This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
intel_de_wait*() take the timeout in milliseconds. Include
that information in the function name to make life less
confusing. I'll also be introducing microsecond variants
of these later.
Done with cocci:
@@
@@
(
static int
- intel_de_wait
+ intel_de_wait_ms
(...)
{
...
}
|
static int
- intel_de_wait_fw
+ intel_de_wait_fw_ms
(...)
{
...
}
|
static int
- intel_de_wait_for_set
+ intel_de_wait_for_set_ms
(...)
{
...
}
|
static int
- intel_de_wait_for_clear
+ intel_de_wait_for_clear_ms
(...)
{
...
}
)
@@
@@
(
- intel_de_wait
+ intel_de_wait_ms
|
- intel_de_wait_fw
+ intel_de_wait_fw_ms
|
- intel_de_wait_for_set
+ intel_de_wait_for_set_ms
|
- intel_de_wait_for_clear
+ intel_de_wait_for_clear_ms
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-4-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Expose key Type-C port data in i915_display_info to make it easier to
understand the port configuration and active mode, especially whether
the link is in DP-Alt or TBT-Alt, without having to scan kernel logs.
Tested in DP-Alt, TBT-Alt, SST, and MST.
Expected output:
[CONNECTOR:290:DP-2]: status: connected
TC Port: E/TC#2 mode: tbt-alt pin assignment: - max lanes: 4
physical dimensions: 600x340mm
...
[CONNECTOR:263:DP-5]: status: connected
TC Port: G/TC#4 mode: dp-alt pin assignment: C max lanes: 4
physical dimensions: 610x350mm
v2: Use drm_printer (Ville)
Lock/Unlock around the printf (Imre)
v3: Forward Declaration drm_printer struct (Jani)
v4: Handle MST connector with no active encoder (Imre)
Add a delimiter between fields and ":" after the port name (Imre)
v5: Init dig_port and use it in intel_encorder_is_tc and tc_info (Imre)
Move tc->port_name to a newline (Imre)
v6: Use intel_tc_port_lock/Unlock (Imre)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251028190753.3089937-1-khaled.almahallawy@intel.com
The remaining utils display needs from i915_utils.h are primarily
MISSING_CASE() and fetch_and_zero(), with a couple of
i915_inject_probe_failure() uses.
To avoid excessive churn, add duplicates of MISSING_CASE() and
fetch_and_zero() to intel_display_utils.h, and switch display to use the
display utils.
As long as there are display files that include i915_drv.h, which
includes i915_utils.h, we'll need #ifndef guards for MISSING_CASE() and
fetch_and_zero() in both utils headers. We can remove them once display
no longer depends on i915_drv.h.
A couple of files in display still need i915_utils.h for
i915_inject_probe_failure(). Annotate this. They will be handled
separately.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/79f9e31ca64c8c045834d48e20ceb0c515d1e9e1.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There is a possibility that intel_encoder_to_tc() function
returns negative i.e. TC_PORT_NONE (-1) value which may cause
tc_port_power_domain() function to overflow. To fix this,
let's add additional check that returns invalid power domain
i.e. POWER_DOMAIN_INVALID in case tc port equals TC_PORT_NONE.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250829101226.4085757-1-mika.kahola@intel.com
The pin assignment is only relevant in case the PHY is owned by the
display, that is in legacy and DP-alt mode. In TBT-alt mode the PHY is
owned by the TBT FW/driver and so the pin assignment/configuration is
managed by those components. A follow-up change will cache the pin
assignment value in all the TypeC modes - querying this by calling
get_pin_assignment() - prepare for that here, by reporting pin
assignment NONE in the TBT-alt mode.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-18-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Pass the intel_tc_port pointer instead of intel_digital_port to all lane
mask and count query helpers internal to intel_tc.c, to avoid the
redundant intel_digital_port -> intel_tc_port conversions.
While at it shorten the function names, keeping the intel_tc_port_
prefix only for exported functions and use the mtl_, icl_ prefixes
making it clear which platforms a given query function is specific for.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-17-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
For consistency, handle pin assignment NONE on all platforms similarly
to LNL+. On earlier platforms the driver doesn't actually see this pin
assignment - as it's not valid on a connected DP-alt PHY - however it's
a valid HW setting even on those platforms, for instance in legacy mode.
Handle this pin assignment on earlier platforms as well, so that the way
to query the pin assignment can be unified by a follow-up change.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-12-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Add an enum for the TypeC pin assignment, which is a better way to pass
its value around than a plain integer. While at it add a description for
each pin assignment, based on the DP and DP Alt mode Standards, opting
for more details to ease any future debugging related to a given pin
assignment and the cables / sink types used.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
[Imre: s/deined/defined in pin assignment enum documentation.]
