For eDP read the ALPM DPCD caps after DPCD initalization and just before
the PSR init.
v2: Move intel_alpm_init to intel_edp_init_dpcd (Jouni)
v3: Add Fixes with commit-id (Jouni)
v4: Separated the alpm dpcd read caps from alpm_init and moved to
intel_edp_init_dpcd.
v5: Read alpm_caps always for eDP irrespective of the eDP version (Jouni)
v6: replace drm_dp_dpcd_readb with drm_dp_dpcd_read_byte (Jouni)
Fixes: 15438b3259 ("drm/i915/alpm: Add compute config for lobf")
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patch.msgid.link/20260304072157.1123283-1-arun.r.murthy@intel.com
(cherry picked from commit 88442ba208)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Currently we are checking Panel Replay capability DPCD register in
intel_alpm.c and writing PR_ALPM_CTL_ALLOW_LINK_OFF_BETWEEN_AS_SDP_AND_SU
and PR_ALPM_CTL_AS_SDP_TRANSMISSION_IN_ACTIVE_DISABLE in PR_ALPM_CTL
register base on the informaion. Instead of directly accessing
intel_dp->pr_dpcd compute the behavior during psr_compute_config and store
it in intel_crtc_state.
v2:
- inline added helpers
- use intel_dp_attached_dp instead of passing as a parameter
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-4-jouni.hogander@intel.com
Currently ALPM parameters are computed directly into
intel_dp->alpm_parameters. This is a problem when compute config ends up to
not using the computed state.
Fix this by adding ALPM parameters into intel_crtc_state and compute into
there. Copy needed parameters (io_wake_lines and fast_wake_lines used by
PSR activate/exit) from crtc_state->alpm_state into
intel_dp->alpm.alpm_parameters when they are configured into HW.
v3:
- enhance commit message
v2:
- store io/fast wake lines into intel_dp->dp instead of
intel_dp->alpm_parameters and do it in intel_psr_enable_locked
- rename crtc_state->alpm_parameters -> crtc_state->alpm_state
- clarify commit message
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250929130003.28365-1-jouni.hogander@intel.com
Currently we are seeing these on PTL:
xe 0000:00:02.0: [drm] *ERROR* Timeout waiting for DDI BUF A to get active
These seem to be caused by writing ALPM registers while Panel Replay is
enabled.
Fix this by writing ALPM registers only when Panel Replay is about to be
enabled.
v4: improve comment on intel_psr_panel_replay_enable_sink call
v3: enable/disable ALPM from PSR code
Fixes: 172757acd6 ("drm/i915/lobf: Add lobf enablement in post plane update")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250513054814.3702977-3-jouni.hogander@intel.com
Add an interface in debugfs which will help in debugging LOBF
feature.
v1: Initial version.
v2:
- Remove FORCE_EN flag. [Jouni]
- Change prefix from I915 to INTEL. [Jani]
- Use u8 instead of bool for lobf-debug flag. [Jani]
v3:
- Use intel_connector instead of display. [Jani]
- Remove edp connector check as it was already present
in caller function. [Jani]
- Remove loop of searching edp encoder which is directly
accessible from intel_connector. [Jani]
v4:
- Simplify alpm debug to bool instead of bit-mask. [Jani]
v5:
- Remove READ_ONCE(). [Jani]
- Modify variable name to *_disable_*. [Jouni]
v6: Improved debug print. [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-8-animesh.manna@intel.com
For every commit the dependent condition for LOBF is checked
and accordingly update has_lobf flag which will be used
to update the ALPM_CTL register during commit.
v1: Initial version.
v2: Avoid reading h/w register without has_lobf check. [Jani]
v3: Update LOBF in post plane update instead of separate function. [Jouni]
v4:
- Add lobf disable print. [Jouni]
- Simplify condition check for enabling/disabling lobf. [Jouni]
v5: Disable LOBF in pre_plane_update(). [Jouni]
v6: use lobf flag of old_crtc_state and write 0 into ALPM_CTL. [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-7-animesh.manna@intel.com
Enablement of LOBF is added in post plane update whenever
has_lobf flag is set. As LOBF can be enabled in non-psr
case as well so adding in post plane update. There is no
change of configuring alpm with psr path.
v1: Initial version.
v2: Use encoder-mask to find the associated encoder from
crtc-state. [Jani]
v3: Remove alpm_configure from intel_psr.c. [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-3-animesh.manna@intel.com
Use a forward declaration for struct cec_notifier instead of including
media/cec-notifier.h in intel_display_types.h, and only include it where
needed.
Also realize that a lot of places depend on including linux/debugfs.h
via intel_display_types.h -> media/cec-notifier.h -> media/cec.h, and
include that too where needed.
v2: hsw_ips.c also needs debugfs.h (kernel test robot)
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827104521.4151471-1-jani.nikula@intel.com
Link Off Between Active Frames, is a new feature for eDP
that allows the panel to go to lower power state after
transmission of data. This is a feature on top of ALPM, AS SDP.
Add compute config during atomic-check phase.
v1: RFC version.
v2: Add separate flag for auxless-alpm. [Jani]
v3:
- intel_dp->lobf_supported replaced with crtc_state->has_lobf. [Jouni]
- Add DISPLAY_VER() check. [Jouni]
- Modify function name of get_aux_less_status. [Jani]
v4: Add enum alpm_mode to hold the aux-wake/less capability.
v5: Add alpm_dpcd to intel_dp and use aux_wake_supported()/
aux_less_wake_supported() instead of enum alpm_mode. [Jouni]
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529200742.1694401-5-animesh.manna@intel.com
