Fortunately, all the interrupts we need to bring up basic display support
are contained in a single leaf register, allowing this basic (but hackish)
implementation.
There's a bunch more invasive patches to come implementing all this in a
better/more complete way, but trying to get a minimal series out first.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
VPLL regs changed a bit. There's more stuff to do around these, but it's
less invasive to stick those changes into disp for now.
None of that belongs here anymore anyhow - fix that someday.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It technically loads, and runs, but is ultimately pointless outside of
a very narrow window (fanless systems where one wants to attempt using
the, broken for a lot of gm20x, memory reclocking code).
It's also potentially dangerous to override the VBIOS-provided "Pre-OS"
PMU, which would be responsible for fan control otherwise.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This will prevent some pain with broken firmware trees, as under some
circumstances the HSFW can fail and leave the GPU in a state we don't
know how to recover from.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nvkm_timer_wait_init() takes a u64 as a duration parameter, but the
expression "(m) * 1000" will be promoted only to a 32-bit integer,
if 'm' is also an integer. Changing the 1000 to 1000ULL ensures that
the expression will be 64 bits.
This change currently has no effect as there are no callers of
nvkm_msec() that exceed 2000ms.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
ACR is responsible for managing the firmware for LS (Low Secure) falcons,
this was previously handled in the driver by SECBOOT.
This rewrite started from some test code that attempted to replicate the
procedure RM uses in order to debug early Turing ACR firmwares that were
provided by NVIDIA for development.
Compared with SECBOOT, the code is structured into more individual steps,
with the aim of making the process easier to follow/debug, whilst making
it possible to support newer firmware versions that may have a different
binary format or API interface.
The HS (High Secure) binary(s) are now booted earlier in device init, to
match the behaviour of RM, whereas SECBOOT would delay this until we try
to boot the first LS falcon.
There's also additional debugging features available, with the intention
of making it easier to solve issues during FW/HW bring-up in the future.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We perform memory allocations long before we hit the code in SECBOOT that
would unlock the VPR, which could potentially result in memory allocation
within the locked region.
Run the scrubber binary right after VRAM init to ensure we don't.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When the PMU/SEC2 LS FWs have booted, they'll send a message to the host
with various information, including the configuration of message/command
queues that are available.
Move the handling for this to the relevant subdevs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This moves the code to generate commands for the ACR unit of the PMU/SEC2 LS
firmwares to those subdevs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Code to interface with LS firmwares is being moved to the subdevs where it
belongs, rather than living in the common falcon code.
This is an incremental step towards that goal.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Code to interface with LS firmwares is being moved to the subdevs where it
belongs, rather than living in the common falcon code.
This is an incremental step towards that goal.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Code to interface with LS firmwares is being moved to the subdevs where it
belongs, rather than living in the common falcon code.
This is an incremental step towards that goal.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This will allow us to register the falcon with ACR, and further customise
its behaviour by providing the nvkm_falcon_func structure directly.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
ACR LS FW loading is moving out of SECBOOT and into their specific subdevs,
and the available GM20B/GP10B FWs have interface differences.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This will allow us to register the falcon with ACR, and further customise
its behaviour by providing the nvkm_falcon_func structure directly.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
PMU, SEC2 and GR will be modified to register their falcons with ACR before
the main commit switching everything over.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There are extra registers that need to be programmed to make the level 2
cache work on GP10B, such as the stream ID register that is used when an
SMMU is used to translate memory addresses.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There is no BAR2 on GP10B and there is no need to map through BAR2
because all memory is shared between the GPU and the CPU. Add a custom
implementation of the fault sub-device that uses nvkm_memory_addr()
instead of nvkm_memory_bar2() to return the address of a pinned fault
buffer.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Added GPIO is "Power Alert". It's uncertain if this
GPIO is set on GPU initialization or only if a change is detected by the
GPU at runtime.
This GPIO can be found on Tesla and sometimes on Fermi GPUs.
Untested, wrote according to documentation.
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Added GPIO is "Thermal and External Power Detect". It's uncertain if this
GPIO is set on GPU initialization or only if a change is detected by the
GPU at runtime.
This GPIO can be found in Rankine and Curie and rarely on Tesla GPUs
VBIOS.
Untested, wrote according to documentation.
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Currently, nouveau doesn't check if GPU is missing power. This
patch makes nouveau fail when this happens on latest GPUs.
It checks GPIO function 121 (External Power Emergency), which
should detect power problems on GPU initialization.
This can be disabled with nouveau.config=NvPowerChecks=1
Tested on TU104, GP106 and GF100.
v3:
* Add config override for disabling power checks
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
One gpio was in wrong place, moved it for better readability.
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There's already a condition in place which attempts to detect this, but
since we've begun to require a PMU subdev even on boards where we don't
load a custom FW, it's become inaccurate.
This will prevent unnecessarily running a periodic fan update thread on
GP100 and newer, where we don't yet override the default PMU FW.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The bulk SPDX addition made all these files into GPL-2.0 licensed files.
However the remainder of the project is MIT-licensed, these files
(primarily header files) were simply missing the boiler plate and got
caught up in the global update.
Fixes: b24413180f (License cleanup: add SPDX GPL-2.0 license identifier to files with no license)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
