null_blk has some rather odd capping of the max_hw_sectors value to
BLK_DEF_MAX_SECTORS, which doesn't make sense - max_hw_sector is the
hardware limit, and BLK_DEF_MAX_SECTORS despite the confusing name is the
default cap for the max_sectors field used for normal file system I/O.
Remove all the capping, and simply leave it to the block layer or
user to take up or not all of that for file system I/O.
Fixes: ea17fd354c ("null_blk: Allow controlling max_hw_sectors limit")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231227092305.279567-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When zones were first added the SCSI and ATA specs, two different
models were supported (in addition to the drive managed one that
is invisible to the host):
- host managed where non-conventional zones there is strict requirement
to write at the write pointer, or else an error is returned
- host aware where a write point is maintained if writes always happen
at it, otherwise it is left in an under-defined state and the
sequential write preferred zones behave like conventional zones
(probably very badly performing ones, though)
Not surprisingly this lukewarm model didn't prove to be very useful and
was finally removed from the ZBC and SBC specs (NVMe never implemented
it). Due to to the easily disappearing write pointer host software
could never rely on the write pointer to actually be useful for say
recovery.
Fortunately only a few HDD prototypes shipped using this model which
never made it to mass production. Drop the support before it is too
late. Note that any such host aware prototype HDD can still be used
with Linux as we'll now treat it as a conventional HDD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231217165359.604246-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
virtblk_revalidate_zones is called unconditionally from
virtblk_config_changed_work from the virtio config_changed callback.
virtblk_revalidate_zones is a bit odd in that it re-clears the zoned
state for host aware or non-zoned devices, which isn't needed unless the
zoned mode changed - but a zone mode change to a host managed model isn't
handled at all, and virtio_blk also doesn't handle any other config
change except for a capacity change is handled (and even if it was
the upper layers above virtio_blk wouldn't handle it very well).
But even the useful case of a size change that would add or remove
zones isn't handled properly as blk_revalidate_disk_zones expects the
device capacity to cover all zones, but the capacity is only updated
after virtblk_revalidate_zones.
As this code appears to be entirely untested and is getting in the way
remove it for now, but it can be readded in a fixed version with
proper test coverage if needed.
Fixes: 95bfec41bd ("virtio-blk: add support for zoned block devices")
Fixes: f1ba4e674f ("virtio-blk: fix to match virtio spec")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231217165359.604246-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move reading and checking the zoned model from virtblk_probe_zoned_device
into the caller, leaving only the code to perform the actual setup for
host managed zoned devices in virtblk_probe_zoned_device.
This allows to share the model reading and sharing between builds with
and without CONFIG_BLK_DEV_ZONED, and improve it for the
!CONFIG_BLK_DEV_ZONED case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231217165359.604246-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since "dev_search_path" can technically be as large as PATH_MAX,
there was a risk of truncation when copying it and a second string
into "full_path" since it was also PATH_MAX sized. The W=1 builds were
reporting this warning:
drivers/block/rnbd/rnbd-srv.c: In function 'process_msg_open.isra':
drivers/block/rnbd/rnbd-srv.c:616:51: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size between 0 and 4095 [-Wformat-truncation=]
616 | snprintf(full_path, PATH_MAX, "%s/%s",
| ^~
In function 'rnbd_srv_get_full_path',
inlined from 'process_msg_open.isra' at drivers/block/rnbd/rnbd-srv.c:721:14: drivers/block/rnbd/rnbd-srv.c:616:17: note: 'snprintf' output between 2 and 4351 bytes into a destination of size 4096
616 | snprintf(full_path, PATH_MAX, "%s/%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
617 | dev_search_path, dev_name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
To fix this, unconditionally check for truncation (as was already done
for the case where "%SESSNAME%" was present).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312100355.lHoJPgKy-lkp@intel.com/
Cc: Md. Haris Iqbal <haris.iqbal@ionos.com>
Cc: Jack Wang <jinpu.wang@ionos.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <linux-block@vger.kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20231212214738.work.169-kees@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a socket is processing ioctl 'NBD_SET_SOCK', config->socks might be
krealloc in nbd_add_socket(), and a garbage request is received now, a UAF
may occurs.
T1
nbd_ioctl
__nbd_ioctl
nbd_add_socket
blk_mq_freeze_queue
T2
recv_work
nbd_read_reply
sock_xmit
krealloc config->socks
def config->socks
Pass nbd_sock to nbd_read_reply(). And introduce a new function
sock_xmit_recv(), which differs from sock_xmit only in the way it get
socket.
