drm_plane_helper_check_state() is supposed to do things the atomic way,
so it should not be inspecting crtc->enabled. Rather we should be
looking at crtc_state->enable.
We have a slight complication due to drm_plane_helper_check_update()
reusing drm_plane_helper_check_state() for non-atomic drivers. Thus
we'll have to pass the crtc_state in manally and construct a fake
crtc_state in drm_plane_helper_check_update().
v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101201558.6059-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch replace instances of dev_info/err/debug with
DRM_DEV_INFO/ERROR/WARN respectively inorder to use a drm-formatted
specific log messages. Issue corrected with the help of the following
Coccinelle script:
@r@
@@
(
-dev_info
+DRM_DEV_INFO
|
-dev_err
+DRM_DEV_ERROR
|
-dev_dbg
+DRM_DEV_DEBUG
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170915083603.GA18992@Haneen
Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.
Generated by: scripts/coccinelle/api/drm-get-put.cocci
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1502454794-28558-21-git-send-email-cakturk@gmail.com
Iommu would get page fault with following path:
vop_disable:
1, disable all windows and set vop config done
2, vop enter to standy, all windows not works, but their registers
are not clean, when you read window's enable bit, may found the
window is enable.
vop_enable:
1, memcpy(vop->regsbak, vop->regs, len)
save current vop registers to vop->regsbak, then you can found
window is enable on regsbak.
2, VOP_WIN_SET(vop, win, gate, 1);
force enable window gate, but gate and enable are on same
hardware register, then window enable bit rewrite to vop hardware.
3, vop power on, and vop might try to scan destroyed buffer,
then iommu get page fault.
Move windows disable after vop regsbak restore, then vop regsbak mechanism
would keep tracing the modify, everything would be safe.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494582-6934-1-git-send-email-mark.yao@rock-chips.com
This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.
This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.
v2: A minor addition from Daniel
v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)
v4: Minor comment adjustments (Liviu)
v5: Some new platforms added due to rebase
v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Force vop output mode on encoder driver seem not a good idea,
EDP, HDMI, DisplayPort all have 10bit input on rk3399,
On non-10bit vop, vop 8bit output bit[0-7] connect to the
encoder high 8bit [2-9].
So force RGB10 to RGB888 on vop driver would be better.
And another problem, EDP check crtc id on atomic_check,
but encoder maybe NULL, so out_mode configure would fail,
it cause edp no display.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1495885416-22216-1-git-send-email-mark.yao@rock-chips.com
We're trying to access vop registers here, so need to make sure
the pm domain is on.
Normally it should be enabled by the bootloader, but there's no
guarantee of it. And if we wanna do unbind/bind, it would also
cause the device to hang.
And this patch also does these:
1/ move vop_initial to the end of vop_bind for eaiser error handling.
2/ correct the err_put_pm_runtime of vop_enable.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-8-git-send-email-jeffy.chen@rock-chips.com
Backmerge the main pull request to sync up with all the newly landed
drivers. Otherwise we'll have chaos even before 4.12 started in
earnest.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Add support for cdn DP controller which is embedded in the rk3399
SoCs. The DP is compliant with DisplayPort Specification,
Version 1.3, This IP is compatible with the rockchip type-c PHY IP.
There is a uCPU in DP controller, it need a firmware to work,
please put the firmware file to /lib/firmware/rockchip/dptx.bin. The
uCPU in charge of aux communication and link training, the host use
mailbox to communicate with the ucpu.
The dclk pin_pol of vop must not be invert for DP.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
[seanpaul fixed up some races between the worker and modeset]
[seanpaul squashed ~15 commits from chromium.org gerrit]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[groeck fixed compilation errors when building as module]
Signed-off-by: Guenter Roeck <groeck@chromium.org>
The setting of vop registers need a reg_done writing to take effect.
In vop_enable the vop return to work by by restoring registers, but the
registers do not take effect immediately, it should a vop_cfg_done
after it. The same thing is needed by windows_disabled in
vop_crtc_disable.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
If create_crtc fails in vop bind, ensure the irq refcount is zeroed
back out before exiting.
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
After changes introduced by last patches, there is no useful data stored
in vop_plane_state struct. Let's remove it and make the driver use
generic plane state alone.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
This patch makes the driver send the pending vblank event in next vblank
following the commit, relying on vblank signalling improvements done in
previous patches. This gives us vblank events that always represent the
real moment of changes hitting on the screen (which was the case only
for complete FB changes before) and lets us remove the manual window
update check.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Originally we needed to enable vblank for any atomic commit to kick the
PSR machine, but that was changed and we no longer need to do so from
a vblank interrupt. Let's return to original behavior of enabling
vblank only if it is really necessary.
This essentially reverts commit 5b6804034a ("drm/rockchip: Enable
vblank without event").
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Currently the driver uses a custom function to wait for flip to complete
after an atomic commit. It was needed before because of two problems:
- there is no hardware vblank counter, so the original helper would
have a race condition with the vblank interrupt,
- the driver didn't support unreferencing cursor framebuffers
asynchronously to the commit, which was what the helper expected.