Link: https://lore.kernel.org/r/20250805073700.642107-10-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Use the PHY's cached max lane count value on all platforms similarly to
LNL+. On LNL+ using the cached value is mandatory - since the
corresponding HW register field can get cleared by the time the value is
queried - on earlier platforms there isn't a problem with using the HW
register instead. Having a uniform way to query the value still makes
sense and it's also a bit more efficient, so do that.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-7-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
On LNL+ for a disconnected sink the pin assignment value gets cleared by
the HW/FW as soon as the sink gets disconnected, even if the PHY
ownership got acquired already by the BIOS/driver (and hence the PHY
itself is still connected and used by the display). During HW readout
this can result in detecting the PHY's max lane count as 0 - matching
the above cleared aka NONE pin assignment HW state. For a connected PHY
the driver in general (outside of intel_tc.c) expects the max lane count
value to be valid for the video mode enabled on the corresponding output
(1, 2 or 4). Ensure this by setting the max lane count to 4 in this
case. Note, that it doesn't matter if this lane count happened to be
more than the max lane count with which the PHY got connected and
enabled, since the only thing the driver can do with such an output -
where the DP-alt sink is disconnected - is to disable the output.
v2: Rebased on change reading out the pin configuration only if the PHY
is connected.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-4-imre.deak@intel.com
The PHY's pin assignment value in the TCSS_DDI_STATUS register - as set
by the HW/FW based on the connected DP-alt sink's TypeC/PD pin
assignment negotiation - gets cleared by the HW/FW on LNL+ as soon as
the sink gets disconnected, even if the PHY ownership got acquired
already by the driver (and hence the PHY itself is still connected and
used by the display). This is similar to how the PHY Ready flag gets
cleared on LNL+ in the same register.
To be able to query the max lane count value on LNL+ - which is based on
the above pin assignment - at all times even after the sink gets
disconnected, the max lane count must be determined and cached during
the PHY's HW readout and connect sequences. Do that here, leaving the
actual use of the cached value to a follow-up change.
v2: Don't read out the pin configuration if the PHY is disconnected.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-3-imre.deak@intel.com
The TypeC PHY HW readout during driver loading and system resume
determines which TypeC mode the PHY is in (legacy/DP-alt/TBT-alt) and
whether the PHY is connected, based on the PHY's Owned and Ready flags.
For the PHY to be in DP-alt or legacy mode and for the PHY to be in the
connected state in these modes, both the Owned (set by the BIOS/driver)
and the Ready (set by the HW) flags should be set.
On ICL-MTL the HW kept the PHY's Ready flag set after the driver
connected the PHY by acquiring the PHY ownership (by setting the Owned
flag), until the driver disconnected the PHY by releasing the PHY
ownership (by clearing the Owned flag). On LNL+ this has changed, in
that the HW clears the Ready flag as soon as the sink gets disconnected,
even if the PHY ownership was acquired already and hence the PHY is
being used by the display.
When inheriting the HW state from BIOS for a PHY connected in DP-alt
mode on which the sink got disconnected - i.e. in a case where the sink
was connected while BIOS/GOP was running and so the sink got enabled
connecting the PHY, but the user disconnected the sink by the time the
driver loaded - the PHY Owned but not Ready state must be accounted for
on LNL+ according to the above. Do that by assuming on LNL+ that the PHY
is connected in DP-alt mode whenever the PHY Owned flag is set,
regardless of the PHY Ready flag.
This fixes a problem on LNL+, where the PHY TypeC mode / connected state
was detected incorrectly for a DP-alt sink, which got connected and then
disconnected by the user in the above way.
v2: Rename tc_phy_in_legacy_or_dp_alt_mode() to tc_phy_owned_by_display().
(Luca, Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
[Imre: Add one-liner function documentation for tc_phy_owned_by_display()]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-2-imre.deak@intel.com
This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
It's not clear which encoder intel_dp_mst_encoder_active_links() refers
to (primary/stream), but there is also no reason to call the queried
property an encoder property; remove encoder from the name. Also it's
the number of MST streams being queried, vs. the number of MST links
(there is one MST link carrying one or more MST streams), so rename link
to stream as well.
While at it pass intel_dp to the function, which is more logical and
makes it easier to re-use the function later (without the need to get
the digital port pointer).
Also move the function earlier, next to the related ones.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-5-imre.deak@intel.com
Forward declare struct drm_printer instead of including drm/drm_print.h,
as we only need the pointer. Turns out quite a few places depend on this
include implicitly. Make them explicit.
Some of the includes are just stale and unnecessary. Group the forward
declarations together while at it.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250326115452.2090275-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There is a HW issue that arises when there are race conditions
between TCSS entering/exiting TC7 or TC10 states while the
driver is asserting/deasserting TCSS power request. As a
workaround, Display driver will implement a mailbox sequence
to ensure that the TCSS is in TC0 when TCSS power request is
asserted/deasserted.