==================================================================
BUG: KASAN: use-after-free in sock_xmit+0x525/0x550
Read of size 8 at addr ffff8880188ec428 by task kworker/u12:1/18779
Workqueue: knbd4-recv recv_work
Call Trace:
__dump_stack
dump_stack+0xbe/0xfd
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
sock_xmit+0x525/0x550
nbd_read_reply+0xfe/0x2c0
recv_work+0x1c2/0x750
process_one_work+0x6b6/0xf10
worker_thread+0xdd/0xd80
kthread+0x30a/0x410
ret_from_fork+0x22/0x30
Allocated by task 18784:
kasan_save_stack+0x1b/0x40
kasan_set_track
set_alloc_info
__kasan_kmalloc
__kasan_kmalloc.constprop.0+0xf0/0x130
slab_post_alloc_hook
slab_alloc_node
slab_alloc
__kmalloc_track_caller+0x157/0x550
__do_krealloc
krealloc+0x37/0xb0
nbd_add_socket
+0x2d3/0x880
__nbd_ioctl
nbd_ioctl+0x584/0x8e0
__blkdev_driver_ioctl
blkdev_ioctl+0x2a0/0x6e0
block_ioctl+0xee/0x130
vfs_ioctl
__do_sys_ioctl
__se_sys_ioctl+0x138/0x190
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Freed by task 18784:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x40
__kasan_slab_free.part.0+0x13f/0x1b0
slab_free_hook
slab_free_freelist_hook
slab_free
kfree+0xcb/0x6c0
krealloc+0x56/0xb0
nbd_add_socket+0x2d3/0x880
__nbd_ioctl
nbd_ioctl+0x584/0x8e0
__blkdev_driver_ioctl
blkdev_ioctl+0x2a0/0x6e0
block_ioctl+0xee/0x130
vfs_ioctl
__do_sys_ioctl
__se_sys_ioctl+0x138/0x190
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230911023308.3467802-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is enabled, null_queue_rq()
would return BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE for the request,
which has been marked as MQ_RQ_IN_FLIGHT by blk_mq_start_request().
Then null_queue_rqs() put these requests in the rqlist, return back to
the block layer core, which would try to queue them individually again,
so the warning in blk_mq_start_request() triggered.
Fix it by splitting the null_queue_rq() into two parts: the first is the
preparation of request, the second is the handling of request. We put
the blk_mq_start_request() after the preparation part, which may fail
and return back to the block layer core.
The throttling also belongs to the preparation part, so move it before
blk_mq_start_request(). And change the return type of null_handle_cmd()
to void, since it always return BLK_STS_OK now.
Reported-by: <syzbot+fcc47ba2476570cbbeb0@syzkaller.appspotmail.com>
Closes: https://lore.kernel.org/all/0000000000000e6aac06098aee0c@google.com/
Fixes: d78bfa1346 ("block/null_blk: add queue_rqs() support")
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20231120032521.1012037-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Memory reordering may occur in nbd_genl_connect(), causing config_refs
to be set to 1 while nbd->config is still empty. Opening nbd at this
time will cause null-ptr-dereference.
T1 T2
nbd_open
nbd_get_config_unlocked
nbd_genl_connect
nbd_alloc_and_init_config
//memory reordered
refcount_set(&nbd->config_refs, 1) // 2
nbd->config
->null point
nbd->config = config // 1
Fix it by adding smp barrier to guarantee the execution sequence.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-4-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 4af5f2e030 ("nbd: use blk_mq_alloc_disk and
blk_cleanup_disk") cleans up disk by blk_cleanup_disk() and it won't set
disk->private_data as NULL as before. UAF may be triggered in nbd_open()
if someone tries to open nbd device right after nbd_put() since nbd has
been free in nbd_dev_remove().
Fix this by implementing ->free_disk and free private data in it.
Fixes: 4af5f2e030 ("nbd: use blk_mq_alloc_disk and blk_cleanup_disk")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231107103435.2074904-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull virtio updates from Michael Tsirkin:
"vhost,virtio,vdpa: features, fixes, cleanups.
