The new common dma-buf locking convention will require buffer importers
to hold the reservation lock around mapping operations. Make DRM GEM core
to take the lock around the vmapping operations and update DRM drivers to
use the locked functions for the case where DRM core now holds the lock.
This patch prepares DRM core and drivers to the common dynamic dma-buf
locking convention.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017172229.42269-4-dmitry.osipenko@collabora.com
Currently, if we encounter unimplemented functions, it is difficult to
tell what caused them just by looking at dmesg and that is compounded by
the fact that it is often hard to reproduce said issues, for instance we
have had reports of this condition being triggered when removing a
secondary display that is setup in mirror mode and is connected using
usb-c. So, to have access to more detailed debugging information, add an
ASSERT() to dal_irq_service_ack() and dal_irq_service_set() that only
triggers when we encounter an unimplemented function.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When booting a kernel compiled with CONFIG_CFI_CLANG on a machine with
an RX 6700 XT, there is a CFI failure in kfd_destroy_mqd_cp():
[ 12.894543] CFI failure at kfd_destroy_mqd_cp+0x2a/0x40 [amdgpu] (target: hqd_destroy_v10_3+0x0/0x260 [amdgpu]; expected type: 0x8594d794)
Clang's kernel Control Flow Integrity (kCFI) makes sure that all
indirect call targets have a type that exactly matches the function
pointer prototype. In this case, hqd_destroy()'s third parameter,
reset_type, should have a type of 'uint32_t' but every implementation of
this callback has a third parameter type of 'enum kfd_preempt_type'.
Update the function pointer prototype to match reality so that there is
no more CFI violation.
Link: https://github.com/ClangBuiltLinux/linux/issues/1738
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap’s pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and are still valid.
Since its use in amdgpu/amdgpu_ttm.c is safe, it should be preferred.
Therefore, replace kmap() with kmap_local_page() in amdgpu/amdgpu_ttm.c.
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The use of kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
the mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap’s pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and still valid.
Therefore, replace kmap() with kmap_local_page() in radeon_ttm_gtt_read().
Cc: "Venkataramanan, Anirudh" <anirudh.venkataramanan@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Building 32-bit images may fail with the following error.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:
In function ‘dml32_UseMinimumDCFCLK’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:3142:1:
error: the frame size of 1096 bytes is larger than 1024 bytes
This is seen when building i386:allmodconfig with any of the following
compilers.
gcc (Debian 12.2.0-3) 12.2.0
gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0
The problem is not seen if the compiler supports GCC_PLUGIN_LATENT_ENTROPY
because in that case CONFIG_FRAME_WARN is already set to 2048 even for
32-bit builds.
dml32_UseMinimumDCFCLK() was introduced with commit dda4fb85e4
("drm/amd/display: DML changes for DCN32/321"). It declares a large
number of local variables. Increase the frame size for the affected
file to 2048, similar to other files in the same directory, to enable
32-bit build tests with affected compilers.
Fixes: dda4fb85e4 ("drm/amd/display: DML changes for DCN32/321")
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Łukasz Bartosik <ukaszb@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RAS error address translation algorithm is common
across dGPU and A + A platform as along as the SOC
integrates the same generation of UMC IP.
UMC RAS is managed by x86 MCA on A + A platform,
umc_ras in GPU driver is not initialized at all on
A + A platform. In such case, any umc_ras callback
implemented for dGPU config shouldn't be invoked
from A + A specific callback.
The change moves convert_error_address out of dGPU
umc_ras structure and makes it share between A + A
and dGPU config.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In SRIOV multi-vf, dpm is always disabled, and pm_attr_list won't
be initialized. There will be a NULL pointer call trace after
removing the dpm check condition in amdgpu_pm_sysfs_fini.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:amdgpu_device_attr_remove_groups+0x20/0x90 [amdgpu]
Call Trace:
<TASK>
amdgpu_pm_sysfs_fini+0x2f/0x40 [amdgpu]
amdgpu_device_fini_hw+0xdf/0x290 [amdgpu]
[How]
List pm_attr_list should be initialized when dpm is disabled.
Fixes: a6ad27cec5 ("drm/amd/pm: Remove redundant check condition")
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
temporarily disable thermal alert on smu_v13_0_10 due to kfd test fail.
will enable it again after confirming the thermal hardware setting.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 16fb4dca95.
