The ASICREV_IS_BEIGE_GOBY_P check always took precedence, because it includes all chip revisions upto NV_UNKNOWN.
Fixes: 54b822b3ea ("drm/amd/display: Use dce_version instead of chip_id")
Signed-off-by: Andy Nguyen <theofficialflow1996@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9c7be0efa6)
[Why]
The dcn32_override_min_req_memclk function is in dcn32_fpu.c, which is
compiled with CC_FLAGS_FPU into FP instructions. So when we call it we
must use DC_FP_{START,END} to save and restore the FP context, and
prepare the FP unit on architectures like LoongArch where the FP unit
isn't always on.
Reported-by: LiarOnce <liaronce@hotmail.com>
Fixes: ee7be8f3de ("drm/amd/display: Limit DCN32 8 channel or less parts to DPM1 for FPO")
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 25bb1d54ba)
Cc: stable@vger.kernel.org
[WHY]
On DCN21, dccg2_init() is called in dcn10_init_hw() before
bios_golden_init(). During S0i3 resume, BIOS sets MICROSECOND_TIME_BASE_DIV
to 0x00120464 as a marker. dccg2_init() overwrites this to 0x00120264,
causing dcn21_s0i3_golden_init_wa() to misdetect the state and skip golden
init.
Eventually during the resume sequence, a flip timeout occurs.
[HOW]
Skip DCCG on dccg2_is_s0i3_golden_init_wa_done() on DCN21.
Fixes: 4c595e7511 ("drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c61eda4343)
Commit 4c595e7511 ("drm/amd/display: Migrate DCCG registers access
from hwseq to dccg component.") moved register writes from hwseq to
dccg2_*() functions but did not add the registers to the DCCG register
list macros. The struct fields default to 0, so REG_WRITE() targets
MMIO offset 0, causing a GPU hang on resume (seen on DCN21/DCN30
during IGT kms_cursor_crc@cursor-suspend).
Add
- MICROSECOND_TIME_BASE_DIV
- MILLISECOND_TIME_BASE_DIV
- DCCG_GATE_DISABLE_CNTL
- DCCG_GATE_DISABLE_CNTL2
- DC_MEM_GLOBAL_PWR_REQ_CNTL
to macros in dcn20_dccg.h, dcn301_dccg.h, dcn31_dccg.h, and dcn314_dccg.h.
Fixes: 4c595e7511 ("drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.")
Reported-by: Rafael Passos <rafael@rcpassos.me>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e6e2b956fc)
This can be called while preemption is disabled, for example by
dcn32_internal_validate_bw which is called with the FPU active.
Fixes "BUG: scheduling while atomic" messages I encounter on my Navi31
machine.
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b42dae2ebc)
Cc: stable@vger.kernel.org
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Ensure that the DAC output is enabled at the correct time by
moving it to the DCE link encoder similarly to how digital
outputs are enabled.
This also removes the call to DAC1EncoderControl from the DCE
HWSS, which always felt like it was a hacky solution.
Fixes: 0fbe321a93 ("drm/amd/display: Implement DCE analog link encoders (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apparently the VBIOS SelectCRTC_Source function overwrites
a few registers (such as FMT_*) which DC writes in a different
place, which can cause problems.
Instead of using the SelectCRTC_Source function from the
VBIOS, use the DAC_SOURCE_SELECT register directly, similarly
to how it is done for digital link encoders.
Fixes: 3be26d81b1 ("drm/amd/display: Support DAC in dce110_hwseq")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VBIOS DAC1EncoderControl() function can initialize the DAC,
by writing board-specific values to certain registers.
Call this at link encoder hardware initialization time similarly
to how the equivalent UNIPHYTransmitterControl initialization
is done.
This fixes DAC output on the Radeon HD 7790.
Also remove the ENCODER_CONTROL_SETUP enum from the
dac_encoder_control_prepare_params function which is actually
not a supported operation for DAC encoders.
Fixes: 0fbe321a93 ("drm/amd/display: Implement DCE analog link encoders (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apparently, the VBIOS DAC1EncoderControl function is much more
graceful about turning off the DAC. It writes various DAC
registers in a specific sequence. Use that instead of just
clearing the DAC_ENABLE register.
Do this in just the dce110_link_encoder_disable_output
function and remove it from the HWSS.
Fixes: 0fbe321a93 ("drm/amd/display: Implement DCE analog link encoders (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The analog engine is already there in the link_analog_engine
variable and assigned to enc_init_data.analog_engine already.
I suspect this was a rebase mistake.
Fixes: 436d0d22aa ("drm/amd/display: Pass proper DAC encoder ID to VBIOS")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Shaper programming has high chance to fail on first time after
power-on or reboot. This can be verified by running IGT's kms_colorop.
[How]
Always power on the shaper and 3DLUT before programming by
removing the debug flag of low power mode.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Fix fastboot broken in driver.
This is caused by an open source backport change 7495962c.
from the comment, the intended check is to disable fastboot
for pre-DCN10. but the logic check is reversed, and causes
fastboot to be disabled on all DCN10 and after.
fastboot is for driver trying to pick up bios used hw setting
and bypass reprogramming the hw if dc_validate_boot_timing()
condition meets.
Fixes: 7495962cbc ("drm/amd/display: Disable fastboot on DCE 6 too")
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some GPUs have analog connectors that work with a DP bridge chip
and don't actually have an internal DAC: Those should not use
the analog stream encoders.
Fixes: 5834c33fd3 ("drm/amd/display: Add concept of analog encoders (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some GPUs have analog connectors that work with a DP bridge chip
and don't actually have an internal DAC: Those should not use
the analog link encoder code path.
Fixes: 0fbe321a93 ("drm/amd/display: Implement DCE analog link encoders (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCE 6 should use the DCE 6 specific link encoder.
