Add register definitions for sharpness strength and
filter window size used by CASF. Provide functions to
read and write these fields.
The sharpness strength value is determined by user input,
while the winsize is based on the resolution. The casf_enable
flag should be set if the platform supports sharpness adjustments
and the user API strength is not zero. Once sharpness is
enabled, update the strength bit of the register whenever
the user changes the strength value, as the enable bit and
winsize bit remain constant.
Introduce helper to enable, disable and update strength.
Add relavant strength and winsize in both enable and disable.
v2: Introduce get_config for casf[Ankit]
v3: Replace 0 with FILTER_STRENGTH_MASK[Ankit]
v4: After updating strength add win_sz register
v5: Replace u16 with u32 for total_pixel
v6: Add casf logging
v7: Add helper for enable and disable casf
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251028120747.3027332-4-ankit.k.nautiyal@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
'Set context latency' (SCL, Window W2) is defined as the number of lines
before the double buffering point, which are required to complete
programming of the registers, typically when DSB is used to program the
display registers.
Since we are not using this window for programming the registers, this
is mostly set to 0, unless there is a requirement for few cases related
to PSR/PR where the 'set context latency' should be at least 1.
Currently we are using the 'set context latency' (if required) implicitly
by moving the vblank start by the required amount and then measuring the
delay i.e. the difference between undelayed vblank start and delayed vblank
start.
Since our guardband matches the vblank length, this was not a problem as
the difference between the undelayed vblank and delayed vblank was at
the most equal to the 'set context latency' lines.
However, if we want to optimize the guardband, the difference between the
undelayed and the delayed vblank will be large and we cannot use this
difference as the 'set context latency' lines.
To make way for this optimization of guardband, formally introduce the
'set context latency' or SCL and track it as a new member
`set_context_latency` of the structure intel_crtc_state.
Eventually, all references of vblank delay where we mean to use set
context latency will be replaced by this new `set_context_latency`
member.
Note: for TGL the TRANS_SET_CONTEXT_LATENCY doesn't exist to account for
the SCL. However, the VBLANK_START-VACTIVE difference plays an identical
role here ie. it can be used to create the SCL window ahead of the
undelayed vblank.
While readback since there is no specific register to read out the SCL, use
the difference between vblank start and vactive to populate the new member
for TGL.
v2:
- Use u16 for set_context_latency. (Ville)
- s/vblank_delay/set_context_latency. (Ville)
- Meld the changes for TGL with this change. (Ville)
v3:
- Update comment to clarify the TGL case. (Ville)
- Fix typo in commit message.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250924141542.3122126-3-ankit.k.nautiyal@intel.com
Mandate a minimum Hblank symbol cycle count between BlankingStart and
BlankingEnd in 8b/10b MST and 128b/132b mode.
v2: Affine calculation/updation of min HBlank to dp_mst (Jani)
v3: moved min_hblank from struct intel_dp to intel_crtc_state (Jani)
v4: use max/min functions, change intel_xx *intel_xx to intel_xx *xx
(Jani)
Limit hblank to 511 and accommodate BS/BE in calculated value
(Srikanth)
v5: Some spelling corrections (Suraj)
v6: Removed DP2.1 in comment as this is applicable for both DP2.1 and
DP1.4 (Suraj)
v7: crtc_state holds the logical values and the register value
computation is moved to mst_enable() (Jani)
v8: Limit max hblank to 0x10, disable min_hblank on mst_disable (Jani)
Bspec: 74379
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122-hblank-v9-1-90afda006685@intel.com
- Improve display debug msgs and other general clean-ups (Ville, Rahuul)
- PSR fixes and improvements around selective fetch (Jouni, Ville)
- Remove FBC restrictions for Xe2LPD displays (Vinod)
- Skip some timing checks on BXT/GLK DSI transcoders (Ville)
- DP MST Fixes (Ville)
- Correct the input parameter on _intel_dsb_commit (heminhong)
- Fix IP version of the display WAs (Bala)
- DGFX uses direct VBT pin mapping (Clint)
- Proper handling of bool on PIPE_CONF_CHECK macros (Jani)
- Skip state verification with TBT-ALT mod (Mika Kahona)
- General organization of display code for reusage with Xe
(Jouni, Luca, Jani, Maarten)
- Squelch a sparse warning (Jani)
- Don't use "proxy" headers (Andy Shevchenko)
- Use devm_gpiod_get() for all GPIOs (Hans)
- Fix ADL+ tiled plane stride (Ville)
- Use octal permissions in display debugfs (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZXIWG6bRYaUw0w6-@intel.com
VLV has a so called "wide gamut color correction" unit (WGC).