Unfortunately, that commit causes fan monitors can't be read and written
properly.
Fixes: 16fb4dca95 ("drm/amdgpu: getting fan speed pwm for vega10 properly")
Signed-off-by: Asher Song <Asher.Song@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- refactor mode2 on v11.0.7 to align with aldebaran
- comment out using mode2 reset as default for now, will introduce
another controller to replace previous reset_level_mask
v2: squash in unused variable removal (Alex)
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit dac6b80818.
This commit reverted the AMDGPU_SKIP_MODE2_RESET as it conflicts with
the original design of reset handler. Will redesign it.
Fixes: dac6b80818 ("drm/amdgpu: let mode2 reset fallback to default when failure")
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 5bd8d53f6f.
This commit breaks the reset logic for aldebaran, revert it for now.
Will move the mask inside the reset handler.
Fixes: 5bd8d53f6f ("drm/amdgpu: add debugfs amdgpu_reset_level")
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For asic with VF MMIO access protection avoid using CPU for VM table updates.
CPU pagetable updates have issues with HDP flush as VF MMIO access protection
blocks write to mmBIF_BX_DEV0_EPF0_VF0_HDP_MEM_COHERENCY_FLUSH_CNTL register
during sriov runtime.
v3: introduce virtualization capability flag AMDGPU_VF_MMIO_ACCESS_PROTECT
which indicates that VF MMIO write access is not allowed in sriov runtime
Signed-off-by: Danijel Slivka <danijel.slivka@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After commit 571c053658 ("drm/amdgpu: switch sdma buffer function
tear down to a helper"), the variable 'ring' is not used anymore, it
can be removed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We're observing sporadic HuC delayed load timeouts in CI, due to mei_pxp
binding completing later than we expected. HuC is still loaded when the
bind occurs, but in the meantime i915 has started allowing submission to
the VCS engines even if HuC is not there.
In most of the cases I've observed, the timeout was due to the
init/resume of another driver between i915 and mei hitting errors and
thus adding an extra delay, but HuC was still loaded before userspace
could submit, because the whole resume process time was increased by the
delays.
Given that there is no upper bound to the delay that can be introduced
by other drivers, I've reached the following compromise with the media
team:
1) i915 is going to bump the timeout to 5s, to reduce the probability
of reaching it. We still expect HuC to be loaded before userspace
starts submitting, so increasing the timeout should have no impact on
normal operations, but in case something weird happens we don't want to
stall video submissions for too long.
2) The media driver will cope with the failing submissions that manage
to go through between i915 init/resume complete and HuC loading, if any
ever happen. This could cause a small corruption of video playback
immediately after a resume (we should be safe on boot because the media
driver polls the HUC_STATUS ioctl before starting submissions).
Since we're accepting the timeout as a valid outcome, I'm also reducing
the print verbosity from error to notice.
v2: use separate prints for MEI GSC and MEI PXP init timeouts (John)
v3: add MISSING_CASE to the if-else chain (John)
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7033
Fixes: 27536e0327 ("drm/i915/huc: track delayed HuC load with a fence")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013203245.1801788-1-daniele.ceraolospurio@intel.com
MTL's graphics IP (Xe_LPG) once again changes the multicast register
types and steering details. Key changes from past platforms:
* The number of instances of some MCR types (NODE, OAAL2, and GAM) vary
according to the MTL subplatform and cannot be read from fuse
registers. However steering to instance #0 will always provided a
non-terminated value, so we can lump these all into a single
"instance0" table.
* The MCR steering register (and its bitfields) has changed.
Unlike past platforms, we will be explicitly steering all types of MCR
accesses, including those for "SLICE" and "DSS" ranges; we no longer
rely on implicit steering. On previous platforms, various
hardware/firmware agents that needed to access registers typically had
their own steering control registers, allowing them to perform multicast
steering without clobbering the CPU/kernel steering. Starting with MTL,
more of these agents now share a single steering register (0xFD4) and it
is no longer safe for us to assume that the value will remain unchanged
from how we initialized it during startup. There is also a slight
chance of race conditions between the driver and a hardware/firmware
agent, so the hardware provides a semaphore register that can be used to
coordinate access to the steering register. Support for the semaphore
register will be introduced in a future patch.
v2:
- Use Xe_LPG terminology instead of "MTL 3D" since it's the IP version
we're matching on now rather than the platform.
