripts. I
encountered this while testing the sprintf() changes on a Debian system
where dash is the default shell.
This commit changes all such uses to use bash explicitly.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently the post-processing complains about the lack of rcutorture
output when --buildonly is set and also emits misleading messages about
kernels being started and finishing. This commit suppresses these
complaints and messages.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current scripting only keeps track of the git SHA-1 of the current
HEAD. This can cause confusion in cases where testing ran in a git
tree where changes had not yet been checked in. This commit therefore
also records the output of "git diff HEAD" to provide the information
needed to reconstruct the source tree that was tested.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, the scripts hard-code arch/x86/boot/bzImage, which does not
work well for other architectures. This commit therefore provides a
identify_boot_image function that selects the correct bzImage location
relative to the top of the Linux source tree. This commit also adds a
--bootimage argument that allows selecting some other file, for example,
"vmlinux".
This change requires that the definition of the QEMU variable be
computed earlier in order to identify where to look for the boot image
when it comes time to copy it to the results directory.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit applies quotes to permit multi-word --qemu-args and
--bootargs arguments.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
In a normal torture-test run, the script inherits its environment
variables, but this does not work when producing a script that is
to run later. Therefore, definitions and exports are prepended to
a dryrun script but not to a script that is run immediately. This
commit reconciles this by placing definitions and exports at the
beginning of the script in both cases.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Conflicts:
tools/testing/selftests/rcutorture/bin/kvm.sh
The scripts produced by kvm.sh's "--dryrun script" argument were intended
for debugging rather than to run, but it is easier to debug if the script
output matches exactly what is run. This commit therefore makes this
script runnable.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit makes the torture scripts a bit more RCU-independent.
It also removes a redundant export of this same shell variable.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit makes the torture scripts a bit more RCU-independent.
It also drops an redundant "export" statement.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit makes the torture scripts a bit more RCU-independent by
changing RCU_BUILDONLY to TORTURE_BUILDONLY. It also removes an
unnecessary export command.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit makes the torture scripts a bit more RCU-independent by
changing RCU_KMAKE_ARG to TORTURE_KMAKE_ARG. It also removes the
unnecessary export command.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Some environments require some variation on "make defconfig" to initialize
the .config file. This commit therefore adds a --defconfig argument to
allow this to be specified. The default value is of course "defconfig".
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit makes the output of "--dryrun sched" more user-friendly,
clearly indicating the batch starts.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The --builddir and --relbuilddir options were initially intended to handle
parallel tests. However, since commit 43e38ab3d5 (Enable concurrent
rcutorture runs), the script manages multiple build directories as
needed for parallel testing. This commit therefore removes these two
obsolete options.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit logs the progress text that kvm.sh outputs, improving
after-the-fact troubleshooting.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The output of each kvm-test-1-run.sh script is placed into a file
whose name parallels that of the build directory. This means that
the kvm-test-1-run.sh output is overwritten by later run. This
commit therefore places the kvm-test-1-run.sh output into the
per-test-case directory in the "res" hierarchy.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit uses the standard software ploy of introducing another
level of indirection below the configs directory. This allows each
torture-test suite to have its own set of Kconfig files, boot parameters,
and version-specific scripts. Initially, we have only rcu, but lock
will follow soonish.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The kvm-test-1-rcu.sh is not specific to RCU, so this commit renames it
to kvm-test-1-run.sh.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit prevents the results directory from being created for
dryruns. However, a script generated from a dryrun will create
the results directory should it be run.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org
This commit adds a "(!)" flag after the number of CPUs required by a
given test if that test requires more than the available number of CPUs.
Note that these flags appear only when the number of CPUs is specified
using the --cpus argument. In the absence of a --cpus argument, no
tests are flagged.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Running the standard set of rcutorture tests on 24 CPUs results in
the following sub-optimal schedule:
----start batch----
TREE07 16
----start batch----
TREE08 16
SRCU-P 8
----start batch----
TREE01 8
TREE02 8
TREE03 8
----start batch----
TREE04 8
TREE05 8
TREE06 8
----start batch----
SRCU-N 4
TINY01 1
TINY02 1
TREE09 1
If one of the eight-CPU runs were to be moved into the first batch,
the test suite would complete in four batches rather than five.
This commit therefore uses a greedy algorithm to re-order the test
entries so that the sequential batching will produce an optimal schedule
in this case:
----start batch----
TREE07 16
SRCU-P 8
----start batch----
TREE08 16
TREE01 8
----start batch----
TREE02 8
TREE03 8
TREE04 8
----start batch----
TREE05 8
TREE06 8
SRCU-N 4
TINY01 1
TINY02 1
TREE09 1
Please note that this is still not an optimal bin-packing algorithm,
however, it does produce optimal solutions for most common scenarios.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit fixes handling numbering of multiple runs of the same test
so as to disambiguate output.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Actual rcutorture tests take considerable time and machine resources,
so it is inconvenient to actually do an rcutorture run when optimizing
the bin-packing algorithm. This commit therefore adds a --dryrun
argument, which defaults to doing a run, but for which "sched"
says to simply print the run schedule and "script" dumps the script
without running it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcutorture tests run by default range from using one CPU to using
sixteen of them. Therefore, rcutorture testing could be sped up
significantly simply by running the kernels in parallel. Building
them in parallel is not all that helpful: "make -j" is usually a
better bet. So this commit takes a new "--cpus" argument that
specifies how many CPUs rcutorture is permitted to use for its
parallel runs. The default of zero does sequential runs as before.
The bin-packing is minimal, and will be grossly suboptimal for
some configurations. However, powers of two work reasonably well.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, most qemu flags are calculated in kvm-test-1-rcu.sh,
except that -nographics is set up by kvm.sh. This commit promotes
one-stop shopping by consolidating the determination of qemu flags into
kvm-test-1-rcu.sh.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
