Before enabling new crtc, stream_count in dc_state does not sync with
that in drm_atomic_state. Validating dsc in such case would leave newly
added stream not jointly participating in dsc optimization with existing
streams, but simply using default initialized vcpi all the time which
gives wrong dsc determination decision.
Consider the scenaio where one 4k60 connected to the dock under dp-alt mode.
Since dp-alt mode is 2-lane setup, stream 1 consumes 63 slots with dsc needed.
Then hook up a second 4k60 to the dock.
stream 2 connected with 65 slot initialized by default without dsc. dsc
pre validate will not jointly optimize stream 2 with stream 1 before
crtc 2 added into the dc_state. That leads to stream 2 not getting dsc
optimization, and trigger atomic_check failure all the time, as 65 > 63
limit.
After getting all new crtcs added into the state, stream_count in
dc_state correctly reflect that in drm_atomic_state which comes up with
correct dsc decision.
Fixes: 71be4b16d3 ("drm/amd/display: dsc validate fail not pass to atomic check")
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Diagnostics reports exceptions generated when timeout waiting for
DISPCLK frequency divider change expires when testing ODM4to1.
Diagnostics reports exceptions generated when timeout waiting for OTG
busy status expires when disabling OTG during ODM4to1 test.
[How]
Increase HW status waiting time for DISPCLK frequency divider change and
OTG busy status when disable OTG.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Bandwidth validation is using Freesync parameters
from previous Freesync state.
Bandwidth validation ignores DCFCLK calculated
after Freesync parameters are configured
[How]
Set Freesync bandwidth parameters to its default
state before running bandwidth validation.
Take DCFCLK calculated after Freesync bandwidth
parameters are assigned and bandwidth is
recalculated.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If psr_feature_enable is set to true by default, it continues to be enabled
for non capable links.
[How]
explicitly disable the feature on links that are not capable of the same.
Fixes: 8c322309e4 ("drm/amd/display: Enable PSR")
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15+
Pull hyperv updates from Wei Liu:
- Remove unnecessary delay while probing for VMBus (Stanislav
Kinsburskiy)
- Optimize vmbus_on_event (Saurabh Sengar)
- Fix a race in Hyper-V DRM driver (Saurabh Sengar)
- Miscellaneous clean-up patches from various people
* tag 'hyperv-next-signed-20221009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Replace kmap() with kmap_local_page()
drm/hyperv: Add ratelimit on error message
hyperv: simplify and rename generate_guest_id
Drivers: hv: vmbus: Split memcpy of flex-array
scsi: storvsc: remove an extraneous "to" in a comment
Drivers: hv: vmbus: Don't wait for the ACPI device upon initialization
Drivers: hv: vmbus: Use PCI_VENDOR_ID_MICROSOFT for better discoverability
Drivers: hv: vmbus: Fix kernel-doc
drm/hyperv: Don't overwrite dirt_needed value set by host
Drivers: hv: vmbus: Optimize vmbus_on_event
Pull iommu updates from Joerg Roedel:
- remove the bus_set_iommu() interface which became unnecesary because
of IOMMU per-device probing
- make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- support for AMD IOMMUv2 page-tables for the DMA-API layer.
The v2 page-tables are compatible with the x86 CPU page-tables. Using
them for DMA-API prepares support for hardware-assisted IOMMU
virtualization
- support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- some smaller fixes and cleanups
* tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits)
iommu/vt-d: Avoid unnecessary global DMA cache invalidation
iommu/vt-d: Avoid unnecessary global IRTE cache invalidation
iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support
iommu/vt-d: Remove pasid_set_eafe()
iommu/vt-d: Decouple PASID & PRI enabling from SVA
iommu/vt-d: Remove unnecessary SVA data accesses in page fault path
dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names
iommu: dart: Support t6000 variant
iommu/io-pgtable-dart: Add DART PTE support for t6000
iommu/io-pgtable: Add DART subpage protection support
iommu/io-pgtable: Move Apple DART support to its own file
iommu/mediatek: Add support for MT6795 Helio X10 M4Us
iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173
dt-bindings: mediatek: Add bindings for MT6795 M4U
iommu/iova: Fix module config properly
iommu/amd: Fix sparse warning
iommu/amd: Remove outdated comment
iommu/amd: Free domain ID after domain_flush_pages
iommu/amd: Free domain id in error path
iommu/virtio: Fix compile error with viommu_capable()
...
Pull Kbuild updates from Masahiro Yamada:
- Remove potentially incomplete targets when Kbuid is interrupted by
SIGINT etc in case GNU Make may miss to do that when stderr is piped
to another program.
- Rewrite the single target build so it works more correctly.
- Fix rpm-pkg builds with V=1.
- List top-level subdirectories in ./Kbuild.
- Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in
kallsyms.
- Avoid two different modules in lib/zstd/ having shared code, which
potentially causes building the common code as build-in and modular
back-and-forth.
- Unify two modpost invocations to optimize the build process.
