The address bus on Agilex5 is limited to 40 bits. When SMMU is enable this
will cause address truncation and translation faults. Hence introducing
"altr,agilex5-axi-dma" to enable platform specific configuration to
configure the dma addressable bit mask.
Add a fallback capability for the compatible property to allow driver to
probe and initialize with a newly added compatible string without requiring
additional entry in the driver.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/dbc775f114445c06c6e4ce424333e1f3cbb92583.1766966955.git.khairul.anuar.romli@altera.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Agilex5 integrates an ARM SMMU v3 (System Memory Management Unit) with
dedicated Translation Buffer Units (TBUs) assigned to various peripherals,
including the Synopsys DesignWare AXI DMA controller.
Each TBU handles address translation for its associated device by mapping
stream IDs to memory access permissions and virtual-to-physical address
mappings via the SMMU core.
The DesignWare AXI DMAC instances on Agilex5 are connected to their
respective TBUs. These TBUs forward DMA transactions from the controller
through the SMMU, enabling IOMMU-based features such as:
- Address translation for DMA operations
- Isolation and protection of memory regions accessed by the DMA controller
- Support for secure and virtualized environments through enforced access
control
To support this configuration, the `iommus` property must be added to the
binding schema for `snps,dw-axi-dmac`. This allows the device tree to
associate each DMA controller with the correct SMMU stream ID, enabling
the Linux IOMMU framework to configure translation contexts at runtime.
This change documents the IOMMU support for the DMA controller on Agilex5
and allows proper integration with the SMMUv3 hardware.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
A RISC-V platform can have both DMA coherent/noncoherent devices.
Since the RISC-V architecture is marked coherent, devices should
be marked as noncoherent when coherent devices exist.
Add dma-noncoherent property for snps,dw-axi-dmac device. It will
be used on SG2044, and it has other coherent devices.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250303065649.937233-1-inochiama@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
"make dtbs_check":
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
arch/riscv/boot/dts/canaan/sipeed_maix_bit.dt.yaml: dma-controller@50000000: 'resets' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
The Synopsys DesignWare AXI DMA Controller on the Canaan K210 SoC
exposes its reset signal.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20211125152008.162571-1-geert@linux-m68k.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
