Send unload command to smu during modprobe -r amdgpu for smu 13/14.
1. This can fix the high voltage/temperatue issue after driver is unloaded.
2. Reloading driver could fail but with the debug port based mode1 reset
during driver is reloaded, it is good and safe.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_ib_schedule() returns early after calling amdgpu_ring_undo().
This skips the common free_fence cleanup path. Other error paths were
already changed to use goto free_fence, but this one was missed.
Change the early return to goto free_fence so all error paths clean up
the same way.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c:232 amdgpu_ib_schedule()
warn: missing unwind goto?
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
124 int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned int num_ibs,
125 struct amdgpu_ib *ibs, struct amdgpu_job *job,
126 struct dma_fence **f)
127 {
...
224
225 if (ring->funcs->insert_start)
226 ring->funcs->insert_start(ring);
227
228 if (job) {
229 r = amdgpu_vm_flush(ring, job, need_pipe_sync);
230 if (r) {
231 amdgpu_ring_undo(ring);
--> 232 return r;
The patch changed the other error paths to goto free_fence but
this one was accidentally skipped.
233 }
234 }
235
236 amdgpu_ring_ib_begin(ring);
...
338
339 free_fence:
340 if (!job)
341 kfree(af);
342 return r;
343 }
Fixes: f903b85ed0 ("drm/amdgpu: fix possible fence leaks from job structure")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
Firmware and monitoring tools may not be ready to receive a CPER when we
read the bad pages, so send the CPERs at the end of RAS initialization
to ensure that the FW is ready to receive and process the CPER. This
removes the previous CPER submission that was added during bad page
load, and sends both in-band and out-of-band at the same time.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The commit 6a23e7b433 ("drm/amd: Clean up kfd node on surprise
disconnect") introduced early KFD cleanup when drm_dev_is_unplugged()
returns true. However, this causes hangs during normal module unload
(rmmod amdgpu).
The issue occurs because drm_dev_unplug() is called in amdgpu_pci_remove()
for all removal scenarios, not just surprise disconnects. This was done
intentionally in commit 39934d3ed5 ("Revert "drm/amdgpu: TA unload
messages are not actually sent to psp when amdgpu is uninstalled"") to
fix IGT PCI software unplug test failures. As a result,
drm_dev_is_unplugged() returns true even during normal module unload,
triggering the early KFD cleanup inappropriately.
The correct check should distinguish between:
- Actual surprise disconnect (eGPU unplugged): pci_dev_is_disconnected()
returns true
- Normal module unload (rmmod): pci_dev_is_disconnected() returns false
Replace drm_dev_is_unplugged() with pci_dev_is_disconnected() to ensure
the early cleanup only happens during true hardware disconnect events.
Cc: stable@vger.kernel.org
Reported-by: Cal Peake <cp@absolutedigital.net>
Closes: https://lore.kernel.org/all/b0c22deb-c0fa-3343-33cf-fd9a77d7db99@absolutedigital.net/
Fixes: 6a23e7b433 ("drm/amd: Clean up kfd node on surprise disconnect")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Returning DRM_GPU_SCHED_STAT_NO_HANG causes the scheduler
to add the bad job back the pending list. We've already
set the errors on the fence and killed the bad job at this point
so it's the correct behavior.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sdma ring reset is not supported in SRIOV. kfd driver does not check
reset mask, and could queue sdma ring reset during unmap_queues_cpsch.
Avoid the ring reset for sriov.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Regardless if CPU enable 5-level paging, GPU vm use 5-level paging if
gmc init with 57-bit address space support, because
ARM64 4-level paging support 48-bit VA, x86 and GPU 4-level paging
support 47-bit VA, require 5-level paging on GPU to support ARM64.
NPA address space 52-bit mapping on NPA GPU VM require 5-level paging.
Debugger trap get device snapshot expect LDS and Scratch base, limit
above 57-bit, which is set only for 5-level paging.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.19.x
There is no firmware version dependency. This also
enables sdma queue resets on all SDMA 6.x based
chips.
Fixes: 59fd50b866 ("drm/amdgpu: Add sysfs interface for sdma reset mask")
Cc: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no firmware version dependency. This also
enables sdma queue resets on all SDMA 5.2.x based
chips.