This was a copy paste mistake.
Fixes: 0fbe321a93 ("drm/amd/display: Implement DCE analog link encoders (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
eng_id can be negative and that stream_enc_regs[]
can be indexed out of bounds.
eng_id is used directly as an index into stream_enc_regs[], which has
only 5 entries. When eng_id is 5 (ENGINE_ID_DIGF) or negative, this can
access memory past the end of the array.
Add a bounds check using ARRAY_SIZE() before using eng_id as an index.
The unsigned cast also rejects negative values.
This avoids out-of-bounds access.
Fixes the below smatch error:
dcn*_resource.c: stream_encoder_create() may index
stream_enc_regs[eng_id] out of bounds (size 5).
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn351/dcn351_resource.c
1246 static struct stream_encoder *dcn35_stream_encoder_create(
1247 enum engine_id eng_id,
1248 struct dc_context *ctx)
1249 {
...
1255
1256 /* Mapping of VPG, AFMT, DME register blocks to DIO block instance */
1257 if (eng_id <= ENGINE_ID_DIGF) {
ENGINE_ID_DIGF is 5. should <= be <?
Unrelated but, ugh, why is Smatch saying that "eng_id" can be negative?
end_id is type signed long, but there are checks in the caller which prevent it from being negative.
1258 vpg_inst = eng_id;
1259 afmt_inst = eng_id;
1260 } else
1261 return NULL;
1262
...
1281
1282 dcn35_dio_stream_encoder_construct(enc1, ctx, ctx->dc_bios,
1283 eng_id, vpg, afmt,
--> 1284 &stream_enc_regs[eng_id],
^^^^^^^^^^^^^^^^^^^^^^^ This stream_enc_regs[] array has 5 elements so we are one element beyond the end of the array.
...
1287 return &enc1->base;
1288 }
v2: use explicit bounds check as suggested by Roman/Dan; avoid unsigned int cast
v3: The compiler already knows how to compare the two values, so the
cast (int) is not needed. (Roman)
Fixes: 2728e9c7c8 ("drm/amd/display: add DC changes for DCN351")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Mario Limonciello <superm1@kernel.org>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following update:
-Fix system resume lag issue
-Correct hubp GfxVersion verification
-Add parse all extension blocks for VSDB
-Increase DCN35 SR enter/exit latency
-Refactor virtual directory reorganize encoder and hwss files
-Set enable_legacy_fast_update to false for DCN36
-Have dm_atomic_state context aligned with dc_state current
-Avoid updating surface with the same surface under MPO
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For RGB BT2020 full and limited color spaces, overlay adjustments were
applied twice (once by MM and once by DAL). This results in incorrect
colours and a noticeable difference between mpo and non-mpo cases.
[How]
Add RGB BT2020 full and limited color spaces to list that bypasses post
csc adjustment.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DcGfxBase case was not accounted for in hubp program tiling functions,
causing tiling corruption on PNP.
[How]
Add handling for DcGfxBase so that tiling gets properly cleared.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Carbones <ncarbone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Virtual encoders & hwss were grouped in a separate directory,
not aligned with dio and link component structure.
[how]
Moved virtual_link_encoder and virtual_stream_encoder to dc/dio/virtual/.
Moved virtual_link_hwss to dc/link/hwss/ and renamed to link_hwss_virtual.
Removed dc/virtual/ directory.
Updated all includes and build files (Makefiles)
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is nothing wrong if in_shaper_func type is DISTRIBUTED POINTS.
Remove the assert placed for a TODO to avoid misinterpretations.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 27fc10d109 ("drm/amd/display: Fix the delta clamping for shaper
LUT") fixed banding when using plane shaper LUT in DCN10 CM helper. The
problem is also present in DCN30 CM helper, fix banding by extending the
same bug delta clamping fix to CM3.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some shimmer/colorful points appears when using the steamOS color
pipeline for HDR on gaming with DCN32. These points look like black
values being wrongly mapped to red/blue/green values. It was caused
because the number of hw points in regular LUTs and in a shaper LUT was
treated as the same.
DCN3+ regular LUTs have 257 bases and implicit deltas (i.e. HW
calculates them), but shaper LUT is a special case: it has 256 bases and
256 deltas, as in DCN1-2 regular LUTs, and outputs 14-bit values.
Fix that by setting by decreasing in 1 the number of HW points computed
in the LUT segmentation so that shaper LUT (i.e. fixpoint == true) keeps
the same DCN10 CM logic and regular LUTs go with `hw_points + 1`.
CC: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Fixes: 4d5fd3d08e ("drm/amd/display: PQ tail accuracy")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Migrate DCCG register access from hwseq to dccg component.
- Add lpddr5 handling to dml2.1
- Correct external pr fsm control
- Make DCN35 OTG disable w/a reusable
- Make DSC FGCG a DSC block level function
- Make some DCN35 DCCG symbols reusable
- Fix writeback on DCN 3.2+
- Fix IGT link training failure on Replay panel
- Fix system resume lag issue
- Add oem panel config for new features
- Fix IGT ILR link training failure on Replay panel
- Fix a NULL pointer dereference in dcn20_hwseq.c
- Add Gfx Base Case For Linear Tiling Handling
- Migrate DIO registers access from hwseq to dio component.
- Match expected data types
- Add CRC 32-bit mode support for DCN3.6+
- Init DMUB DPIA Only for APU
- DIO memory leak fix.
- Add Handling for gfxversion DcGfxBase
Acked-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is no way to set tiling in dml in the case that gfxversion is
DcGfxBase.
[How]
Where tiling is updated based on Gfx, add case for DcGfxBase and set
tiling to dml2_sw_linear.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Carbones <ncarbone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