- Don't combine l3bank and mslice masks into a union. It's not related
to the other changes here and we might still need both of them on
some future platform.
- Separate debug dumping of steering settings to a separate helper
function. (Tvrtko)
- Update debug dumping to include DSS ranges (and future-proof it so
that any new ranges added on future platforms will also be dumped).
- Restore MULTICAST bit at the end of rw_with_mcr_steering_fw() if we
cleared it. Also force the MULTICAST bit to true at the beginning of
multicast writes just to be safe. (Bala)
Bspec: 67788, 67112
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-14-matthew.d.roper@intel.com
Rather than treating multicast registers as 'i915_reg_t' let's define
them as a completely new type. This will allow the compiler to help us
make sure we're using multicast-aware functions to operate on multicast
registers.
This plan does break down a bit in places where we're just maintaining
heterogeneous lists of registers (e.g., various MMIO whitelists used by
perf, GVT, etc.) rather than performing reads/writes. We only really
care about the offset in those cases, so for now we can "cast" the
registers as non-MCR, leaving us with a list of i915_reg_t's, but we may
want to look for better ways to store mixed collections of i915_reg_t
and i915_mcr_reg_t in the future.
v2:
- Add TLB invalidation registers
v3:
- Make type checking of i915_mmio_reg_offset() stricter. It will
accept either i915_reg_t or i915_mcr_reg_t, but will now raise a
compile error if any other type is passed, even if that type contains
a 'reg' field. (Jani)
- Drop a ton of GVT changes; allowing i915_mmio_reg_offset() to take
either an i915_reg_t or an i915_mcr_reg_t means that the huge lists
of MMIO_D*() macros used in GVT will continue to work without
modification. We need only make changes to structures that have an
explicit i915_reg_t in them now.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-13-matthew.d.roper@intel.com
MCR registers can be placed on the GuC's save/restore list, but at the
moment they are always handled in a multicast manner (i.e., the GuC
reads one instance to save the value and then does a multicast write to
restore that single value to all instances). In the future the GuC will
probably give us an alternate interface to do unicast per-instance
save/restore operations, so we should be very clear about which
registers on the list are MCR registers (and in the future which
save/restore behavior we want for them).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-11-matthew.d.roper@intel.com
Xe_HP has some MCR registers that need to be polled for completion of
operations like TLB invalidation. Those registers are in the GAM range,
which rolls up the status from each unit into the 'primary' instance's
value. This makes it useful to have a dedicated 'wait for register'
function that handles this on MCR registers, similar to the
__intel_wait_for_register_fw() function we already have for regular
registers.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-8-matthew.d.roper@intel.com
On Xe_HP the fault registers are now in a multicast register range.
However as part of the GAM these registers follow special rules and we
need only read from the "primary" GAM's instance to get the information
we need. So a single intel_gt_mcr_read_any() (which will automatically
steer to the primary GAM) is sufficient; we don't need to loop over each
instance of the MCR register.
v2:
- Update more instances of fault registers. (Bala)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-7-matthew.d.roper@intel.com
Starting in Xe_HP, several registers our driver works with have been
converted from singleton registers into replicated registers with
multicast behavior. Although the registers are still located at the
same MMIO offsets as on previous platforms, let's duplicate the register
definitions in preparation for upcoming patches that will handle
multicast registers in a special manner.
The registers that are now replicated on Xe_HP are:
* PAT_INDEX (mslice replication)
* FF_MODE2 (gslice replication)
* COMMON_SLICE_CHICKEN3 (gslice replication)
* SLICE_COMMON_ECO_CHICKEN1 (gslice replication)
* SLICE_UNIT_LEVEL_CLKGATE (gslice replication)
* LNCFCMOCS (lncf replication)
Note that there are a couple places in selftest_mocs.c where the
gen9 version of LNCFCMOCS is still used without regards for which
platform we're on. Those cases are just doing an offset lookup and not
issuing any CPU reads/writes of the register, so the potentially
multicast nature of the register doesn't come into play.
v2:
- Add commit message note about the unconditional GEN9_LNCFCMOCS usage
in selftest_mocs. (Bala)
- Include some additional TLB registers.
Bspec: 66534
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-3-matthew.d.roper@intel.com