Fixes: 59fd50b866 ("drm/amdgpu: Add sysfs interface for sdma reset mask")
Cc: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When amdgpu_nbio_ras_sw_init() fails in amdgpu_ras_init(), the function
returns directly without freeing the allocated con structure, leading
to a memory leak.
Fix this by jumping to the release_con label to properly clean up the
allocated memory before returning the error code.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: fdc94d3a8c ("drm/amdgpu: Rework pcie_bif ras sw_init")
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_discovery_get_nps_info() internally allocates memory for ranges
using kvcalloc(), which may use vmalloc() for large allocation. Using
kfree() to release vmalloc memory will lead to a memory corruption.
Use kvfree() to safely handle both kmalloc and vmalloc allocations.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: b194d21b9b ("drm/amdgpu: Use NPS ranges from discovery table")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_acpi_enumerate_xcc(), if amdgpu_acpi_dev_init() returns -ENOMEM,
the function returns directly without releasing the allocated xcc_info,
resulting in a memory leak.
Fix this by ensuring that xcc_info is properly freed in the error paths.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 4d5275ab0b ("drm/amdgpu: Add parsing of acpi xcc objects")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If amdgpu_amdkfd_gpuvm_free_memory_of_gpu() fails after kgd_mem is
removed from validate_list, the mem handle still lingers in the KFD idr.
This means when process is terminated,
kfd_process_free_outstanding_kfd_bos() will call
amdgpu_amdkfd_gpuvm_free_memory_of_gpu() again resulting in double
deletion.
To avoid this -
(a) Check if list is empty before deleting it
(b) Rearragne amdgpu_amdkfd_gpuvm_free_memory_of_gpu() such that it can
be safely called again if it returns failure the first time.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6ba60345f4)
If amdgpu_amdkfd_gpuvm_free_memory_of_gpu() fails after kgd_mem is
removed from validate_list, the mem handle still lingers in the KFD idr.
This means when process is terminated,
kfd_process_free_outstanding_kfd_bos() will call
amdgpu_amdkfd_gpuvm_free_memory_of_gpu() again resulting in double
deletion.
To avoid this -
(a) Check if list is empty before deleting it
(b) Rearragne amdgpu_amdkfd_gpuvm_free_memory_of_gpu() such that it can
be safely called again if it returns failure the first time.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The return code of a non void function should not be ignored. In cases
where we do not care, the code needs to suppress it.
Signed-off-by: Andrew Martin <andrew.martin@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a full memory barrier after clearing no_hw_access in
amdgpu_device_mode1_reset() so subsequent PCI state restore
access cannot observe stale state on other CPUs.
Fixes: 7edb503fe4 ("drm/amd/pm: Disable MMIO access during SMU Mode 1 reset")
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. Align with gfx11.
v2: preserve init and remap for MMIO case.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES FW uses address(mqd_addr + sizeof(struct mqd) + 3*sizeof(uint32_t))
as fence address and writes a 32 bit fence value to this address. Driver
needs to allocate some extra memory(at least 4 DWs) in addition to
sizeof(struct mqd) as mqd memory(limited to gfx/compute/sdma queue).
For gfx11/12, sizeof(struct mqd) < PAGE_SIZE, KGD allocates mqd memory with
PAGE_SIZE aligned works. For gfx12.1, sizeof(struct mqd) == PAGE_SIZE,
it doesn't work.
KFD mqd manager hardcodes mqd size to PAGE_SIZE/MQD_SIZE across different
IP versions to solve this issue.
To avoid hardcoding in differnet places and across different IP versions.
Let's use AMDGPU_MQD_SIZE_ALIGN instead. It is used in two places.
1. mqd memory alloction
2. mqd stride handling for multi xcc config
v2: Use AMDGPU_GPU_PAGE_ALIGN. (Mukul)
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: David Belanger <david.belanger@amd.com> (v1)
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add validation to ensure user queue sizes meet hardware requirements:
- Size must be a power of two for efficient ring buffer wrapping
- Size must be at least AMDGPU_GPU_PAGE_SIZE to prevent undersized allocations
This prevents invalid configurations that could lead to GPU faults or
unexpected behavior.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The EXEC_COUNT field must be > 0. In the gfx shadow
handling we always emit a cond_exec packet after the gfx_shadow
packet, but the EXEC_COUNT never gets patched. This leads
to a hang when we try and reset queues on gfx11 APUs.
Fixes: c68cbbfd54 ("drm/amdgpu: cleanup conditional execution")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
