As the DMA controller on Sophgo CV1800 series SoC only has 8 channels,
the SoC provides a dma multiplexer to reuse the DMA channel. However,
the dma multiplexer also controls the DMA interrupt multiplexer, which
means that the dma multiplexer needs to know the channel number.
Allow the driver to use DMA phandle args as the channel number, so the
DMA multiplexer can route the DMA interrupt correctly.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260120013706.436742-3-inochiama@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
I have a use case where nr_buffers = 3 and in which each descriptor is composed by 3
segments, resulting in the DMA channel descs_allocated to be 9. Since axi_desc_put()
handles the hw_desc considering the descs_allocated, this scenario would result in a
kernel panic (hw_desc array will be overrun).
To fix this, the proposal is to add a new member to the axi_dma_desc structure,
where we keep the number of allocated hw_descs (axi_desc_alloc()) and use it in
axi_desc_put() to handle the hw_desc array correctly.
Additionally I propose to remove the axi_chan_start_first_queued() call after completing
the transfer, since it was identified that unbalance can occur (started descriptors can
be interrupted and transfer ignored due to DMA channel not being enabled).
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Link: https://lore.kernel.org/r/1711536564-12919-1-git-send-email-jpinto@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Added support for DMA controller with more than 8 channels.
DMAC register map changes based on number of channels.
Enabling DMAC channel:
DMAC_CHENREG has to be used when number of channels <= 8
DMAC_CHENREG2 has to be used when number of channels > 8
Configuring DMA channel:
CHx_CFG has to be used when number of channels <= 8
CHx_CFG2 has to be used when number of channels > 8
Suspending and resuming channel:
DMAC_CHENREG has to be used when number of channels <= 8 DMAC_CHSUSPREG
has to be used for suspending a channel > 8
Signed-off-by: Pandith N <pandith.n@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211001140812.24977-2-pandith.n@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Removed free slot check algorithm in dw_axi_dma_set_hw_channel. For 8
DMA channels, use respective handshake slot in DMA_HS_SEL APB register.
For every channel, an dedicated slot is provided in hardware handshake
register AXIDMA_CTRL_DMA_HS_SEL_n. Peripheral source number is
programmed in respective channel slots.
Signed-off-by: Pandith N <pandith.n@intel.com>
Tested-by: Pan Kris <kris.pan@intel.com>
Link: https://lore.kernel.org/r/20210802055454.15192-2-pandith.n@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
AxiDMA driver exposed the dma_set_max_seg_size() to the DMAENGINE.
It shall helps the DMA clients to create size-optimized linked-list
for the controller.
However, there are certain situations where DMA client might not be
abled to benefit from the dma_get_max_seg_size() if the segment size
can't meet the nature of the DMA client's operation.
In the case of ALSA operation, ALSA application and driver expecting
to run in a period of larger than 10ms regardless of the bit depth.
With this large period, there is a strong request to split the linked-list
in the AxiDMA driver.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-18-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for DMA_RESIDUE_GRANULARITY_BURST so that AxiDMA can report
DMA residue.
Existing AxiDMA driver only support data transfer between
memory to memory operation, therefore reporting DMA residue
to the DMA clients is not supported.
Reporting DMA residue to the DMA clients is important as DMA clients
shall invoke dmaengine_tx_status() to understand the number of bytes
been transferred so that the buffer pointer can be updated accordingly.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-10-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for of_dma_controller_register() so that DMA clients
can pass in device handshake number to the AxiDMA driver.
DMA clients shall code the device handshake number in the Device tree.
When DMA activities are needed, DMA clients shall invoke OF helper
function to pass in the device handshake number to the AxiDMA.
Without register to the of_dma_controller_register(), data transfer
between memory to device and device to memory operations would failed.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-9-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Simplify and refactor the descriptor management by removing the redundant
Linked List Item (LLI) queue control logic from the AxiDMA driver.
The descriptor is split into virtual descriptor and hardware LLI so that
only hardware LLI memories are allocated from the DMA memory pool.
Up to 64 descriptors can be allocated within a PAGE_SIZE compare to 16
descriptors in previous version. This solves the problem where an
ALSA driver expects more than 16 DMA descriptors to run.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-3-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch adds support for the DW AXI DMAC controller.
DW AXI DMAC is a part of HSDK development board from Synopsys.
In this driver implementation only DMA_MEMCPY transfers are
supported.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
