The remaining utils display needs from i915_utils.h are primarily
MISSING_CASE() and fetch_and_zero(), with a couple of
i915_inject_probe_failure() uses.
To avoid excessive churn, add duplicates of MISSING_CASE() and
fetch_and_zero() to intel_display_utils.h, and switch display to use the
display utils.
As long as there are display files that include i915_drv.h, which
includes i915_utils.h, we'll need #ifndef guards for MISSING_CASE() and
fetch_and_zero() in both utils headers. We can remove them once display
no longer depends on i915_drv.h.
A couple of files in display still need i915_utils.h for
i915_inject_probe_failure(). Annotate this. They will be handled
separately.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/79f9e31ca64c8c045834d48e20ceb0c515d1e9e1.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The current wait_panel_status() uses intel_de_wait(),
which internally on Xe platforms calls xe_mmio_wait32().
xe_mmio_wait32() increases poll interval exponentially.
This exponential poll interval increase causes unnessory delays
during resume or power-on when the panel becomes ready earlier,
but polling is delayed due to backoff.
Replace intel_de_wait() with read_poll_timeout() +
intel_de_read() to actively poll the register at a fixed 10ms interval
up to a 5 second timeout. This allows poll to exit
early when panel is ready.
Changes in v2:
Replaced two-phase intel_de_wait() with read_poll_timeout()
+ intel_de_read()
Changes in v3:
- Add poll_interval_ms argument 'wait_panel_status' function.
- Modify 'wait_panel_status' callers with proper poll interval
Changes in v4:
- Change 'wait_panel_off' poll interval to 10ms
Changes in v5:
- Dropped poll_interval_ms parameter,use fixed polling
interval of 10ms (Jani Nikula)
Changes in v6:
- Removed goto in error path
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Link: https://lore.kernel.org/r/20250807082402.79018-1-dibin.moolakadan.subrahmanian@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Create a new unordered workqueue to be used by the display code
instead of relying on the i915 one. Then move all the unordered works
used in the display code to use this new queue.
Since this is an unordered workqueue, by definition there can't be any
order dependency with non-display works, so no extra care is needed
in regard to that.
This is part of the effort to isolate the display code from i915.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250620091632.1256135-1-luciano.coelho@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Now that INTEL_PCH_TYPE() and HAS_PCH_*() macros are under display, and
accept a struct intel_display pointer, use that instead of struct
drm_i915_private pointer in display code.
This is done naively by running:
$ sed -i 's/\(INTEL_PCH_TYPE\|HAS_PCH_[A-Z0-9_-]*\)([^)]*)/\1(display)/g' \
$(find drivers/gpu/drm/i915/display -name "*.c")
and fixing the fallout, i.e. removing unused local i915 variables and
adding display variables where needed.
v2: Rebase
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/999f4d7b8ed11739b1c5ec8d6408fc39d5e3776b.1744880985.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
While updating the source OUI on the sink the driver should avoid
writing the OUI if it's already up-to-date to prevent the sink from
resetting itself in response to the update. On eDP - the only output
type where the OUI was updated so far - the driver ensured this by
comparing the current source OUI DPCD register values with the expected
Intel OUI value, skipping the update in case of a match. On some non-eDP
sinks - at least on Synaptics branch devices - this method doesn't work,
since the source OUI DPCD registers read back as all 0, even after
updating the registers.
Handle the above kind of sinks by tracking when the OUI was updated and
so should be valid, regardless of what the DPCD registers contain.
eDP sinks reset the written source OUI value when the panel power is
disabled, invalidate the OUI state accordingly.
This is required by a follow-up patch updating the source OUI for
non-eDP sink types as well.
v2: Fix setting intel_dp::oui_valid=true, if the DPCD register contains
already the expected value.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-5-imre.deak@intel.com
The sink's capabilities, like the DSC caps, depend on the source OUI
written to the sink's DPCD registers and so this OUI value should be
valid for the whole duration of the detection. An eDP sink will reset
this OUI value when the panel power is disabled, so prevent the
disabling - happening by default after a 1 sec idle period - for the
whole duration of detection.
v2: Update the documentation for intel_pps_on(). (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-3-imre.deak@intel.com
The intel_pps_reset_all() function does similar but not quite the same
things for VLV/CHV and BXT/GLK. Observe that it's called from platform
specific code only, and a split to two functions vlv_pps_reset_all() and
bxt_pps_reset_all() is natural.
Remove the platform checks and warnings from the functions. We don't
usually have them, unless we're unsure. To make this easier to reason
about for BXT/GLK, change the condition on caller side from "!PCH" to
"BXT || GLK".
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240919090427.1859032-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use a forward declaration for struct cec_notifier instead of including
media/cec-notifier.h in intel_display_types.h, and only include it where
needed.
Also realize that a lot of places depend on including linux/debugfs.h
via intel_display_types.h -> media/cec-notifier.h -> media/cec.h, and
include that too where needed.
v2: hsw_ips.c also needs debugfs.h (kernel test robot)
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827104521.4151471-1-jani.nikula@intel.com
Disable bit 29 of SCLKGATE_DIS register around pps sequence
when we turn panel power on.
--v2
-Squash two commit together [Jani]
-Use IS_DISPLAY_VER [Jani]
-Fix multiline comment [Jani]
--v3
-Define register in a more appropriate place [Mitul]
--v4
-Register is already defined no need to define it again [Ville]
-Use correct WA number (lineage no.) [Dnyaneshwar]
-Fix the range on which this WA is applied [Dnyaneshwar]
Bspec: 49304
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813042807.4015214-1-suraj.kandpal@intel.com
