Pull iommu updates from Joerg Roedel:
"Core code:
- map/unmap_pages() cleanup
- SVA and IOPF refactoring
- Clean up and document return codes from device/domain attachment
AMD driver:
- Rework and extend parsing code for ivrs_ioapic, ivrs_hpet and
ivrs_acpihid command line options
- Some smaller cleanups
Intel driver:
- Blocking domain support
- Cleanups
S390 driver:
- Fixes and improvements for attach and aperture handling
PAMU driver:
- Resource leak fix and cleanup
Rockchip driver:
- Page table permission bit fix
Mediatek driver:
- Improve safety from invalid dts input
- Smaller fixes and improvements
Exynos driver:
- Fix driver initialization sequence
Sun50i driver:
- Remove IOMMU_DOMAIN_IDENTITY as it has not been working forever
- Various other fixes"
* tag 'iommu-updates-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (74 commits)
iommu/mediatek: Fix forever loop in error handling
iommu/mediatek: Fix crash on isr after kexec()
iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY
iommu/amd: Fix typo in macro parameter name
iommu/mediatek: Remove unused "mapping" member from mtk_iommu_data
iommu/mediatek: Improve safety for mediatek,smi property in larb nodes
iommu/mediatek: Validate number of phandles associated with "mediatek,larbs"
iommu/mediatek: Add error path for loop of mm_dts_parse
iommu/mediatek: Use component_match_add
iommu/mediatek: Add platform_device_put for recovering the device refcnt
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
iommu/vt-d: Use real field for indication of first level
iommu/vt-d: Remove unnecessary domain_context_mapped()
iommu/vt-d: Rename domain_add_dev_info()
iommu/vt-d: Rename iommu_disable_dev_iotlb()
iommu/vt-d: Add blocking domain support
iommu/vt-d: Add device_block_translation() helper
iommu/vt-d: Allocate pasid table in device probe path
iommu/amd: Check return value of mmu_notifier_register()
iommu/amd: Fix pci device refcount leak in ppr_notifier()
...
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Various LED binding conversions and clean-ups. Convert the
ir-spi-led, pwm-ir-tx, and gpio-ir-tx LED bindings to schemas.
Consistently reference LED common.yaml or multi-led schemas and
disallow undefined properties.
- Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
and fsl,imx-fb bindings to schema
- Add ata-generic, Broadcom u-boot environment, and dynamic MTD
sub-partitions bindings.
- Make all SPI based displays reference spi-peripheral-props.yaml
- Fix some schema property regex's which should be fixed strings or
were missing start/end anchors
- Remove 'status' in examples, again...
DT Core:
- Fix a possible NULL dereference in overlay functions
- Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
never worked)
- Add of_address_count() helper to count number of 'reg' entries
- Support .dtso extension for DT overlay source files. Rename staging
and unittest overlay files.
- Update dtc to upstream v1.6.1-63-g55778a03df61"
* tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (42 commits)
dt-bindings: leds: Add missing references to common LED schema
dt-bindings: leds: intel,lgm: Add missing 'led-gpios' property
of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
dt-bindings: lcdif: Fix constraints for imx8mp
media: dt-bindings: atmel,isc: Drop unneeded unevaluatedProperties
dt-bindings: Drop Jee Heng Sia
dt-bindings: thermal: cooling-devices: Add missing cache related properties
dt-bindings: leds: irled: ir-spi-led: convert to DT schema
dt-bindings: leds: irled: pwm-ir-tx: convert to DT schema
dt-bindings: leds: irled: gpio-ir-tx: convert to DT schema
dt-bindings: leds: mt6360: rework to match multi-led
dt-bindings: leds: lp55xx: rework to match multi-led
dt-bindings: leds: lp55xx: switch to preferred 'gpios' suffix
dt-bindings: leds: lp55xx: allow label
dt-bindings: leds: use unevaluatedProperties for common.yaml
dt-bindings: thermal: tsens: Add SM6115 compatible
of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values
dt-bindings: display: Convert fsl,imx-fb.txt to dt-schema
dt-bindings: Add missing start and/or end of line regex anchors
dt-bindings: qcom,pdc: Add missing compatibles
...