Since both problems have been solved by previous patches, we can now
make the driver use the generic helper and remove custom waiting code.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Currently the driver waits for vblank and then unreferences old
framebuffers from atomic commit code path. This is however breaking the
legacy cursor API, which requires the updates to be fully asynchronous.
Instead of just adding a special case for cursor, we can have actually
smaller amount of code to unreference any changed framebuffer from a
flip work.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Since VOP does not have a hardware vblank count register, the ongoing
commit might be racing with a requested vblank interrupt, which would
increment the software vblank counter before the changes being committed
actually happen.
To avoid this, we can extend .atomic_flush(), so after it sets cfg_done
bit, it polls the vblank interrupt bit until it's inactive to make sure
that any old vblank interrupt gets to the handler and then uses
synchronize_irq(vop->irq) to make sure the handler finishes running.
The polling case should happen very rarely, but even if, the total wait
time should be relatively low and in practice almost equal to the vop
hardirq handler running time.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Current code implements prepare_fb and cleanup_fb callbacks only to
grab/release fb references, which is already done by atomic framework
when creating/destryoing plane state. Let's remove these
unused bits.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
The enable register only masks the raw status bits to signal CPU
interrupt only for enabled interrupts. The status bits are activated
regardless of the enable register. This means that we might have an old
interrupt event queued, which we are not interested in. To avoid getting
a spurious interrupt signalled, we have to clear the old bit before we
update the enable register.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Instead of keying off vblank for psr, just flush every time
we get an atomic update. This ensures that cursor updates
will properly disable psr (without turning vblank on/off),
and unifies the paths between fb_dirty and atomic psr
enable/disable.
Reviewed-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
This pull request contains the following rockchip drm changes:
- Introduce support for rk3399 vop/crtc
- Add PSR framework to the rockchip driver
- Implement PSR in the rockchip analogix edp driver
- Fix panel on/off in analogix to avoid damaging panels
- Some miscellaneous fixes to clean up logs and code readability
* 'for-next' of git://people.freedesktop.org/~seanpaul/dogwood:
drm/rockchip: analogix_dp: drop unnecessary probe deferral "error" print
drm/rockchip: Enable vblank without event
drm/rockchip: Improve analogix-dp psr handling
drm/rockchip: A couple small fixes to psr
drm/rockchip: Use a spinlock to protect psr state
drm/rockchip: Don't use a delayed worker for psr state changes
drm/rockchip: Convert psr_list_mutex to spinlock and use it
drm/rockchip: analogix_dp: implement PSR function
drm/bridge: analogix_dp: add the PSR function support
drm/rockchip: add an common abstracted PSR driver
drm/rockchip: vop: export line flag function
drm/bridge: analogix_dp: Ensure the panel is properly prepared/unprepared
dt-bindings: add compatible strings for big/little rockchip vops
dt-bindings: sort Rockchip vop compatible by chip's number
drm/rockchip: vop: add rk3399 vop support
drm/rockchip: vop: introduce VOP_REG_MASK
drm/rockchip: sort registers define by chip's number
vblank should be enabled regardless of whether an event
is expected back. This is especially important for a cursor
plane.
Reviewed-by: Yakir Yang <ykk@rock-chips.com>
Tested-by: Yakir Yang <ykk@rock-chip.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
The PSR driver have exported four symbols for specific device driver, and
it's safe to call them in interrupt context:
- rockchip_drm_psr_register()
- rockchip_drm_psr_unregister()
- rockchip_drm_psr_enable()
- rockchip_drm_psr_disable()
- rockchip_drm_psr_flush()
Encoder driver should call the register/unregister interfaces to hook
itself into common PSR driver, encoder have implement the 'psr_set'
callback which use the set PSR state in hardware side.
Crtc driver would call the enable/disable interfaces when vblank is
enable/disable, after that the common PSR driver would call the encoder
registered callback to set the PSR state.
Fb driver would call the flush interface in 'fb->dirty' callback, this
helper function would force all PSR enabled encoders to exit from PSR
for 3 seconds.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
[seanpaul removed leftover psr_enabled/psr_work kruft from drm_vop.c]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
VOP have integrated a hardware counter which indicate the exact display
line that vop is scanning. And if we're interested in a specific line,
we can set the line number to vop line_flag register, and then vop would
generate a line_flag interrupt for it.
For example eDP PSR function is interested in the vertical blanking
period, then driver could set the line number to zero.
This patch have exported a symbol that allow other driver to listen the
line flag event with given timeout limit:
- rockchip_drm_wait_line_flag()
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
There are two VOP in rk3399 chip, respectively VOP_BIG and VOP_LIT.
most registers layout of this two vop is same, their framework are both
VOP_FULL, the Major differences of this two is that:
VOP_BIG max output resolution is 4096x2160.
VOP_LIT max output resolution is 2560x1600
VOP_BIG support four windows.
VOP_LIT only support two windows.
RK3399 vop register layout is similar with rk3288, so some feature
can reuse with rk3288.
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Some new vop register support mask, bit[16-31] is mask,
bit[0-15] is value, the mask is correspond to the value.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
[seanpaul masked 'v' per tfiga's review comments]
Reviewed-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
