Rather than having the connector init get the fixed mode back from
intel_panel and then feed it straight back into intel_panel_init()
let's just make the fixed mode lookup put the mode directly onto
the panel's fixed_modes list. Avoids the pointless round trip and
opens the door for further enhancements to the fixed mode handling.
v2: Make the debug message correct by using intel_panel_drrs_type() (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
PIPE_MBUS_DBOX_CTL was only being programmed when a pipe is being
enabled but that could potentially cause issues as it could have
mismatching values while pipes are being enabled.
So here moving the PIPE_MBUS_DBOX_CTL programming of all pipes to be
executed before the function that enables all pipes, leaving all pipes
with a matching A_CREDIT value.
While at it, also moving it to intel_pm.c as we are trying to reduce
the gigantic size of intel_display.c and intel_pm.c have other MBUS
programing sequences.
v2:
- do not program PIPE_MBUS_DBOX_CTL if pipe will not be active or
when it do not needs modeset
- remove the checks to wait a vblank
v3:
- checking if dbuf state is present in state before using it
v4:
- removing redundant checks
- calling intel_atomic_get_new_dbuf_state instead of
intel_atomic_get_dbuf_state
BSpec: 49213
BSpec: 50343
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330155724.255226-3-jose.souza@intel.com
Despite the name intel_panel_edid_fixed_mode() doesn't actually
look in the EDID. All it does is dig out the preferred mode from
the connector's probed_modes list. That is also what the SDVO
LVDS code is doing by hand. Let's just call
intel_panel_edid_fixed_mode().
The slight difference in behaviour is that the SDVO code currently
bails if it can't find the preferred mode, whereas
intel_panel_edid_fixed_mode() will fall back to just returning
the first mode from the probed_modes list. Can't imagine why
such an LVDS panel would even exist, and also why would you have
a panel and be expected to not use it? So I'm going to assume
this is a total non-issue.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Move most of the pipe+output CSC programming to the
.color_commit_noarm() hook which runs before vblank evasion.
Only PIPE_CSC_MODE (the arming register) needs to remain in
inside the critical section.
A test case that just updates the CTM in a loop produces
the following i915_update_info numbers on ilk (w/o lockdep):
old new
Updates: 10012 Updates: 10008
| |
1us |** 1us |**********
|************* |*************
4us |********* 4us |*
|* |**
16us | 16us |
| |
66us | 66us |
| |
262us | 262us |
| |
1ms | 1ms |
| |
4ms | 4ms |
| |
17ms | 17ms |
| |
Min update: 1345ns Min update: 1268ns
Max update: 16672ns Max update: 15656ns
Average update: 3914ns Average update: 2185ns
Overruns > 100us: 0 Overruns > 100us: 0
And here is tgl (forced to update both pipe CSC and
output CSC, and with lockdep enabled):
old new
Updates: 10012 Updates: 10012
| |
1us | 1us |
| |
4us |* 4us |**
|** |**********
16us |************* 16us |*************
|* |
66us | 66us |
| |
262us | 262us |
| |
1ms | 1ms |
| |
4ms | 4ms |
| |
17ms | 17ms |
| |
Min update: 5204ns Min update: 5176ns
Max update: 176038ns Max update: 186685ns
Average update: 23931ns Average update: 16654ns
Overruns > 250us: 0 Overruns > 250us: 0
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220224165103.15682-5-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
All the skl+ scaler registers are suitably confined to their own
cachelines so we don't need the uncore.lock to globally serialize
access to these registers. We actually already dropped some of this
in commit 14ad15296d ("drm/i915: Make skl+ universal plane
registers unlocked") as the plane scaler enabling/reconfiguration
became lockless. So let's complete that and remove the rest of
the locks from the scaler programming as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220224165103.15682-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
At least some DELL monitors (P2715Q) with DPCD_REV 1.2 return corrupted
DPCD register values when reading from the 0xF0000- LTTPR range with an
AUX transaction block size bigger than 1. The DP standard requires 0 to
be returned - as for any other reserved/invalid addresses - but these
monitors return the DPCD_REV register value repeated in each byte of the
read buffer. This will in turn corrupt the values returned by the LTTPRs
between the source and the monitor: LTTPRs must adjust the values they
read from the downstream DPRX, for instance right-shift/init the
downstream DP_PHY_REPEATER_CNT value. Since the value returned by the
monitor's DPRX is non-zero the adjusted values will be corrupt.
Reading the LTTPR registers one-by-one instead of reading all of them
with a single AUX transfer works around the issue.
