Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
Pull tasklets API update from Kees Cook:
"These are the infrastructure updates needed to support converting the
tasklet API to something more modern (and hopefully for removal
further down the road).
There is a 300-patch series waiting in the wings to get set out to
subsystem maintainers, but these changes need to be present in the
kernel first. Since this has some treewide changes, I carried this
series for -next instead of paining Thomas with it in -tip, but it's
got his Ack.
This is similar to the timer_struct modernization from a while back,
but not nearly as messy (I hope). :)
- Prepare for tasklet API modernization (Romain Perier, Allen Pais,
Kees Cook)"
* tag 'tasklets-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
tasklet: Introduce new initialization API
treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD()
usb: gadget: udc: Avoid tasklet passing a global
This converts all the existing DECLARE_TASKLET() (and ...DISABLED)
macros with DECLARE_TASKLET_OLD() in preparation for refactoring the
tasklet callback type. All existing DECLARE_TASKLET() users had a "0"
data argument, it has been removed here as well.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull staging driver fixes from Greg KH:
"Five small staging driver fixes for 5.8-rc7 to resolve some reported
problems:
- four comedi driver fixes for problems found with them
- a syzbot-found fix for the wlang-ng driver that resolves a much
reported problem.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: wlan-ng: properly check endpoint types
staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull media fixes from Mauro Carvalho Chehab:
"A series of fixes for the upcoming atomisp driver. They solve issues
when probing atomisp on devices with multiple cameras and get rid of
warnings when built with W=1.
The diffstat is a bit long, as this driver has several abstractions.
The patches that solved the issues with W=1 had to get rid of some
duplicated code (there used to have 2 versions of the same code, one
for ISP2401 and another one for ISP2400).
As this driver is not in 5.7, such changes won't cause regressions"
* tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (38 commits)
Revert "media: atomisp: keep the ISP powered on when setting it"
media: atomisp: fix mask and shift operation on ISPSSPM0
media: atomisp: move system_local consts into a C file
media: atomisp: get rid of version-specific system_local.h
media: atomisp: move global stuff into a common header
media: atomisp: remove non-used 32-bits consts at system_local
media: atomisp: get rid of some unused static vars
media: atomisp: Fix error code in ov5693_probe()
media: atomisp: Replace trace_printk by pr_info
media: atomisp: Fix __func__ style warnings
media: atomisp: fix help message for ISP2401 selection
media: atomisp: i2c: atomisp-ov2680.c: fixed a brace coding style issue.
media: atomisp: make const arrays static, makes object smaller
media: atomisp: Clean up non-existing folders from Makefile
media: atomisp: Get rid of ACPI specifics in gmin_subdev_add()
media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add()
media: atomisp: Use temporary variable for device in gmin_subdev_add()
media: atomisp: Refactor PMIC detection to a separate function
media: atomisp: Deduplicate return ret in gmin_i2c_write()
media: atomisp: Make pointer to PMIC client global
...
Kalle Valo says:
====================
wireless-drivers-next patches for v5.9
First set of patches for v5.9. This comes later than usual as I was
offline for two weeks. The biggest change here is moving Microchip
wilc1000 driver from staging. There was an immutable topic branch with
one commit moving the whole driver and the topic branch was pulled
both to staging-next and wireless-drivers-next. At the moment the only
reported conflict is in MAINTAINERS file, so I'm hoping the move
should go smoothly.
Other notable changes are ath11k getting 6 GHz band support and rtw88
supporting RTL8821CE. And there's also the usual fixes, API changes
and cleanups all over.
Major changes:
wilc1000
* move from drivers/staging to drivers/net/wireless/microchip
ath11k
* add 6G band support
* add spectral scan support
iwlwifi
* make FW reconfiguration quieter by not using warn level
rtw88
* add support for RTL8821CE
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this.
Fixes: 1e15687ea4 ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions")
Cc: <stable@vger.kernel.org> #3.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-4-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this, adjusting the checks
for invalid channels so that enabled channel bits that would have been
lost by shifting are also checked for validity. Only channels 0 to 15
are valid.
Fixes: a8c66b684e ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions")
Cc: <stable@vger.kernel.org> #4.0+: ef75e14a6c: staging: comedi: verify array index is correct before using it
Cc: <stable@vger.kernel.org> #4.0+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-5-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this.
