If the GuC CTs are full and we need to stall the request submission
while waiting for space, we save the stalled request and where the stall
occurred; when the CTs have space again we pick up the request submission
from where we left off.
If a full GT reset occurs, the state of all contexts is cleared and all
non-guilty requests are unsubmitted, therefore we need to restart the
stalled request submission from scratch. To make sure that we do so,
clear the saved request after a reset.
Fixes note: the patch that introduced the bug is in 5.15, but no
officially supported platform had GuC submission enabled by default
in that kernel, so the backport to that particular version (and only
that one) can potentially be skipped.
Fixes: 925dc1cf58 ("drm/i915/guc: Implement GuC submission tasklet")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220811210812.3239621-1-daniele.ceraolospurio@intel.com
There was a size check to warn if the GuC error state capture buffer
allocation would be too small to fit a reasonable amount of capture
data for the current platform. Unfortunately, the test was done too
early in the boot sequence and was actually testing 'if(-ENODEV >
size)'.
Move the check to be later. The check is only used to print a warning
message, so it doesn't really matter how early or late it is done.
Note that it is not possible to dynamically size the buffer because
the allocation needs to be done before the engine information is
available (at least, it would be in the intended two-phase GuC init
process).
Now that the check works, it is reporting size too small for newer
platforms. The check includes a 3x oversample multiplier to allow for
multiple error captures to be bufferd by GuC before i915 has a chance
to read them out. This is less important than simply being big enough
to fit the first capture.
So a) bump the default size to be large enough for one capture minimum
and b) make the warning only if one capture won't fit, instead use a
notice for the 3x size.
Note that the size estimate is a worst case scenario. Actual captures
will likely be smaller.
Lastly, use drm_warn istead of DRM_WARN as the former provides more
infmration and the latter is deprecated.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-3-John.C.Harrison@Intel.com
Some additional MMIO tuning settings have appeared in the bspec's
performance tuning guide section.
One of the tuning settings here is also documented as formal workaround
Wa_22012654132 for some steppings of DG2. However the tuning setting
applies to all DG2 variants and steppings, making it a superset of the
workaround.
v2:
- Move DRAW_WATERMARK to engine workaround section. It only moves into
the engine context on future platforms. (Lucas)
- CHICKEN_RASTER_2 needs to be handled as a masked register. (Lucas)
Bspec: 68331
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816210601.2041572-2-matthew.d.roper@intel.com
The bspec performance tuning section gives recommended settings that the
driver should program for various MMIO registers. Although these
settings aren't "workarounds" we use the workaround infrastructure to do
this programming to make sure it is handled at the appropriate places
and doesn't conflict with any real workarounds.
Since more of these are starting to show up on recent platforms, it's a
good time to create a dedicated function to hold them so that there's
less ambiguity about how/where to implement new ones.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816210601.2041572-1-matthew.d.roper@intel.com
Implement functions to get and set GFXOFF's entry count and residency
for vangogh.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add debugfs interface to log GFXOFF statistics:
- Read amdgpu_gfxoff_count to get the total GFXOFF entry count at the
time of query since system power-up
- Write 1 to amdgpu_gfxoff_residency to start logging, and 0 to stop.
Read it to get average GFXOFF residency % multiplied by 100
during the last logging interval.
Both features are designed to be keep the values persistent between
suspends.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes five checkpatch warnings:
CHECK: Please don't use multiple blank lines
+
+
ERROR: Macros with complex values should be enclosed in parentheses
+#define MAX_I64 \
+ (int64_t)((1ULL << 63) - 1)
WARNING: Missing a blank line after declarations
+ struct bw_fixed res;
+ ASSERT(value < BW_FIXED_MAX_I32 && value > BW_FIXED_MIN_I32);
ERROR: that open brace { should be on the previous line
+ do
+ {
ERROR: that open brace { should be on the previous line
+ if (remainder >= arg2_value)
+ {
Signed-off-by: Tales Aparecida <tales.aparecida@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The definition of MIN_I64 in bw_fixed.c can cause gcc to whinge about
integer overflow, because it is treated as a positive value, which is
then negated. The temporary positive value is not necessarily
representable.
This causes the following warning:
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/calcs/bw_fixed.c:30:19:
warning: integer overflow in expression ‘-9223372036854775808’ of type
‘long long int’ results in ‘-9223372036854775808’ [-Woverflow]
30 | (int64_t)(-(1LL << 63))
| ^
Writing out (-MAX_I64 - 1) works instead.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Tales Aparecida <tales.aparecida@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have some old code associated with DML, which we had plans to use,
but at some point, we just moved away from it. This commit removes the
dml_wrapper* files since they are not used anymore.
