This patch fixes the formatting in the patch
"amdkfd: Do not wait for queue op response during reset"
Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a parameter to amdgpu_sdma_reset_engine() to let the
caller handle the kernel rings. This allows the kernel
rings to back up their unprocessed state if the reset comes in
via the drm scheduler rather than KFD.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the kfd suspend/resume code into the caller. That
is where the KFD is likely to detect a reset so on the KFD
side there is no need to call them. Also add a mutex to
lock the actual reset sequence.
v2: make the locking per instance
Fixes: bac38ca8c4 ("drm/amdkfd: implement per queue sdma reset for gfx 9.4+")
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If reset is detected and kfd need to evict working queues, HWS moving queue will be failed.
Then remaining queues are not evicted and in active state.
After reset done, kfd uses HWS to termination remaining activated queues but HWS is resetted.
So remove queue will be failed again.
[How]
Keep removing all queues even if HWS returns failed.
It will not affect cpsch as it checks reset_domain->sem.
v2: If any queue failed, evict queue returns error.
v3: Declare err inside the if-block.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update pm_update_grace_period() to more cleaner
pm_config_dequeue_wait_counts(). Previously, grace_period variable was
overloaded as a variable and a macro, making it inflexible to configure
additional dequeue wait times.
pm_config_dequeue_wait_counts() now takes in a cmd / variable. This
allows flexibility to update different dequeue wait times.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for more per-process flags starting with option to configure
MFMA precision for gfx 9.5
v2: Change flag name to KFD_PROC_FLAG_MFMA_HIGH_PRECISION
Remove unused else condition
v3: Bump the KFD API version
v4: Missed SH_MEM_CONFIG__PRECISION_MODE__SHIFT define. Added it.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set per-process static sh_mem config only once during process
initialization. Move all static changes from update_qpd() which is
called each time a queue is created to set_cache_memory_policy() which
is called once during process initialization.
set_cache_memory_policy() is currently defined only for cik and vi
family. So this commit only focuses on these two. A separate commit will
address other asics.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To reset hung SDMA queues on GFX 9.4+ for the GFX9 family, a soft reset
must be issued through SMU. Since soft resets will reset an entire SDMA
engine, use a common KGD call to do the reset as the KGD will handle
avoiding a reset of in flight GFX and paging queues on that engine.
In addition, create a common call for all reset types to simplify
the handling of module parameter settings that block gpu resets.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current kfd driver has its own PASID value for a kfd process and uses it to
locate vm at interrupt handler or mapping between kfd process and vm. That
design is not working when a physical gpu device has multiple spatial
partitions, ex: adev in CPX mode. This patch has kfd driver use same pasid
values that graphic driver generated which is per vm per pasid.
These pasid values are passed to fw/hardware. We do not need change interrupt
handler though more pasid values are used. Also, pasid values at log are
replaced by user process pid; pasid values are not exposed to user. Users see
their process pids that have meaning in user space.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The purpose of halt_if_hws_hang is to preserve GPU state for driver
debugging when queue preemption fails. Issuing per-queue reset may
kill wavefronts which caused the preemption failure.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
When using MES creating a pdd will require talking to the GPU to
setup the relevant context. The code here forgot to wake up the GPU
in case it was in suspend, this causes KVM to EFAULT for passthrough
GPU for example. This issue can be masked if the GPU was woken up by
other things (e.g. opening the KMS node) first and have not yet gone to sleep.
v4: do the allocation of proc_ctx_bo in a lazy fashion
when the first queue is created in a process (Felix)
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
as the adding of mb() should be sufficient in function unmap_queues_cpsch,
remove the add of volatile type as recommended
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
make sure KFD_FENCE_INIT write to fence_addr before pm_send_query_status
called, to avoid qcm fence timeout caused by incorrect ordering.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, the code uses the IH_VMID_X_LUT register to map
a queue's vmid to the corresponding PASID. This logic is racy
since CP can update the VMID-PASID mapping anytime especially
when there are more processes than number of vmids. Update the
logic to calculate CU occupancy by matching doorbell offset of
the queue with valid wave counts against the process's queues.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a queue is being destroyed but causes a HWS hang on removal, the KFD
may issue an unnecessary gpu reset if the destroyed queue can be fixed
by a queue reset.
This is because the queue has been removed from the KFD's queue list
prior to the preemption action on destroy so the reset call will fail to
match the HQD PQ reset information against the KFD's queue record to do
the actual reset.
To fix this, deactivate the queue prior to preemption since it's being
destroyed anyways and remove the queue from the KFD's queue list after
preemption.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based on the recommendation of MEC FW, update BadOpcode interrupt
handling by unmapping all queues, removing the queue that got the
interrupt from scheduling and remapping rest of the queues back when
using MES scheduler. This is done to prevent the case where unmapping
of the bad queue can fail thereby causing a GPU reset.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Provide amdgpu_amdkfd_stop_sched() for amdgpu to stop KFD scheduling
compute work on HIQ. amdgpu_amdkfd_start_sched() resumes the scheduling.