Add generic bindings for the Qualcomm variant of the ARM MMU-500. It is
expected that all future platforms will use the generic qcom,smmu-500
compat string in addition to SoC-specific and the generic arm,mmu-500
ones. Older bindings are now described as deprecated.
Note: I have split the sdx55 and sdx65 from the legacy bindings. They
are not supported by the qcom SMMU implementation. I can suppose that
they are using the generic implementation rather than the
Qualcomm-speicific one.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221114170635.1406534-5-dmitry.baryshkov@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The M1 Max/Pro SoCs come with a new DART variant that is incompatible with
the previous one. Add a new compatible for those.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
Pull iommu updates from Joerg Roedel:
- remove the bus_set_iommu() interface which became unnecesary because
of IOMMU per-device probing
- make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- support for AMD IOMMUv2 page-tables for the DMA-API layer.
The v2 page-tables are compatible with the x86 CPU page-tables. Using
them for DMA-API prepares support for hardware-assisted IOMMU
virtualization
- support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- some smaller fixes and cleanups
* tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits)
iommu/vt-d: Avoid unnecessary global DMA cache invalidation
iommu/vt-d: Avoid unnecessary global IRTE cache invalidation
iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support
iommu/vt-d: Remove pasid_set_eafe()
iommu/vt-d: Decouple PASID & PRI enabling from SVA
iommu/vt-d: Remove unnecessary SVA data accesses in page fault path
dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names
iommu: dart: Support t6000 variant
iommu/io-pgtable-dart: Add DART PTE support for t6000
iommu/io-pgtable: Add DART subpage protection support
iommu/io-pgtable: Move Apple DART support to its own file
iommu/mediatek: Add support for MT6795 Helio X10 M4Us
iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173
dt-bindings: mediatek: Add bindings for MT6795 M4U
iommu/iova: Fix module config properly
iommu/amd: Fix sparse warning
iommu/amd: Remove outdated comment
iommu/amd: Free domain ID after domain_flush_pages
iommu/amd: Free domain id in error path
iommu/virtio: Fix compile error with viommu_capable()
...
The QEMU devicetree uses a different order for SMMUv3 interrupt names,
and there isn't a good reason for enforcing a specific order. Since all
interrupt lines are optional, operating systems should not expect a
fixed interrupt array layout; they should instead match each interrupt
to its name individually. Besides, as a result of commit e4783856a2
("dt-bindings: iommu: arm,smmu-v3: make PRI IRQ optional"), "cmdq-sync"
and "priq" are already permutable. Relax the interrupt-names array
entirely by allowing any permutation, incidentally making the schema
more readable.
Note that dt-validate won't allow duplicate names here so we don't need
to specify maxItems or add additional checks, it's quite neat.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220916133145.1910549-1-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Arm SMMU updates for 5.20
- Add even more Qualcomm device-tree compatible strings
- Support dumping of IMP DEF Qualcomm registers on TLB sync timeout
- Fix reference count leak on device tree node in Qualcomm driver
The main purpose of this binding is to communicate Xen specific
information using generic IOMMU device tree bindings (which is
a good fit here) rather than introducing a custom property.
Introduce Xen specific IOMMU for the virtualized device (e.g. virtio)
to be used by Xen grant DMA-mapping layer in the subsequent commit.
The reference to Xen specific IOMMU node using "iommus" property
indicates that Xen grant mappings need to be enabled for the device,
and it specifies the ID of the domain where the corresponding backend
resides. The domid (domain ID) is used as an argument to the Xen grant
mapping APIs.