vdpa/mlx5:
- VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
- new maintainer
vdpa:
- support for vq descriptor mappings
- decouple reset of iotlb mapping from device reset
and fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
vdpa_sim: implement .reset_map support
vdpa/mlx5: implement .reset_map driver op
vhost-vdpa: clean iotlb map during reset for older userspace
vdpa: introduce .compat_reset operation callback
vhost-vdpa: introduce IOTLB_PERSIST backend feature bit
vhost-vdpa: reset vendor specific mapping to initial state in .release
vdpa: introduce .reset_map operation callback
virtio_pci: add check for common cfg size
virtio-blk: fix implicit overflow on virtio_max_dma_size
virtio_pci: add build offset check for the new common cfg items
virtio: add definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit
vduse: make vduse_class constant
vhost-scsi: Spelling s/preceeding/preceding/g
virtio: kdoc for struct virtio_pci_modern_device
vdpa: Update sysfs ABI documentation
MAINTAINERS: Add myself as mlx5_vdpa driver
virtio-balloon: correct the comment of virtballoon_migratepage()
mlx5_vdpa: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
vdpa/mlx5: Update cvq iotlb mapping on ASID change
vdpa/mlx5: Make iotlb helper functions more generic
...
Pull block updates from Jens Axboe:
- Improvements to the queue_rqs() support, and adding null_blk support
for that as well (Chengming)
- Series improving badblocks support (Coly)
- Key store support for sed-opal (Greg)
- IBM partition string handling improvements (Jan)
- Make number of ublk devices supported configurable (Mike)
- Cancelation improvements for ublk (Ming)
- MD pull requests via Song:
- Handle timeout in md-cluster, by Denis Plotnikov
- Cleanup pers->prepare_suspend, by Yu Kuai
- Rewrite mddev_suspend(), by Yu Kuai
- Simplify md_seq_ops, by Yu Kuai
- Reduce unnecessary locking array_state_store(), by Mariusz
Tkaczyk
- Make rdev add/remove independent from daemon thread, by Yu Kuai
- Refactor code around quiesce() and mddev_suspend(), by Yu Kuai
- NVMe pull request via Keith:
- nvme-auth updates (Mark)
- nvme-tcp tls (Hannes)
- nvme-fc annotaions (Kees)
- Misc cleanups and improvements (Jiapeng, Joel)
* tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linux: (95 commits)
block: ublk_drv: Remove unused function
md: cleanup pers->prepare_suspend()
nvme-auth: allow mixing of secret and hash lengths
nvme-auth: use transformed key size to create resp
nvme-auth: alloc nvme_dhchap_key as single buffer
nvmet-tcp: use 'spin_lock_bh' for state_lock()
powerpc/pseries: PLPKS SED Opal keystore support
block: sed-opal: keystore access for SED Opal keys
block:sed-opal: SED Opal keystore
ublk: simplify aborting request
ublk: replace monitor with cancelable uring_cmd
ublk: quiesce request queue when aborting queue
ublk: rename mm_lock as lock
ublk: move ublk_cancel_dev() out of ub->mutex
ublk: make sure io cmd handled in submitter task context
ublk: don't get ublk device reference in ublk_abort_queue()
ublk: Make ublks_max configurable
ublk: Limit dev_id/ub_number values
md-cluster: check for timeout while a new disk adding
nvme: rework NVME_AUTH Kconfig selection
...
The following codes have an implicit conversion from size_t to u32:
(u32)max_size = (size_t)virtio_max_dma_size(vdev);
This may lead overflow, Ex (size_t)4G -> (u32)0. Once
virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX
instead.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230904061045.510460-1-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
disk_check_media_change is mostly called from ->open where it makes
little sense to mark the file system on the device as dead, as we
are just opening it. So instead of calling bdev_mark_dead from
disk_check_media_change move it into the few callers that are not
in an open instance. This avoid calling into bdev_mark_dead and
thus taking s_umount with open_mutex held.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-4-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Now ublk_abort_queue() is run exclusively with ublk_queue_rq() and the
ubq_daemon task, so simplify aborting request:
- set UBLK_IO_FLAG_ABORTED in ublk_abort_queue() just for aborting
this request
- abort request in ublk_queue_rq() if ubq->canceling is set
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231009093324.957829-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Monitor work actually introduces one extra context for handling abort, this
way is easy to cause race, and also introduce extra delay when handling
aborting.
Now we start to support cancelable uring_cmd, so use it instead:
1) this cancel callback is either run from the uring cmd submission task
context or called after the io_uring context is exit, so the callback is
run exclusively with ublk_ch_uring_cmd() and __ublk_rq_task_work().
2) the previous patch freezes request queue when calling ublk_abort_queue(),
which is now completely exclusive with ublk_queue_rq() and
ublk_ch_uring_cmd()/__ublk_rq_task_work().
3) in timeout handler, if all IOs are in-flight, then all uring commands
are completed, uring command canceling can't help us to provide forward
progress any more, so call ublk_abort_requests() in timeout handler.