- Remove head-y syntax in favor of linker scripts for placing
particular sections in the head of vmlinux.
- Bump the minimal GNU Make version to 3.82.
- Clean up misc Makefiles and scripts.
* tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
docs: bump minimal GNU Make version to 3.82
ia64: simplify esi object addition in Makefile
Revert "kbuild: Check if linker supports the -X option"
kbuild: rebuild .vmlinux.export.o when its prerequisite is updated
kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o
zstd: Fixing mixed module-builtin objects
kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols
kallsyms: take the input file instead of reading stdin
kallsyms: drop duplicated ignore patterns from kallsyms.c
kbuild: reuse mksysmap output for kallsyms
mksysmap: update comment about __crc_*
kbuild: remove head-y syntax
kbuild: use obj-y instead extra-y for objects placed at the head
kbuild: hide error checker logs for V=1 builds
kbuild: re-run modpost when it is updated
kbuild: unify two modpost invocations
kbuild: move vmlinux.o rule to the top Makefile
kbuild: move .vmlinux.objs rule to Makefile.modpost
kbuild: list sub-directories in ./Kbuild
Makefile.compiler: replace cc-ifversion with compiler-specific macros
...
Currently we do the DRIVER_ATOMIC disable as almost the
first thing during pci probe. That involves the use of
DISPLAY_VER() which is perhaps a bit sketchy now that we
may need to read that out from the hardware itself.
Looks like we do populate a default value for it anyway
so the current does at least still work.
But let's make this safer anyway and move the code
into intel_device_info_runtime_init() where we also
handle the same thing for the !HAS_DISPLAY case.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007211108.3883-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
It is fairly common for named video modes to contain dashes (e.g.
"tt-mid" on Atari, "dblntsc-ff" on Amiga). Currently such mode names
are not recognized, as the dash is considered to be a separator between
mode name and bpp.
Fix this by skipping any dashes that are not followed immediately by a
digit when looking for the separator.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-13-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Some video= options might have a value that contains a dash. However, the
command line parsing mode considers all dashes as the separator between the
mode and the bpp count.
Let's rework the parsing code a bit to only consider a dash as the bpp
separator if it before a comma, the options separator.
A follow-up patch will add a unit-test for this once such an option is
introduced.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-12-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
There is two TV subconnector related properties registered by
drm_mode_create_tv_properties(): subconnector and select subconnector.
While the select subconnector property is stored in the kernel by the
drm_tv_connector_state structure, the subconnector property isn't stored
anywhere.
Worse, the select subconnector property is stored in a field called
subconnector, creating some ambiguity about which property content we're
accessing.
Let's rename that field to one called select_subconnector to make it move
obvious what it's about.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-5-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
We currently have two sets of TV properties.
The first one is there to deal with analog TV properties, creating
properties such as the TV mode, subconnectors, saturation, hue and so on.
It's created by calling the drm_mode_create_tv_properties() function.
The second one is there to deal with properties that might be useful on a
TV, creating the overscan margins for example. It's created by calling the
drm_mode_create_tv_margin_properties().
However, we also have a drm_atomic_helper_connector_tv_reset() function
that will reset the TV margin properties to their default values, and thus
is supposed to be called for the latter set. This creates an ambiguity due
to the inconsistent naming.
We can thus rename the drm_atomic_helper_connector_tv_reset() function to
drm_atomic_helper_connector_tv_margins_reset() to remove that ambiguity
and hopefully make it more obvious.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-4-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The variable ret is being assigned with a value that is never read
both before and after a while-loop. The variable is being re-assigned
inside the while-loop and afterwards on the call to the function
i915_gem_object_lock_interruptible. Remove the redundants assignments.
Cleans up clang scan-build warnings:
warning: Although the value stored to 'ret' is used in the
enclosing expression, the value is never actually read
from 'ret' [deadcode.DeadStores]
warning: Value stored to 'ret' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007194745.2749277-1-colin.i.king@gmail.com
Patch which added graceful exit for non-persistent contexts missed the
fact it is not enough to set the exiting flag on a context and let the
backend handle it from there.
GuC backend cannot handle it because it runs independently in the
firmware and driver might not see the requests ever again. Patch also
missed the fact some usages of intel_context_is_banned in the GuC backend
needed replacing with newly introduced intel_context_is_schedulable.
Fix the first issue by calling into backend revoke when we know this is
the last chance to do it. Fix the second issue by replacing
intel_context_is_banned with intel_context_is_schedulable, which should
always be safe since latter is a superset of the former.
v2:
* Just call ce->ops->revoke unconditionally. (Andrzej)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 45c64ecf97 ("drm/i915: Improve user experience and driver robustness under SIGINT or similar")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: <stable@vger.kernel.org> # v6.0+
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003121630.694249-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 0add082ceb)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Rename the atomic helper function drm_atomic_helper_check_crtc_state()
to drm_atomic_helper_check_crtc_primary_plane() and only check for an
attached primary plane. Adapt callers.
