Currently, GPU resets can now be performed successfully on the Raven
series. While GPU reset is required for the S3 suspend abort case.
So now can enable gpu reset for S3 abort cases on the Raven series.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check amdgpu_ras_mask to fix ineffective ras_mask setting
due to special asic without sram ecc enable but with poison
supported.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If fatal error is detected, packet submission won't go through. Return
error in such cases. Also, avoid waiting for fence when fatal error is
detected.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For a RAS error that needs a full reset to recover, set the fatal error
status. Clear the status once the device is reset.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't set power state flag when system enter runtime suspend,
or it may cause runtime resume failure issue.
Fixes: 3a9626c816 ("drm/amd: Stop evicting resources on APUs in suspend")
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm-misc-next for v6.9:
UAPI Changes:
- changes to fdinfo stats
Cross-subsystem Changes:
agp:
- remove unused type field from struct agp_bridge_data
Core Changes:
ci:
- update test names
- cleanups
gem:
- add stats for shared buffers plus updates to amdgpu, i915, xe
Documentation:
- fixes
syncobj:
- fixes to waiting and sleeping
Driver Changes:
bridge:
- adv7511: fix crash on irq during probe
- dw_hdmi: set bridge type
host1x:
- cleanups
ivpu:
- updates to firmware API
- refactor BO allocation
meson:
- fix error handling in probe
panel:
- revert "drm/panel-edp: Add auo_b116xa3_mode"
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
renesas:
- add RZ/G2L DU support plus DT bindings
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222135841.GA6677@localhost.localdomain
Convert open coded RMW accesses for LNKCTL2 to use
pcie_capability_clear_and_set_word() which makes its easier to
understand what the code tries to do.
LNKCTL2 is not really owned by any driver because it is a collection of
control bits that PCI core might need to touch. RMW accessors already
have support for proper locking for a selected set of registers
(LNKCTL2 is not yet among them but likely will be in the future) to
avoid losing concurrent updates.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under SRIOV, programming to VM_CONTEXT*_CNTL regs failed because the
current macro does not pass through the correct xcc instance.
Use the *REG32_XCC macro in this case.
The behaviour without SRIOV is the same without this patch.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Zhigang Luo <Zhigang.Luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current error detection only looks for a timeout.
This should be changed to also check scratch_reg1 for any errors
returned from RLCG.
v2: remove new error value
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable clock gating and power gating for now.
v2: squash in revision fix (Alex)
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch to add MMHUB 3.3.1 support.
v2: squash in fault info fix (Alex)
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
jpeg_v4_0_5_start_dpg_mode() always returns 0 and the return value
doesn't get used in the caller jpeg_v4_0_5_start(). Modify the
function to be void.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1583635 ("Code maintainability issues")
Fixes: 0a119d53f7 ("drm/amdgpu/jpeg: add support for jpeg DPG mode")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rectifies kdoc warnings related to the 'ih' parameter in the
'ih_v7_0_get_wptr', 'ih_v7_0_irq_rearm', and 'ih_v7_0_set_rptr'
functions within the 'ih_v7_0.c' file.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/ih_v7_0.c:392: warning: Function parameter or member 'ih' not described in 'ih_v7_0_get_wptr'
drivers/gpu/drm/amd/amdgpu/ih_v7_0.c:432: warning: Function parameter or member 'ih' not described in 'ih_v7_0_irq_rearm'
drivers/gpu/drm/amd/amdgpu/ih_v7_0.c:458: warning: Function parameter or member 'ih' not described in 'ih_v7_0_set_rptr'
Fixes: 12443fc53e ("drm/amdgpu: Add ih v7_0 ip block support")
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