Fixes: 33cdce6293 ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG")
Cc: <stable@vger.kernel.org> #3.8+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`ni6527_intr_insn_config()` processes `INSN_CONFIG` comedi instructions
for the "interrupt" subdevice. When `data[0]` is
`INSN_CONFIG_DIGITAL_TRIG` it is configuring the digital trigger. When
`data[2]` is `COMEDI_DIGITAL_TRIG_ENABLE_EDGES` it is configuring rising
and falling edge detection for the digital trigger, using a base channel
number (or shift amount) in `data[3]`, a rising edge bitmask in
`data[4]` and falling edge bitmask in `data[5]`.
If the base channel number (shift amount) is greater than or equal to
the number of channels (24) of the digital input subdevice, there are no
changes to the rising and falling edges, so the mask of channels to be
changed can be set to 0, otherwise the mask of channels to be changed,
and the rising and falling edge bitmasks are shifted by the base channel
number before calling `ni6527_set_edge_detection()` to change the
appropriate registers. Unfortunately, the code is comparing the base
channel (shift amount) to the interrupt subdevice's number of channels
(1) instead of the digital input subdevice's number of channels (24).
Fix it by comparing to 32 because all shift amounts for an `unsigned
int` must be less than that and everything from bit 24 upwards is
ignored by `ni6527_set_edge_detection()` anyway.
Fixes: 110f9e687c ("staging: comedi: ni_6527: support INSN_CONFIG_DIGITAL_TRIG")
Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
changeset d0213061a501 ("media: atomisp: fix mask and shift operation on ISPSSPM0")
solved the existing issue with the IUNIT power on code.
So, the driver can now use the right code again.
This reverts commit 95d1f398c4.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the check on bits 25:24 on ISPSSPM0 is always 0 because
the mask and shift operations are incorrect. Fix this by shifting
by MRFLD_ISPSSPM0_ISPSSS_OFFSET (24 bits right) and then masking
with RFLD_ISPSSPM0_ISPSSC_MASK (0x03) to get the appropriate 2 bits
to check.
Addresses-Coverity: ("Operands don't affect result")
Fixes: 0f441fd70b ("media: atomisp: simplify the power down/up code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of declaring all those consts everywhere when the
headers are included, just place them on a single place.
This change shuts up lots of warnings when built with W=1:
In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23,
from drivers/staging/media/atomisp/pci/ia_css.h:26,
from drivers/staging/media/atomisp/pci/atomisp_compat_css20.h:24,
from drivers/staging/media/atomisp/pci/atomisp_compat.h:22,
from drivers/staging/media/atomisp/pci/atomisp_drvfs.c:23:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23,
from drivers/staging/media/atomisp/pci/ia_css.h:26,
from drivers/staging/media/atomisp/pci/atomisp_file.c:27:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23,
from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29,
from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23,
from drivers/staging/media/atomisp/pci/atomisp_internal.h:34,
from drivers/staging/media/atomisp/pci/atomisp_cmd.h:30,
from drivers/staging/media/atomisp/pci/atomisp_csi2.c:21:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23,
from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29,
from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23,
from drivers/staging/media/atomisp/pci/atomisp_internal.h:34,
from drivers/staging/media/atomisp/pci/atomisp_acc.h:23,
from drivers/staging/media/atomisp/pci/atomisp_acc.c:29:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
After removing the unused 32-bits data, the isp2401_system_local.h
now contains everything that it is needed, either by isp2401 or
by isp2400.
So, remove code duplication.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Right now, there are two versions of system_global.h headers.
Both share a lot of common code. There are some ISP2401 specific
types on one of the headers, but it doesn't conflict with the
ISP2400 ones.
Also, the common code is identical.
So, remove code duplication by moving such code into a
common header.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is an abstraction at the code in order to support
32 or 64 bits address/data length. However, for all
Atom chipsets supported by this version, the size is fixed.
So, cleanup the mess, removing the uused code and placing
the data sizes on a single place.
The end goal is to completely remove those local/global
headers, replacing them by some ISP-version dependent struct,
in order for the driver to decide what version it would need
in runtime.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several static vars declared inside the
system local headers. This causes lots of warnings when W=1.
Remove the unused ones.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If gmin_camera_platform_data() returns NULL then we should return a
negative error instead of success.
Fixes: 90ebe55ab8 ("media: staging: atomisp: Add driver prefix to Kconfig option and module names")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch fixes the checkpatch.pl warning:
Prefer using '"%s...", __func__' to using '<function name>',
this function's name, in a string
Signed-off-by: Baidyanath Kundu <kundubaidya99@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
I'm pretty sure I named this right, but it sounds that I ended
doing something weird maybe while solving some conflict.
So, fix the title of this config var.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Don't populate const arrays on the stack but instead make them
static. Makes the object code smaller by 150 bytes.