What it is is a 3x3 matrix similar to the later CHV CGM
CSC, with less precisions/range. In fact CHV also has the WGC
but using it there doesn't really make sense when you have the
superior CGM CSC around.
Hook up the necessary stuff to expose the WGC as the CTM
crtc property.
One additional crazy idea that came to mind would be to use
the WGC as an output CSC on CHV for YCbCr output. But it
would be incompatible with the legacy LUT usage. In fact
since the WGC lacks post-offsets we'd probably have to
use the legacy LUT to do that final part of the RGB->YCbCr
conversion. Sounds doable, but perhaps not worth the hassle.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413164916.4221-6-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
The decision to use DFP output format conversion capabilities should be
during compute_config phase.
This patch adds new member to crtc_state to represent the final
output_format to the sink. In case of a DFP this can be different than
the output_format, as per the format conversion done via the PCON.
This will help to store only the format conversion capabilities of the
DP device in intel_dp->dfp, and use crtc_state to compute and store the
configuration for color/format conversion for a given mode.
v2: modified the new member to crtc_state to represent the final
output_format that eaches the sink, after possible conversion by
PCON kind of devices. (Ville)
v3: Addressed comments from Ville:
-Added comments to clarify difference between sink_format and
output_format.
-Corrected the order of setting sink_format and output_format.
-Added readout for sink_format in get_pipe_config hooks.
v4: Set sink_format for intel_sdvo too. (Ville)
v5: Rebased.
v6: Fixed condition to go for YCbCr420 format for dp and hdmi. (Ville)
v7: Fix the condition to set sink_format for HDMI.
Set hdmi output_format simply as sink_format. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v3)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-2-ankit.k.nautiyal@intel.com
DSC_Output_Format_Sink_Support entry is added to i915_dsc_fec_support_show
to depict if sink supports DSC output formats (RGB/YCbCr420/YCbCr444).
Also, new debugfs entry is created to enforce output format. This is
required because of our driver policy. For ex. if a mode is supported
in both RGB and YCbCr420 output formats by the sink, our policy is to
try RGB first and fall back to YCbCr420, if mode cannot be shown
using RGB. So, to test other output formats like YCbCr420 or YCbCr444,
we need a debugfs entry (force_dsc_output_format) to force this
output format.
v2: -Func name changed to intel_output_format_name() (Jani N)
-Return forced o/p format from intel_dp_output_format() (Jani N)
v3: -output_format_str[] to remain static (Jani N)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-8-suraj.kandpal@intel.com
Add an extra remapping step between the logical state of the LUTs
(hw.(de)gamma_lut) as specified via uapi/bigjoiner copy vs.
the actual state of the LUTs programmed into the hardware.
With this we should be finally able finish the (de)gamma
readout/state checker support for the remaining platforms
(ilk-skl) where the same hardware LUT can be positioned
either before or after the pipe CSC unit. Where we position
it depends on factors such as presence of the logical degamma
LUT, RGB vs. YCbCr output, full vs. limited RGB quantization
range.
Without the extra remapping step the state readout doesn't
really know whether the LUT read from the hardware is the
degamma or gamma LUT, and so we is unable to accurately store
it into our crtc state. With the remapping step we know
exactly where to put it given the order of the LUT vs. CSC
in the hardware state.
Only the initial hw->uapi state readout done during driver
load/resume still has the problem of not really knowing
what to do with the LUT(s). But we can just assume 1:1
mapping there and let subsequent commits fix things up.
Another benefit is that we now have a place for purely
internal LUTs, without complicating the bigjoiner uapi->hw
copy logic. This should prove useful for streamlining
glk degamma LUT handling.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024161514.5340-3-ville.syrjala@linux.intel.com