When amdgpu_amdkfd_stop_sched is called, KFD will unmap queues from
runlist. If users send ioctls to KFD to create queues, they'll be added
but those queues won't be mapped to runlist (so not scheduled) until
amdgpu_amdkfd_start_sched is called.
v2: fix build (Alex)
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support per-queue reset for GFX9. The recommendation is for the driver
to target reset the HW queue via a SPI MMIO register write.
Since this requires pipe and HW queue info and MEC FW is limited to
doorbell reports of hung queues after an unmap failure, scan the HW
queue slots defined by SET_RESOURCES first to identify the user queue
candidates to reset.
Only signal reset events to processes that have had a queue reset.
If queue reset fails, fall back to GPU reset.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Certain GPUs have better copy performance over xGMI on specific
SDMA engines depending on the source and destination GPU.
Allow users to create SDMA queues on these recommended engines.
Close to 2x overall performance has been observed with this
optimization.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helper function kfd_queue_acquire_buffers to get queue wptr_bo
reference from queue write_ptr if it is mapped to the KFD node with
expected size.
Add wptr_bo to structure queue_properties because structure queue is
allocated after queue buffers are validated, then we can remove wptr_bo
parameter from pqm_create_queue.
Rename structure queue wptr_bo_gart to hold wptr_bo reference for GART
mapping and umapping. Move MES wptr_bo_gart mapping to init_user_queue,
the same location with queue ctx_bo GART mapping.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass pointer reference to amdgpu_bo_unref to clear the correct pointer,
otherwise amdgpu_bo_unref clear the local variable, the original pointer
not set to NULL, this could cause use-after-free bug.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We recently added locking to add_queue_mes() but this error path was
overlooked. Add an unlock to the error path.
Fixes: 1802b042a3 ("drm/amdgpu/kfd: remove is_hws_hang and is_resetting")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
is_hws_hang and is_resetting serves pretty much the same purpose and
they all duplicates the work of the reset_domain lock, just check that
directly instead. This also eliminate a few bugs listed below and get
rid of dqm->ops.pre_reset.
kfd_hws_hang did not need to avoid scheduling another reset. If the
on-going reset decided to skip GPU reset we have a bad time, otherwise
the extra reset will get cancelled anyway.
remove_queue_mes forgot to check is_resetting flag compared to the
pre-MES path unmap_queue_cpsch, so it did not block hw access during
reset correctly.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was an enablement vehicle for MES 11 and was never
productized. Remove it.
v2: drop additional checks in the GFX10 code.
v3: drop mes_api_def.h
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, with F32 HWS GPU reset is only when unmap queue fails.
However, if compute queue doesn't repond to preemption request in time
unmap will return without any error. In this case, only preemption error
is logged and Reset is not triggered. Call GPU reset in this case also.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds the following functionality:
- Check the queue preemption status on all XCDs in a partition
for GFX 9.4.3.
- Update the queue preemption debug message to print the queue
doorbell id for which preemption failed.
- Change the signature of check preemption failed function to
return a bool instead of uint32_t and pass the MQD manager
as an argument.
Suggested-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If fatal error is detected, packet submission won't go through. Return
error in such cases. Also, avoid waiting for fence when fatal error is
detected.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Here, Adding db_size in byte to find the doorbell's
absolute offset for both 32-bit and 64-bit doorbell sizes.
So that doorbell offset will be aligned based on the doorbell
size.
v2:
- Addressed the review comment from Felix.
v3:
- Adding doorbell_size as parameter to get db absolute offset.
v4:
Squash the two patches into one.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are cases where HSA runtime is not enabled through the
AMDKFD_IOC_RUNTIME_ENABLE call when adding queues and the MES ADD_QUEUE
API should clear the MES process context instead of SET_SHADER_DEBUGGER.
Such examples are legacy HSA runtime builds that do not support the
current exception handling and running KFD tests.
The only time ADD_QUEUE.skip_process_ctx_clear is required is for
debugger use cases where a debugged process is always runtime enabled
when adding a queue.
Tested-by: Shikai Guo <shikai.guo@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename KGD_MAX_QUEUES to AMDGPU_MAX_QUEUES to conform with
the naming convention followed in amdgpu_gfx.h. No functional
change.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes the case where the code currently passes
absolute register address and not the reg offset, which HWS
expects, when sending the PM4 packet to set/update CWSR grace
period. Additionally, cleanup the signature of
build_grace_period_packet_info function as it no longer needs
the inst parameter.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To prevent its redundant implementation and streamline
code, use memdup_user.
This fixes warnings reported by Coccinelle:
./drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c:2811:13-20: WARNING opportunity for memdup_user
Signed-off-by: Atul Raut <rauji.raut@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