This is needed for the option to restrict memory access using Xen grant
mappings to work which primary goal is to enable using virtio devices
in Xen guests.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1654197833-25362-6-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Pull iommu updates from Joerg Roedel:
- Intel VT-d driver updates:
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates:
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy
binding
- Minor cleanups
- Fix a BUG_ON in the vfio_iommu_group_notifier:
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group is
either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Make forcing of cache-coherent DMA more coherent between IOMMU
drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu/amd: Increase timeout waiting for GA log enablement
iommu/s390: Tolerate repeat attach_dev calls
iommu/vt-d: Remove hard coding PGSNP bit in PASID entries
iommu/vt-d: Remove domain_update_iommu_snooping()
iommu/vt-d: Check domain force_snooping against attached devices
iommu/vt-d: Block force-snoop domain attaching if no SC support
iommu/vt-d: Size Page Request Queue to avoid overflow condition
iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
iommu/vt-d: Change return type of dmar_insert_one_dev_info()
iommu/vt-d: Remove unneeded validity check on dev
iommu/dma: Explicitly sort PCI DMA windows
iommu/dma: Fix iova map result check bug
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
iommu: iommu_group_claim_dma_owner() must always assign a domain
iommu/arm-smmu: Force identity domains for legacy binding
iommu/arm-smmu: Support Tegra234 SMMU
dt-bindings: arm-smmu: Add compatible for Tegra234 SOC
dt-bindings: arm-smmu: Document nvidia,memory-controller property
iommu/arm-smmu-qcom: Add SC8280XP support
dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP
...
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
The Page Request Interface (PRI) is an optional PCIe feature. As such, a
SMMU would not need to handle it if the PCIe host bridge or the SMMU
itself do not implement it. Also an SMMU could be connected to a platform
device, without any PRI functionality whatsoever.
In all cases there would be no SMMU PRI queue interrupt to be wired up
to an interrupt controller.
At the moment, with the "eventq,gerror,priq,cmdq-sync" order, we
would need to sacrifice the command queue sync interrupt as well, which
might not be desired.
Relax the binding to allow specifying certain useful combinations of
wired interrupts, for instance just the "gerror" interrupt, or omitting
both "pri" and "cmdq-sync".
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-2-andre.przywara@arm.com
On NVIDIA SoC's the ARM SMMU needs to interact with the memory
controller in order to map memory clients to the corresponding stream
IDs. Document how the nvidia,memory-controller property can be used to
achieve this.
Note that this is a backwards-incompatible change that is, however,
necessary to ensure correctness. Without the new property, most of the
devices would still work but it is not guaranteed that all will.
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220429082243.496000-2-thierry.reding@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
In mt8195, we have a new IOMMU that is for INFRA IOMMU. its masters
mainly are PCIe and USB. Different with MM IOMMU, all these masters
connect with IOMMU directly, there is no mediatek,larbs property for
infra IOMMU.
Another thing is about PCIe ports. currently the function
"of_iommu_configure_dev_id" only support the id number is 1, But our
PCIe have two ports, one is for reading and the other is for writing.
see more about the PCIe patch in this patchset. Thus, I only list
the reading id here and add the other id in our driver.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-3-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch adds descriptions for mt8195 IOMMU which also use ARM
Short-Descriptor translation table format.
In mt8195, there are two smi-common HW and IOMMU, one is for vdo(video
output), the other is for vpp(video processing pipe). They connects
with different smi-larbs, then some setting(larbid_remap) is different.
Differentiate them with the compatible string.
Something like this:
IOMMU(VDO) IOMMU(VPP)
| |
SMI_COMMON_VDO SMI_COMMON_VPP
--------------- ----------------
| | ... | | ...
larb0 larb2 ... larb1 larb3 ...
Another change is that we have a new IOMMU that is for infra master like
PCIe and USB. The infra master don't have the larb and ports, thus we
rename the port header file to mt8195-memory-port.h rather than
mt8195-larb-port.h.
Also, the IOMMU is not only for MM, thus, we don't call it "m4u" which
means "MultiMedia Memory Management UNIT". thus, use the "iommu" as the
compatiable string.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-2-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Apple SoCs such as the M1 come with a simple DMA address filter called
SART. Unlike a real IOMMU no pagetables can be configured but instead
DMA transactions can be allowed for up to 16 paddr regions. The consumer
also needs special support since not all DMA allocations have to be
added to this filter.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Pull devicetree updates from Rob Herring:
- Add Krzysztof Kozlowski as co-maintainer for DT bindings providing
much needed help.
- DT schema validation now takes DTB files as input rather than
intermediate YAML files. This decouples the validation from the
source level syntax information. There's a bunch of schema fixes as a
result of switching to DTB based validation which exposed some errors
and incomplete schemas and examples.