The sequence is the following
1. Read mailbox command status and wait until run/busy bit is
clear
2. Write mailbox data value '1' for power request asserting
and '0' for power request deasserting
3. Write mailbox command run/busy bit and command value with 0x1
4. Read mailbox command and wait until run/busy bit is clear
before continuing power request.
v2: Rename WA function (Gustavo)
Limit WA only for PTL platform with a TODO note (Gustavo)
Add TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY for clarity when writing
register data (Gustavo)
Move register defs from i915_reg.h to intel_cx0_phy_regs.h (Gustavo)
v3: Use "struct intel_display" instead of "struct drm_i915_private" (Jani)
Move defs above C10 definitions in the
intel_cx0_phy_regs.h file (Gustavo)
Move drm_WARN_ON() inside WA function (Gustavo)
Rename workaround function as wa_14020908590() (Gustvo)
Use boolean enable instead of if-else structure (Raag)
v4: Drop drm_WARN_ON() (Raag)
Fix function definition to fit into a single line (Raag)
v5: Drop TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY from TCSS_DISP_MAILBOX_IN_CMD_DATA(val)
macro (Jani)
Rename WA function with some meaningful name and add comment
on WA number (Jani)
Use struct intel_display on WA calling function (Jani)
Reviewed-by: Raag Jadav <raag.jadav@intel.com> (v4)
Acked-by: Jani Nikula <jani.nikula@intel.com> (v5)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127073200.124907-2-mika.kahola@intel.com
Starting with Xe_LPD+, although FIA is still used to readout Type-C pin
assignment, part of Type-C support is moved to PICA and programming
PORT_TX_DFLEXDPMLE1(*) registers is not applicable anymore like it was
for previous display IPs (e.g. see BSpec 49190).
v2:
- Mention Bspec 49190 as a reference of instructions for previous
IPs. (Shekhar Chauhan)
- s/Xe_LPDP/Xe_LPD+/ in the commit message. (Matt Roper)
- Update commit message to be more accurate to the changes in the IP.
(Imre Deak)
Bspec: 65750, 65448
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625202652.315936-1-gustavo.sousa@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Some registers for DDI A/B moved to PICA and now follow the same format
as the ones for the PORT_TC ports. The wrapper here deals with 2 issues:
- Share the implementation between xe2lpd and previous
platforms: there are minor layout changes, it's mostly the
register location that changed
- Handle offsets after TC ports
v2:
- Explain better the trick to use just the second range (Matt Roper)
- Add missing conversions after rebase (Matt Roper)
- Use macro instead of inline function, avoiding includes in the
header (Jani)
- Prefix old macros with underscore so they don't get used by mistake,
and name the new ones using the previous names
v3: Use the same logic for the recently-introduced XELPDP_PORT_MSGBUS_TIMER
(Gustavo)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126224638.4132016-3-lucas.demarchi@intel.com
Glitches deasserting the connector HPD line can lead to incorrectly
detecting a disconnect event (a glitch asserting the line will only
cause a redundant connect->disconnect transition). The source of such a
glitch can be noise on the line or a 0.5ms-1ms MST IRQ_HPD pulse. TypeC
ports in the DP-alt or TBT-alt mode filter out these glitches inernally,
but for others the driver has to do this. Make it so by polling the HPD
line on these connectors for 4 ms.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-12-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Add hooks to intel_digital_port to lock and unlock the port and add a
helper to check the connector's detect status while the port is locked
already. This simplifies checking the connector detect status in
intel_dp_aux_xfer() and intel_digital_port_connected() in the next two
patches aborting AUX transfers on all DP connectors (except eDP) and
filtering HPD glitches.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-11-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
When going through the disconnection flow we don't need to wait for PHY
readiness and hence we can skip the wait part. For disabling the function
returns false as an indicator that the power is not enabled. After all,
we are not even using the return value when Type-C is disconnecting.
v2: Cleanup for increased readibility (Imre)
BSpec: 65380
For VLK-53734
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212115130.485911-1-mika.kahola@intel.com
Fix below compiler warning:
intel_tc.c:1879:11: error: ‘%d’ directive output may be truncated
writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
"%c/TC#%d", port_name(port), tc_port + 1);
^~
intel_tc.c:1878:2: note: ‘snprintf’ output between 7 and 17 bytes
into a destination of size 8
snprintf(tc->port_name, sizeof(tc->port_name),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%c/TC#%d", port_name(port), tc_port + 1);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
v2: use kasprintf(Imre)
v3: use const for port_name, and fix tc mem leak(Imre)
Fixes: 3eafcddf76 ("drm/i915/tc: Move TC port fields to a new intel_tc_port struct")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026125636.5080-1-nirmoy.das@intel.com