According to the DP standard's 0xF0000 register description:
"LTTPR-related registers at DPCD Addresses F0000h through F02FFh are
valid only for DPCD r1.4 (or higher)." While it's unclear if DPCD r1.4
refers to the DPCD_REV or to the
LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV register (tickets filed
at the VESA site to clarify this haven't been addressed), one
possibility is that it's a restriction due to non-compliant monitors
described above. Disabling the non-transparent LTTPR mode for all such
monitors is not a viable solution: the transparent LTTPR mode has its
own issue causing link training failures and this would affect a lot of
monitors in use with DPCD_REV < 1.4. Instead this patch works around
the problem by reading the LTTPR common and PHY cap registers one-by-one
for any monitor with a DPCD_REV < 1.4.
The standard requires the DPCD capabilities to be read after the LTTPR
common capabilities are read, so re-read the DPCD capabilities after
the LTTPR common and PHY caps were read out.
v2:
- Use for instead of a while loop. (Ville)
- Add to code comment the monitor model with the problem.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4531
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322143844.42616-1-imre.deak@intel.com
Pull drm fixes from Dave Airlie:
"Some fixes were queued up in and in light of the fbdev regressions,
I've pulled those in as well.
core:
- Make audio and color plane support checking only happen when a CEA
extension block is found.
- Small selftest fix.
fbdev:
- two regressions fixes from speedup patches.
ttm:
- Fix a small regression from ttm_resource_fini()
i915:
- Reject unsupported TMDS rates on ICL+
- Treat SAGV block time 0 as SAGV disabled
- Fix PSF GV point mask when SAGV is not possible
- Fix renamed INTEL_INFO->media.arch/ver field"
* tag 'drm-next-2022-03-25' of git://anongit.freedesktop.org/drm/drm:
fbdev: Fix cfb_imageblit() for arbitrary image widths
fbdev: Fix sys_imageblit() for arbitrary image widths
drm/edid: fix CEA extension byte #3 parsing
drm/edid: check basic audio support on CEA extension block
drm/i915: Fix renamed struct field
drm/i915: Fix PSF GV point mask when SAGV is not possible
drm/i915: Treat SAGV block time 0 as SAGV disabled
drm/i915: Reject unsupported TMDS rates on ICL+
drm/selftest: plane_helper: Put test structures in static storage
drm/ttm: Fix a kernel oops due to an invalid read
Pull drm updates from Dave Airlie:
"Lots of work all over, Intel improving DG2 support, amdkfd CRIU
support, msm new hw support, and faster fbdev support.
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device"
* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
drm/i915/display: Do not re-enable PSR after it was marked as not reliable
drm/i915/display: Fix HPD short pulse handling for eDP
drm/amdgpu: Use drm_mode_copy()
drm/radeon: Use drm_mode_copy()
drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
drm/amdgpu: Remove pointless on stack mode copies
drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
drm/amdgpu/dc: fix typos in comments
drm/amdgpu: fix typos in comments
drm/amd/pm: fix typos in comments
drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
drm/amdkfd: evict svm bo worker handle error
drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
drm/amdgpu: only allow secure submission on rings which support that
drm/amdgpu: fixed the warnings reported by kernel test robot
drm/amd/display: 3.2.177
drm/amd/display: [FW Promotion] Release 0.0.108.0
drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
drm/amd/display: Wait for hubp read line for Pollock
...
Make the dbuf bandwidth min cdclk calculations match the spec
more closely. Supposedly the arbiter can only guarantee an equal
share of the total bandwidth of the slice to each active plane
on that slice. So we take the max bandwidth of any of the planes
on each slice and multiply that by the number of active planes
on the slice to get a worst case estimate on how much bandwidth
we require.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-9-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Handle the plane relative data rate in exactly the same
way as we already handle the real data rate. Ie. pre-calculate
it during intel_plane_atomic_check_with_state(), and assign/clear
it for the Y plane as needed. This should guarantee that the
tracking is 100% consistent, and makes me have to think less
when the same apporach is used by both types of data rate.
We might even want to consider replacing the relative
data rate with the real data rate entirely, but it's not
clear if that will produce less optimal plane ddb
allocations. So for now lets keep using the current approach.
v2: Rebase due to async flip wm optimization
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-4-ville.syrjala@linux.intel.com
Let's store the plane allocation in a manner which more closely
matches how the hw operates. That is, we store the packed/CbCr
ddb in one struct, and the Y ddb in another. Currently we're
storing packed/Y in one struct, CbCr in the other.
This also works pretty well for icl+ where the UV plane is
the main plane and the Y plane is subservient to it. Although
in this case we do not even use ddb_y as we do the ddb allocation
in terms of hw planes.
v2: Rebase
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-2-ville.syrjala@linux.intel.com