This way simplifies aborting queue, and is helpful for adding new feature,
such as, relax the limit of using single task for handling one queue.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231009093324.957829-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
So far aborting queue ends request when the ubq daemon is exiting, and
it can be run concurrently with ublk_queue_rq(), this way is fragile and
we depend on the tricky usage of UBLK_IO_FLAG_ABORTED for avoiding such
race.
Quiesce queue when aborting queue, and the two code paths can be run
completely exclusively, then it becomes easier to add new ublk feature,
such as relaxing single same task limit for each queue.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231009093324.957829-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_cancel_dev() just calls ublk_cancel_queue() to cancel all pending
io commands after ublk request queue is idle. The only protection is just
the read & write of ubq->nr_io_ready and avoid duplicated command cancel,
so add one per-queue lock with cancel flag for providing this protection,
meantime move ublk_cancel_dev() out of ub->mutex.
Then we needn't to call io_uring_cmd_complete_in_task() to cancel
pending command. And the same cancel logic will be re-used for
cancelable uring command.
This patch basically reverts commit ac5902f84b ("ublk: fix AB-BA lockdep warning").
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231009093324.957829-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In well-done ublk server implementation, ublk io command won't be
linked into any link chain. Meantime they are always handled in no-wait
style, so basically io cmd is always handled in submitter task context.
However, the server may set IOSQE_ASYNC, or io command is linked to one
chain mistakenly, then we may still run into io-wq context and
ctx->uring_lock isn't held.
So in case of IO_URING_F_UNLOCKED, schedule this command by
io_uring_cmd_complete_in_task to force running it in submitter task. Then
ublk_ch_uring_cmd_local() is guaranteed to run with context uring_lock held,
and we needn't to worry about sync among submission code path any more.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231009093324.957829-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The dev_id/ub_number is used for the ublk dev's char device's minor
number so it has to fit into MINORMASK. This patch adds checks to prevent
userspace from passing a number that's too large and limits what can be
allocated by the ublk_index_idr for the case where userspace has the
kernel allocate the dev_id/ub_number.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231012150600.6198-2-michael.christie@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block fixes from Jens Axboe:
"Just two minor fixes, for nbd and md"
* tag 'block-6.6-2023-10-06' of git://git.kernel.dk/linux:
nbd: don't call blk_mark_disk_dead nbd_clear_sock_ioctl
md/raid5: release batch_last before waiting for another stripe_head
blk_mark_disk_dead is the proper interface to shut down a block
device, but it also makes the disk unusable forever.
nbd_clear_sock_ioctl on the other hand wants to shut down the file
system, but allow the block device to be used again when when connected
to another socket. Switch nbd to use disk_force_media_change and
nbd_bdev_reset to go back to a behavior of the old __invalidate_device
call, with the added benefit of incrementing the device generation
as there is no guarantee the old content comes back when the device
is reconnected.
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 0c1c9a27ce ("nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctl")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231003153106.1331363-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
We should favor a more robust and less ambiguous interface.
We expect that both `nullb->disk_name` and `disk->disk_name` be
NUL-terminated:
| snprintf(nullb->disk_name, sizeof(nullb->disk_name),
| "%s", config_item_name(&dev->group.cg_item));
...
| pr_info("disk %s created\n", nullb->disk_name);
It seems like NUL-padding may be required due to __assign_disk_name()
utilizing a memcpy as opposed to a `str*cpy` api.
| static inline void __assign_disk_name(char *name, struct gendisk *disk)
| {
| if (disk)
| memcpy(name, disk->disk_name, DISK_NAME_LEN);
| else
| memset(name, 0, DISK_NAME_LEN);
| }
Then we go and print it with `__print_disk_name` which wraps `nullb_trace_disk_name()`.
| #define __print_disk_name(name) nullb_trace_disk_name(p, name)
This function obviously expects a NUL-terminated string.
| const char *nullb_trace_disk_name(struct trace_seq *p, char *name)
| {
| const char *ret = trace_seq_buffer_ptr(p);
|
| if (name && *name)
| trace_seq_printf(p, "disk=%s, ", name);
| trace_seq_putc(p, 0);
|
| return ret;
| }
>From the above, we need both 1) a NUL-terminated string and 2) a
NUL-padded string. So, let's use strscpy_pad() as per Kees' suggestion
from v1.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230919-strncpy-drivers-block-null_blk-main-c-v3-1-10cf0a87a2c3@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rbd_dev_refresh() has been holding header_rwsem across header and
parent info read-in unnecessarily for ages. With commit 870611e487
("rbd: get snapshot context after exclusive lock is ensured to be
held"), the potential for deadlocks became much more real owning to
a) header_rwsem now nesting inside lock_rwsem and b) rw_semaphores
not allowing new readers after a writer is registered.