Reported-by: Magali Lemes <magalilemes00@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The second jump table is required on live migration or mulitple VF
configuration on Aldebaran. With this implemented, the first level
jump table(hw used) will be same, mec fw internal will use the
second level jump table jump to the real functionality implementation.
so the different VF can load different version of MEC as long as
they support sjt
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we are using soc._clock_tmp[] to temporarily store and modify
data from soc.clock_limits[] before copying it back into
soc.clock_limits[] (because modifying data directly in
soc.clock_limits[] causes unintended behavior). However, this approach
has a number of downsides, such as:
1. struct _vcs_dpi_soc_bounding_box_st's creation/destruction
aren't well defined (which could mean more unintended
behavior).
2. Throwing "temp" varibles in structs everywhere doesn't make
for a particularly readable codebase.
For these reasons, we should get rid of soc._clock_tmp[] by defining a
struct scratch within struct dc that, contains within it all of the
temporary variables (including _clock_tmp[]) such that it is obvious how
they are intended to be used.
Co-authored-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we only attempt to setup DSC at the virtual DPCD port,
however many modern displays come with DSC support and MST hubs can now
support DSC pass-through. So, to more optimally make use of the
available bandwidth, use DSC pass-through when possible by adding DSC
pass-through enablement support into the DSC enable sequence.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a mode validation routine for DSC pass-through. Both the link from
source to hub, and the link from hub to monitor are checked, according
to the current link training result and full pbn returned by enum path
resource sideband message.
Pick up the minimum value as the bandwidth bottleneck for the end to
end link bandwidth constraint, and check if the maximum DSC decompression
bandwidth can fit.
v2: squash in DSC CONFIG_DRM_AMD_DC_DCN compilation fix (Hamza)
Co-authored-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, there is no way to identify if DSC pass-through can be
enabled and what aux DSC pass-through requests ought to be sent to. So,
add a variable to struct drm_dp_mst_port that keeps track of the
aforementioned information.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add details about color correction capabilities and explain a bit about
differences between DC hw generations and also how they are mapped
between DRM and DC interface. Two schemas for DCN 2.0 and 3.0 (converted
to svg from the original png) is included to illustrate it. They were
obtained from a discussion[1] in the amd-gfx mailing list.
[1] https://lore.kernel.org/amd-gfx/20220422142811.dm6vtk6v64jcwydk@mail.igalia.com/
v1:
- remove redundant comments (Harry)
- fix typos (Harry)
v2:
- reword introduction of color section
- add co-dev tag for Harry - who provided most of the info
- fix typos (Tales)
- describe missing struct parameters (Tales and Siqueira)
Co-developed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Tales Aparecida <tales.aparecida@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AMDGPU DM maps DRM color management properties (degamma, ctm and gamma)
to DC color correction entities. Part of this mapping is already
documented as code comments and can be converted as kernel docs.
v2:
- rebase to amd-staging-drm-next
- fix typos (Tales)
- undo kernel-docs inside functions (Tales)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tales Aparecida <tales.aparecida@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The timing programming inside DCN is far from trivial, it has multiple
parameters associated with that, and the lack of documentation does not
help comprehend this already complicated topic. This commit tries to
improve this situation by expanding the documentation of dc_crtc_timing
and the VTG program function.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are no backing hardware registers for ih_soft ring.
As a result, don't try to access hardware registers for read
and write pointers when processing interrupts on the IH soft
ring.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the DCN code, we can find some references to three different pipe
split policies but no clear description. This commit adds some
kernel-doc that explains more about these options and a little bit of
their impact.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In multi container use case, reset time is important, so skip ring
tests and cp halt wait during ip suspending for reset as they are
going to fail and cost more time on reset
v2: add a hang flag to indicate the reset comes from a job timeout,
skip ring test and cp halt wait in this case
v3: move hang flag to adev
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For some hang caused by slow tests, engine cannot be stopped which
may cause resume failure after reset. In this case, force halt
engine by reverting context addresses
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce amdgpu_reset_level debugfs in order to help debug and
test specific type of reset. Also helps blocking unwanted type of
resets.
By default, mode2 reset will not be enabled
v2: make this debugfs in adev and use debugfs_create_u32
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- introduce AMDGPU_SKIP_MODE2_RESET flag
- let mode2 reset fallback to default reset method if failed
v2: move this part out from the asic specific part
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To meet the requirement for multi container usecase which needs
a quicker reset and not causing VRAM lost, adding the Mode2
reset handler for sienna_cichlid.
v2: move skip mode2 flag part separately
v3: remove the use of asic_reset_res
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
For SubVP scaling cases, we must include the scaling
info as part of the cmd. This is required when converting
OTG line to HUBP line for the MALL_START_LINE programming.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no point in returning an int here. It only returns 0 which
the caller never uses. Therefore return void and remove the unnecessary
assignment.
Addresses-Coverity: 1504988 ("Unused value")
Fixes: 8da1170a16 ("drm/amdgpu: add VCN4 ip block support")
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Suggested-by: Ruijing Dong <ruijing.dong@amd.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Local variable 'rq' is initialized by an address
of field of drm_sched_job, so it does not make
sense to compare 'rq' with NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Andrey Strachuk <strochuk@ispras.ru>
Fixes: 7c6e68c777 ("drm/amdgpu: Avoid HW GPU reset for RAS.")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
