1. move display num initialize out of dpm enable tasks.
2. do not set/restore smc telemetry if dpm is runing.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when smu failed, print out the error info immediately
for debug. smum_send_msg_to_smu always return true,
so no need to check return value.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
a bug in programming thermal interrupt register masks out
interrupts and driver cannot receive interrupts. Setting
0 to mask bits will fix it.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lock the dpm levels when we use SW method to modify
the dpm tables directly to avoid a possible race
with the smu.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All thoses headers are not used by any source files.
Lets just remove them.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As auto power profile mode still not support on vega10, so
just restore default profile mode in auto dpm level.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User can change power limit between
[0, 1] * max power limit.
Set power limit to 0, restore to max power limit.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The double parentheses are not needed. Removing them fixes the following
warning when building with clang:
drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c:419:29:
error: equality comparison with extraneous parentheses
[-Werror,-Wparentheses-equality]
if ((data->vdd_gfx_control == SMU7_VOLTAGE_CONTROL_BY_SVID2)) {
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In several locations the driver uses AMD_CG_STATE_UNGATE (type enum
amd_clockgating_state) instead of AMD_PG_STATE_UNGATE (type enum
amd_powergating_stat) and vice versa. Both constants have the same
value, so this doesn't cause any problems, but we still want to pass
the correct type.
Fixing the mismatch resolves multiple warnings like this when building
with clang:
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/cz_clockpowergating.c:169:7:
error: implicit conversion from enumeration type 'enum
amd_powergating_state' to different enumeration type 'enum
amd_clockgating_state' [-Werror,-Wenum-conversion]
AMD_PG_STATE_UNGATE);
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We deleted some code in e154162ef7 ("drm/amd/powerplay: refine pp code
for raven") but there were a few related bits that were missed. Let's
delete them as well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since 12 of the 16 bytes are not initialized with anything let's ensure they're
sensibly zeroed out otherwise debugfs callers will read back garbage
(because they assume debugfs wrote sensible data back...)
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when echo "01">pp_dpm_pcie
the pcie dpm will fix in highest link speed.
But user should expect auto speed between
level 0 and level1
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only user enter manual performance mode, driver allow user
configure the sclk/mclk dpm parameters through sysfs
pp_power_profile_mode.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only when user set manual performance mode, driver
enable pp_dpm_force_clock_level.
so check the mode in pp_dpm_force_clock_level,
and delete the same logic in callback functions.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The trailing semicolon is an empty statement that does no operation.
Removing the two instances of them since they don't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move configurable profiling parameters to struct
profile_mode_setting and initialize current_profile_setting.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when Overdrive voltage, need to disable AVFS.
when OverDriv engine clock, need to recalculate
AVFS voltage by disable/enable avfs feature.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when this bit was set on module load,
driver will allow the user over/under gpu
clock and voltage through sysfs.
by default, this bit was not set.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The additional output are: PSTATE_SCLK and PSTATE_MCLK value
in MHz as:
300 MHz (PSTATE_SCLK)
300 MHz (PSTATE_MCLK)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