Instead of having one big function to check for various CRTC state
conditions, we rather want smaller functions that drivers can pick
individually.
v5:
* rebase on top of udl changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-3-tzimmermann@suse.de
In drm_atomic_helper_check_crtc_state(), do not add a new plane state
to the global state if it does not exist already. Adding a new plane
state will result in overhead for the plane during the atomic-commit
step.
For the test in drm_atomic_helper_check_crtc_state() to succeed, it
is important that the CRTC has an enabled primary plane after the
commit. Simply testing the CRTC state's plane_mask for a primary plane
is sufficient.
Note that the helper still only tests for an attached primary plane.
Drivers have to ensure that the plane contains valid pixel information.
v5:
* fix commit description (Javier)
v3:
* test for a primary plane in plane_mask (Ville)
v2:
* remove unnecessary test for plane->crtc (Ville)
* inline drm_atomic_get_next_plane_state() (Ville)
* acquire plane lock before accessing plane->state (Ville)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: d6b9af1097 ("drm/atomic-helper: Add helper drm_atomic_helper_check_crtc_state()")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-2-tzimmermann@suse.de
Pull driver core updates from Greg KH:
"Here is the big set of driver core and debug printk changes for
6.1-rc1. Included in here is:
- dynamic debug updates for the core and the drm subsystem. The drm
changes have all been acked by the relevant maintainers
- kernfs fixes for syzbot reported problems
- kernfs refactors and updates for cgroup requirements
- magic number cleanups and removals from the kernel tree (they were
not being used and they really did not actually do anything)
- other tiny cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits)
docs: filesystems: sysfs: Make text and code for ->show() consistent
Documentation: NBD_REQUEST_MAGIC isn't a magic number
a.out: restore CMAGIC
device property: Add const qualifier to device_get_match_data() parameter
drm_print: add _ddebug descriptor to drm_*dbg prototypes
drm_print: prefer bare printk KERN_DEBUG on generic fn
drm_print: optimize drm_debug_enabled for jump-label
drm-print: add drm_dbg_driver to improve namespace symmetry
drm-print.h: include dyndbg header
drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
drm_print: interpose drm_*dbg with forwarding macros
drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
drm_print: condense enum drm_debug_category
debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops
driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()
Documentation: ENI155_MAGIC isn't a magic number
Documentation: NBD_REPLY_MAGIC isn't a magic number
nbd: remove define-only NBD_MAGIC, previously magic number
Documentation: FW_HEADER_MAGIC isn't a magic number
Documentation: EEPROM_MAGIC_VALUE isn't a magic number
...
We've excluded gmch platforms from writing the final watermarks
for any disabled pipe. IIRC the reason was perhaps some lingering
issue with the watermark merging across the pipes. But I can't
really see any reason for this anymore, so let's unify this behaviour.
The main benefit being more consistency in register dumps when
we don't have stale watermarks hanging around in the registers.
Functionally there should be no difference as the hardware just
ignore all of it when the pipe is disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622155452.32587-9-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
On g4x/vlv/chv the hardware seems incapable of changing the pixel
format, rotation, or YUV->RGB CSC matrix while in CxSR.
Additionally on VLV/CHV the sprites seem incapable of tiling
changes while in CxSR. On g4x CxSR is not even possible with
the sprite enabled. Curiously the primary plane seems perfectly
happy when changing tiling during CxSR.
Pimp up the code to account for these when determining whether
CxSR needs to be disabled. Since it looks like most of the plane
control register bits are affected let's just compare that.
But in the name of efficiency we'll make an exception for the
primary plane tiling changes (avoids some extra vblank waits).
v2: Just use the pre-computed plane control register values
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622155452.32587-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Pull drm fix from Dave Airlie:
"This reverts the patch I found with rough bisection to instability
around fences and the oops I got from netconsole.
sched:
- revert patch causing oopses"
* tag 'drm-next-2022-10-07-1' of git://anongit.freedesktop.org/drm/drm:
Revert "drm/sched: Use parent fence instead of finished"
Use a damage iterator to process damage areas individually. Merging
damage areas can result in large updates of unchanged framebuffer
regions. As USB is rather slow, it's better to process damage areas
individually and hence minimize USB-transfered data.
As part of the change, move drm_gem_fb_{begin,end}_cpu_access() into
the plane's atomic_update helper. To avoid overhead and intermediate
writers, we want to synchronize buffers and reserve access only once
before copying damage areas of the framebuffer.
v2:
* clarify commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-11-tzimmermann@suse.de
Replace simple-KMS helpers with regular atomic-modesetting helpers.
The simple-KMS helpers introduce a mid-layer abstraction without
added functionality. Using regular atomic helpers makes the driver's
implementation more discoverable and simplifies code sharing.
The conversion effectively open-codes the simple-KMS functions and
data structure within udl. No functional changes.
v2:
* don't use the atomic_disable plane helper
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-8-tzimmermann@suse.de
