We use forcewake to prevent the SoC from actually entering
PC8 while performing the PC8 disable sequence. Hide that
behind a new parent interface to eliminate the naked
forcewake/uncore usage from the display power code.
v2: Mark the interface optional and warn if
someone calls it when not provided (Jani)
Include the header to make sure the extern
declaration matches the definition (Jani)
v3: Rebase due to shuffling
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251218182052.18756-1-ville.syrjala@linux.intel.com
Add an irq parent driver interface for the .enabled and .synchronize
calls. This lets us drop the dependency on i915_drv.h and i915_irq.h in
multiple places, and subsequently remove the compat i915_irq.h and
i915_irq.c files along with the display/ext directory from xe
altogether.
Introduce new intel_parent.[ch] as the wrapper layer to chase the
function pointers and convert between generic and more specific display
types.
v2: Keep static wrappers in intel_display_irq.c (Ville)
v3: Full blown wrappers in intel_parent.[ch] (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/dd62dd52ef10d9ecf77da3bdf6a70f71193d141c.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Convert some of the intel_de_wait_custom() users over to
intel_de_wait_us(). We'll eventually want to eliminate
intel_de_wait_custom() as it's a hinderance towards using
poll_timeout_us().
This includes all the obvious cases where we only specify
a microsecond timeout to intel_de_wait_custom().
Done with cocci (with manual formatting fixes):
@@
expression display, reg, mask, value, timeout_us, out_value;
@@
- intel_de_wait_custom(display, reg, mask, value, timeout_us, 0, out_value)
+ intel_de_wait_us(display, reg, mask, value, timeout_us, out_value)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-6-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
intel_de_wait*() take the timeout in milliseconds. Include
that information in the function name to make life less
confusing. I'll also be introducing microsecond variants
of these later.
Done with cocci:
@@
@@
(
static int
- intel_de_wait
+ intel_de_wait_ms
(...)
{
...
}
|
static int
- intel_de_wait_fw
+ intel_de_wait_fw_ms
(...)
{
...
}
|
static int
- intel_de_wait_for_set
+ intel_de_wait_for_set_ms
(...)
{
...
}
|
static int
- intel_de_wait_for_clear
+ intel_de_wait_for_clear_ms
(...)
{
...
}
)
@@
@@
(
- intel_de_wait
+ intel_de_wait_ms
|
- intel_de_wait_fw
+ intel_de_wait_fw_ms
|
- intel_de_wait_for_set
+ intel_de_wait_for_set_ms
|
- intel_de_wait_for_clear
+ intel_de_wait_for_clear_ms
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-4-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add userptr support to ivpu.
- Add IOCTL's for resource and telemetry data in amdxdna.
Core Changes:
- Improve some atomic state checking handling.
- drm/client updates.
- Use forward declarations instead of including drm_print.h
- RUse allocation flags in ttm_pool/device_init and allow specifying max
useful pool size and propagate ENOSPC.
- Updates and fixes to scheduler and bridge code.
- Add support for quirking DisplayID checksum errors.
Driver Changes:
- Assorted cleanups and fixes in rcar-du, accel/ivpu, panel/nv3052cf,
sti, imxm, accel/qaic, accel/amdxdna, imagination, tidss, sti,
panthor, vkms.
- Add Samsung S6E3FC2X01 DDIC/AMS641RW, Synaptics TDDI series DSI,
TL121BVMS07-00 (IL79900A) panels.
- Add mali MediaTek MT8196 SoC gpu support.
- Add etnaviv GC8000 Nano Ultra VIP r6205 support.
- Document powervr ge7800 support in the devicetree.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/5afae707-c9aa-4a47-b726-5e1f1aa7a106@linux.intel.com
The remaining utils display needs from i915_utils.h are primarily
MISSING_CASE() and fetch_and_zero(), with a couple of
i915_inject_probe_failure() uses.
To avoid excessive churn, add duplicates of MISSING_CASE() and
fetch_and_zero() to intel_display_utils.h, and switch display to use the
display utils.