Before:
text data bss dec hex filename
111083 23692 64 134839 20eb7 atomisp/pci/atomisp_compat_css20.o
After:
text data bss dec hex filename
110773 23852 64 134689 20e21 atomisp/pci/atomisp_compat_css20.o
After:
(gcc version 9.3.0, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Compiler is not happy about leftovers:
cc1: warning: .../pci/hrt/: No such file or directory [-Wmissing-include-dirs]
cc1: warning: .../pci/hive_isp_css_include/memory_access/: No such file or directory [-Wmissing-include-dirs]
cc1: warning: .../pci/css_2400_system/hrt/: No such file or directory [-Wmissing-include-dirs]
Drop them from Makefile.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
First of all ACPI HID is a part of the device name which is printed
as a part of the dev_info(dev, ...); line. Second, since the only BID
is left, it's a part of ACPI path, which can be printed via %pfw.
Besides that, drop ACPI handle from atomisp_get_acpi_power() parameters.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use temporary variable for device in gmin_subdev_add().
While here, drop unused temporary variable for device in other places.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Refactor PMIC detection to a separate function. In the future
we may move this code somewhere else where it's more suitable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Deduplicate return ret in gmin_i2c_write().
While here, replace 'Kernel' by 'kernel' in the message and
reduce amount of LOCs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When we enumerate second device when PMIC has been successfully detected
to AXP, we got into troubles dereferencing NULL pointer. It seems
we have to detect PMIC only once because pmic_id is a global variable
and code doesn't expect the change of it: Two PMICs on one platform?
It's impossible.
Crash excerpt:
[ 34.335237] BUG: kernel NULL pointer dereference, address: 0000000000000002
...
[ 35.652036] RIP: 0010:gmin_subdev_add.cold+0x32f/0x33e [atomisp_gmin_platform]
So, as a quick fix make power a global variable. In next patches we move
PMIC detection to be more independent from subdevices.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are devices with completely different _DSM() format,
and accessing object as a package leads to crashes.
Bail out in the case of unexpected object type.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Unify pdev to be pointer to struct pci_device.
While here, reindent some (touched) lines for better readability.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
struct atomisp device has struct device and struct pci_dev pointers
which are basically duplicates of each other. Drop the latter
in favour of the former.
While here, unify pdev to be pointer to struct pci_device and reindent
some (touched) lines for better readability.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is no need to pass a pointer to struct device_driver
when we have an access to struct device already.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are specific ACPI and I\xB2C APIs to match device by different
parameters, such as ACPI HID, and retrieve an I\xB2C client.
Use them instead of home grown approach.
Note, it fixes a resource leak as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
IOSF MBI header contains a lot of definitions, such as
end point addresses of IPs. Move CCK address from AtomISP driver
to generic header.
While here, drop unused one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of parsing GPIO for two exceptions inside the logic
which would be trying to use the GPIO, move the init code
to the routine which adds a new gmin device.
Move the notes to it too, as this helps to identify where
those two GPIO settings are used, explaining why they're
defaulting to -1 when not found.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's only one place where a subdev can be added: when the
sensor driver registers it. Trying to do it elsewhere will
cause problems, as the detection code needs to access the
I2C bus in order to probe some things.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If the ACPI DSDT tables provide _CRS for the camera, the
GPIO core code should be able to handle them automatically.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The media core has now a check if fi->pad is bigger than zero
or bigger than sd->entity.num_pads, if the media controller
is defined.
This causes a call to g_frame_interval to return -EINVAL.
Fix it by first cleaning up the struct.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Newer devices don't place the PMIC CLK line inside an EFI
var. Instead, those are found at the _PR0 table.
Add a parser for it, using info stored via the DSDT table.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support code for this driver to use ACPI power management.
Yet, at least with known devices, this won't work without
further changes.
The rationale is that the ACPI handling code checks for the _PR? tables
in order to know what is required to switch the device from power state
D0 (_PR0) up to D3COLD (_PR3).
The adev->flags.power_manageable is set to true if the device has a _PR0
table, which can be checked by calling acpi_device_power_manageable(adev).
However, this only says that the device can be set to power off mode.
At least on the DSDT tables we've seen so far, there's no _PR3 nor _PS3
(which would have a somewhat similar effect).
So, using ACPI for power management won't work, except if adding
an ACPI override logic somewhere.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The gmin_subdev_add() currently doesn't use ACPI device
power management. In order to prepare for adding support
for it, let's shift some things, placing the PM-related
stuff at the end of the probing logic.
Let's also store the current gs on a temporary var, in
order to simplify the source code.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
