Mediatek DRM Next for Linux 5.20
1. Add Mediatek Soc DRM (vdosys0) support for mt8195
2. Cooperate with DSI RX devices to modify dsi funcs and delay mipi high to cooperate with panel sequence
3. Add mt8186 dsi compatible and convert dsi_dtbinding to .yaml
4. Add MediaTek SoC DRM (vdosys1) support for mt8195
5. Add MT8195 dp_intf driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fix drm_edid.h include]
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220709142021.24260-1-chunkuang.hu@kernel.org
drm/tegra: Changes for v5.20-rc1
The bulk of these changes adds support for context isolation for the
various supported host1x engines, as well as support for the hardware
found on the new Tegra234 SoC generation.
There's also a couple of fixes and cleanups. To round things off, the
device tree bindings are converted to the new json-schema format that
allows DTBs to be validated.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708181136.673789-1-thierry.reding@gmail.com
In exynos7_decon_resume, When it fails, we must use clk_disable_unprepare()
to free resource that have been used.
Fixes: 6f83d20838 ("drm/exynos: use DRM_DEV_ERROR to print out error
message")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jian Zhang <zhangjian210@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm-misc-next for $kernel-version:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
* crtc: Remove unnessary include statements from drm_crtc.h, plus
fallout in drivers
* edid: More use of struct drm_edid; implement HF-EEODB extension
Driver Changes:
* bridge:
* anx7625: Implement HDP timeout via callback; Cleanups
* fsl-ldb: Drop DE flip; Modesetting fixes
* imx: Depend on ARCH_MXC
* sil8620: Fix off-by-one
* ti-sn65dsi86: Convert to atomic modesetting
* ingenic: Fix display at maximum resolution
* panel:
* simple: Add support for HannStar HSD101PWW2, plus DT bindings; Add
support for ETML0700Y5DHA, plus DT bindings
* rockchip: Fixes
* vc4: Cleanups
* vmwgfx: Cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YsaHq1pvE699NtOM@linux-uq9g
Always run fbdev removal first to remove simpledrm via sysfb_disable().
This clears the internal state.
The later call to drm_aperture_detach_drivers() then does nothing.
Otherwise, with drm_aperture_detach_drivers() running first, the call to
sysfb_disable() uses inconsistent state.
Example backtrace show below:
BUG: KASAN: use-after-free in device_del+0x79/0x5f0
Read of size 8 at addr ffff888108185050 by task systemd-udevd/311
CPU: 0 PID: 311 Comm: systemd-udevd Tainted: G E 5.19.0-rc2-1-default+ #1689
Hardware name: HP ProLiant DL120 G7, BIOS J01 04/21/2011
Call Trace:
device_del+0x79/0x5f0
platform_device_del.part.0+0x19/0xe0
platform_device_unregister+0x1c/0x30
sysfb_disable+0x2d/0x70
remove_conflicting_framebuffers+0x1c/0xf0
remove_conflicting_pci_framebuffers+0x130/0x1a0
drm_aperture_remove_conflicting_pci_framebuffers+0x86/0xb0
mgag200_pci_probe+0x2d/0x140 [mgag200]
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 873eb3b118 ("fbdev: Disable sysfb device registration when removing conflicting FBs")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Changcheng Deng <deng.changcheng@zte.com.cn>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Use DEFINE_SIMPLE_DEV_PM_OPS() instead of the SIMPLE_DEV_PM_OPS()
macro. This makes it possible to remove the __maybe_unused flags on
the callback functions.
- Since we only have callbacks for suspend/resume, we can conditionally
compile the dev_pm_ops structure for when CONFIG_PM_SLEEP is enabled;
so use the pm_sleep_ptr() macro instead of pm_ptr().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708205406.96473-7-paul@crapouillou.net
As Rn covers single-channel formats with a direct relationship between
channel value and brightness, and Cn can be any colors, there are
currently no fourcc codes to describe single-channel formats with an
inverse relationship between channel value and brightness.
Introduce fourcc codes for a single-channel frame buffer format with
two, four, sixteen, or 256 brightness ("darkness") levels, where there
is an inverse relationship between channel value and brightness.
As the number of bits per pixel may be less than eight, some of these
formats rely on proper block handling for the calculation of bits per
pixel and pitch.
The fill order (the order in which multiple pixels are packed in a byte)
is the same order as used for grayscale (2, 4, and 16 levels) images in
the PNG specification, Version 1.2.
This order is also the recommended and default order (FillOrder = 1) for
bilevel and grayscale (16 levels) images in the TIFF 6.0 Specification,
and is also used for monochrome images in the PBM file format,
monochrome Linux frame buffer logos, and BDF and PSF (Linux kernel) font
files.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/6119f3abeda9baaa88652843960adc032da276b4.1657294931.git.geert@linux-m68k.org
Introduce fourcc codes for single-channel frame buffer formats with two,
four, and sixteen brightness levels, where there is a direct
relationship between channel value and brightness.
As the number of bits per pixel is less than eight, these rely on proper
block handling for the calculation of bits per pixel and pitch.
The fill order (the order in which multiple pixels are packed in a byte)
is the same order as used for grayscale (2, 4, and 16 levels) images in
the PNG specification, Version 1.2.
This order is also the recommended and default order (FillOrder = 1) for
bilevel and grayscale (16 levels) images in the TIFF 6.0 Specification,
and is also used for monochrome images in the PBM file format,
monochrome Linux frame buffer logos, and BDF and PSF (Linux kernel) font
files.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/96561a88e53c59cac72e66642bf4c097aacefd18.1657294931.git.geert@linux-m68k.org
Add support for color-indexed frame buffer formats with two, four, and
sixteen colors to the DRM framebuffer helper functions:
1. Add support for 1, 2, and 4 bits per pixel to the damage helper,
2. For color-indexed modes, the length of the color bitfields must be
set to the color depth, else the logo code may pick a logo with too
many colors. Drop the incorrect DAC width comment, which
originates from the i915 driver.
3. Accept C[124] modes when validating or filling in struct
fb_var_screeninfo, and use the correct number of bits per pixel.
4. Set the visual to FB_VISUAL_PSEUDOCOLOR for all color-indexed
modes.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/db3e80b445df661ff0cd7e698507a8d24a4c867e.1657294931.git.geert@linux-m68k.org
Introduce fourcc codes for color-indexed frame buffer formats with two,
four, and sixteen colors, and provide a mapping from bits per pixel and
depth to fourcc codes.
As the number of bits per pixel is less than eight, these rely on proper
block handling for the calculation of bits per pixel and pitch.
The fill order (the order in which multiple pixels are packed in a byte)
is the same order as used for indexed-color (2, 4, and 16 colors) images
in the PNG specification, Version 1.2.
This order is also the recommended and default order (FillOrder = 1) for
palette-color (16 colors) images in the TIFF 6.0 Specification, and is
also used for 16-color Linux frame buffer logos.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/3d88ca7ad32ff3ff3469c10f0b36c312ea233a33.1657294931.git.geert@linux-m68k.org
For some cases (accessing registers, unmap legacy queue), it needs
access mes in atomic context. Use spinlock to protect agaist mes
ring buffer race condition.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Output Data Mapping is a power saving feature that allows us to run at
reduced DPP and DISP clocks compared to what could be achieved with a
single pipe.
Set the default policy for single display use case to use 2 to 1 ODM combine.
The options are queried by DC and appropriate register programming sequence
is initiated to enable this feature.
Fixes: 235c676342 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