As long as there are display files that include i915_drv.h, which
includes i915_utils.h, we'll need #ifndef guards for MISSING_CASE() and
fetch_and_zero() in both utils headers. We can remove them once display
no longer depends on i915_drv.h.
A couple of files in display still need i915_utils.h for
i915_inject_probe_failure(). Annotate this. They will be handled
separately.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/79f9e31ca64c8c045834d48e20ceb0c515d1e9e1.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
During system resume the display power state verification will print the
"power well x state mismatch (refcount 0/enabled 1)"
error message from the early resume sequence for a power well left
enabled by BIOS. This power well was probably left enabled by BIOS
inadvertently, since BIOS versions on current platforms do not leave any
display output enabled while resuming from an Sx power state, hence the
enabled display power well is unused. In theory however it is possible
that BIOS leaves a display output enabled, in that case the enabled
power well shouldn't be reported as an error.
According to the above, remove the display power state verification from
the early resume phase to avoid incorrectly reporting an enabled power
well without a power reference as an error.
Note: The refcount for any enabled and used power well (i.e. used for an
enabled display output) will be acquired following the early resume
sequence, after the HW state for display outputs (encoder/crtc etc.) is
read out. Any power well enabled but not used (hence not holding a
reference) will be disabled after the HW state readout. The display
power state will be verified afterwards in intel_power_domains_enable().
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6012
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250903122152.2526050-1-imre.deak@intel.com
This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Now that INTEL_PCH_TYPE() and HAS_PCH_*() macros are under display, and
accept a struct intel_display pointer, use that instead of struct
drm_i915_private pointer in display code.
This is done naively by running:
$ sed -i 's/\(INTEL_PCH_TYPE\|HAS_PCH_[A-Z0-9_-]*\)([^)]*)/\1(display)/g' \
$(find drivers/gpu/drm/i915/display -name "*.c")
and fixing the fallout, i.e. removing unused local i915 variables and
adding display variables where needed.
v2: Rebase
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/999f4d7b8ed11739b1c5ec8d6408fc39d5e3776b.1744880985.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The bspec only asks the driver to reprogram the DBUF_CTL's
DBUF_TRACKER_STATE_SERVICE field to 0x8 on DG2 and platforms with
display version 12. All other platforms should avoid reprogramming
this register at driver init.
Although we've been accidentally reprogramming DBUF_CTL on platforms
where the spec does not ask us to, that mistake has been harmless so
far because the value being programmed by the driver happened to
match the hardware's default settings.
So, update DBUF_TRACKER_STATE_SERVICE field to 0x8 only for
1. display version 12
2. DG2.
Other platforms unless stated should use their default value.
Bspec: 49213
Signed-off-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108200210.1815229-1-ravi.kumar.vodapalli@intel.com
[mattrope: Tweaked patch subject to accurately reflect content]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Move intel_power_domains_{suspend,resume} to inside
intel_display_power_{suspend_late, resume_early}.
With this also change the VLV suspend failure to call
the intel_display_power_resume_early. In the end, the only
function executed there for VLV is the intel_power_domains_resume.
Besides make the code more consistency give the call that was
immediately before: intel_display_power_suspend_late.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241113225016.208673-7-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Use x100, or ver * 100 + rel, versions for full IP version checks,
similar to what xe driver does:
- Replace IP_VER(14, 1) inline with 1401, etc.
- Convert DISPLAY_VER_FULL() to DISPLAY_VERx100()
- Convert IS_DISPLAY_VER_FULL() to IS_DISPLAY_VERx100()
- Convert IS_DISPLAY_VER_STEP() to IS_DISPLAY_VERx100_STEP()
This makes ver.rel versions easier to use, follows the xe driver
pattern, and drops the dependency on the IP_VER() macro.
v2: Rebase, drop IP_VER() from xe compat headers
v3: Rebase
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029155536.753413-1-jani.nikula@intel.com