For example, assuming that I/O request 1, I/O request 2 and header
read-in request all target the same OSD:
1. I/O request 1 comes in and gets submitted
2. watch error occurs
3. rbd_watch_errcb() takes lock_rwsem for write, clears owner_cid and
releases lock_rwsem
4. after reestablishing the watch, rbd_reregister_watch() calls
rbd_dev_refresh() which takes header_rwsem for write and submits
a header read-in request
5. I/O request 2 comes in: after taking lock_rwsem for read in
__rbd_img_handle_request(), it blocks trying to take header_rwsem
for read in rbd_img_object_requests()
6. another watch error occurs
7. rbd_watch_errcb() blocks trying to take lock_rwsem for write
8. I/O request 1 completion is received by the messenger but can't be
processed because lock_rwsem won't be granted anymore
9. header read-in request completion can't be received, let alone
processed, because the messenger is stranded
Change rbd_dev_refresh() to take header_rwsem only for actually
updating rbd_dev->header. Header and parent info read-in don't need
any locking.
Cc: stable@vger.kernel.org # 0b035401c5: rbd: move rbd_dev_refresh() definition
Cc: stable@vger.kernel.org # 510a7330c8: rbd: decouple header read-in from updating rbd_dev->header
Cc: stable@vger.kernel.org # c10311776f: rbd: decouple parent info read-in from updating rbd_dev
Cc: stable@vger.kernel.org
Fixes: 870611e487 ("rbd: get snapshot context after exclusive lock is ensured to be held")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Unlike header read-in, parent info read-in is already decoupled in
get_parent_info(), but it's buried in rbd_dev_v2_parent_info() along
with the processing logic.
Separate the initial read-in and update read-in logic into
rbd_dev_setup_parent() and rbd_dev_update_parent() respectively and
have rbd_dev_v2_parent_info() just populate struct parent_image_info
(i.e. what get_parent_info() did). Some existing QoI issues, like
flatten of a standalone clone being disregarded on refresh, remain.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Make rbd_dev_header_info() populate a passed struct rbd_image_header
instead of rbd_dev->header and introduce rbd_dev_update_header() for
updating mutable fields in rbd_dev->header upon refresh. The initial
read-in of both mutable and immutable fields in rbd_dev_image_probe()
passes in rbd_dev->header so no update step is required there.
rbd_init_layout() is now called directly from rbd_dev_image_probe()
instead of individually in format 1 and format 2 implementations.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Move rbd_dev_refresh() definition further down to avoid having to
move struct parent_image_info definition in the next commit. This
spares some forward declarations too.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Add batched mq_ops.queue_rqs() support in null_blk for testing. The
implementation is much easy since null_blk doesn't have commit_rqs().
We simply handle each request one by one, if errors are encountered,
leave them in the passed in list and return back.
There is about 3.6% improvement in IOPS of fio/t/io_uring on null_blk
with hw_queue_depth=256 on my test VM, from 1.09M to 1.13M.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230913151616.3164338-6-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now we update driver tags request table in blk_mq_get_driver_tag(),
so the driver that support queue_rqs() have to update that inflight
table by itself.
Move it to blk_mq_start_request(), which is a better place where
we setup the deadline for request timeout check. And it's just
where the request becomes inflight.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230913151616.3164338-5-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block fixes from Jens Axboe:
- Fix null_blk polled IO timeout handling (Chengming)
- Regression fix for swapped arguments in drbd bvec_set_page()
(Christoph)
- String length handling fix for s390 dasd (Heiko)
- Fixes for blk-throttle accounting (Yu)
- Fix page pinning issue for same page segments (Christoph)
- Remove redundant file_remove_privs() call (Christoph)
- Fix a regression in partition handling for devices not supporting
partitions (Li)
* tag 'block-6.6-2023-09-08' of git://git.kernel.dk/linux:
drbd: swap bvec_set_page len and offset
block: fix pin count management when merging same-page segments
null_blk: fix poll request timeout handling
s390/dasd: fix string length handling
block: don't add or resize partition on the disk with GENHD_FL_NO_PART
block: remove the call to file_remove_privs in blkdev_write_iter
blk-throttle: consider 'carryover_ios/bytes' in throtl_trim_slice()
blk-throttle: use calculate_io/bytes_allowed() for throtl_trim_slice()
blk-throttle: fix wrong comparation while 'carryover_ios/bytes' is negative
blk-throttle: print signed value 'carryover_bytes/ios' for user