- Kbuild improvements to explicitly warn users running 'make
dt_binding_check' on missing yamllint
- Expand DT_SCHEMA_FILES kbuild variable to take just a partial
filename or path instead of the full path to 1 file.
- Convert various bindings to schema format: mscc,vsc7514-switch,
multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS
bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel
SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display
subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma,
msm/mdp4, rda,8810pl-uart
- New schemas for u-boot environment variable partition, TI clksel
- New compatible strings for Renesas RZ/V2L SoC
- Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated
HiSilicon
- Add/fix schemas for QEMU Arm 'virt' machine
- Drop unused of_alias_get_alias_list() function
- Add a script to check DT unittest EXPECT message output. Pass
messages also now print by default at PR_INFO level to help test
automation.
* tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits)
dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable
dt-bindings: nvmem: add U-Boot environment variables binding
dt-bindings: ufs: qcom: Add SM6350 compatible string
dt-bindings: dmaengine: sifive,fu540-c000: include generic schema
dt-bindings: gpio: pca95xx: drop useless consumer example
Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs"
dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent'
dt-bindings: gnss: Add two more chips
dt-bindings: gnss: Rewrite sirfstar binding in YAML
dt-bindings: gnss: Modify u-blox to use common bindings
dt-bindings: gnss: Rewrite common bindings in YAML
dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible
dt-bindings: ata: ahci-platform: Add power-domains property
dt-bindings: ata: ahci-platform: Convert DT bindings to yaml
dt-bindings: kbuild: Use DTB files for validation
dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate
dt-bindings: Add QEMU virt machine compatible
dt-bindings: arm: Convert QEMU fw-cfg to DT schema
dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list
dt-bindings: i2c: convert i2c-at91 to json-schema
...
The 'phandle-array' type is a bit ambiguous. It can be either just an
array of phandles or an array of phandles plus args. Many schemas for
phandle-array properties aren't clear in the schema which case applies
though the description usually describes it.
The array of phandles case boils down to needing:
items:
maxItems: 1
The phandle plus args cases should typically take this form:
items:
- items:
- description: A phandle
- description: 1st arg cell
- description: 2nd arg cell
With this change, some examples need updating so that the bracketing of
property values matches the schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220119015038.2433585-1-robh@kernel.org
Pull iommu updates from Joerg Roedel:
- Identity domain support for virtio-iommu
- Move flush queue code into iommu-dma
- Some fixes for AMD IOMMU suspend/resume support when x2apic is used
- Arm SMMU Updates from Will Deacon:
- Revert evtq and priq back to their former sizes
- Return early on short-descriptor page-table allocation failure
- Fix page fault reporting for Adreno GPU on SMMUv2
- Make SMMUv3 MMU notifier ops 'const'
- Numerous new compatible strings for Qualcomm SMMUv2 implementations
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (38 commits)
iommu/iova: Temporarily include dma-mapping.h from iova.h
iommu: Move flush queue data into iommu_dma_cookie
iommu/iova: Move flush queue code to iommu-dma
iommu/iova: Consolidate flush queue code
iommu/vt-d: Use put_pages_list
iommu/amd: Use put_pages_list
iommu/amd: Simplify pagetable freeing
iommu/iova: Squash flush_cb abstraction
iommu/iova: Squash entry_dtor abstraction
iommu/iova: Fix race between FQ timeout and teardown
iommu/amd: Fix typo in *glues … together* in comment
iommu/vt-d: Remove unused dma_to_mm_pfn function
iommu/vt-d: Drop duplicate check in dma_pte_free_pagetable()
iommu/vt-d: Use bitmap_zalloc() when applicable
iommu/amd: Remove useless irq affinity notifier
iommu/amd: X2apic mode: mask/unmask interrupts on suspend/resume
iommu/amd: X2apic mode: setup the INTX registers on mask/unmask
iommu/amd: X2apic mode: re-enable after resume
iommu/amd: Restore GA log/tail pointer on host resume
iommu/iova: Move fast alloc size roundup into alloc_iova_fast()
...
This will bind to the PMGR pwrstate nodes that control power/clock
gating to SoC blocks. The DART driver doesn't do runtime-pm yet, so
initially this will just keep the domain on permanently.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
