When DSC is enabled on a pipe, the pipe pixel rate input to the
CDCLK frequency and pipe joining calculation needs an adjustment to
account for compression overhead "bubbles" added at each horizontal
slice boundary.
Account for this overhead while computing min cdclk required for DSC.
v2:
- Get rid of the scaling factor and return unchanged pixel-rate
instead of 0.
v3:
- Use mul_u32_u32() for the bubble-adjusted pixel rate to avoid 64x64
multiplication and drop redundant casts in DIV_ROUND_UP_ULL(). (Imre)
Bspec:68912
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251223150826.2591182-1-ankit.k.nautiyal@intel.com
The remaining utils display needs from i915_utils.h are primarily
MISSING_CASE() and fetch_and_zero(), with a couple of
i915_inject_probe_failure() uses.
To avoid excessive churn, add duplicates of MISSING_CASE() and
fetch_and_zero() to intel_display_utils.h, and switch display to use the
display utils.
As long as there are display files that include i915_drv.h, which
includes i915_utils.h, we'll need #ifndef guards for MISSING_CASE() and
fetch_and_zero() in both utils headers. We can remove them once display
no longer depends on i915_drv.h.
A couple of files in display still need i915_utils.h for
i915_inject_probe_failure(). Annotate this. They will be handled
separately.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/79f9e31ca64c8c045834d48e20ceb0c515d1e9e1.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Track whether DSC is enabled on any CRTC on a link. On DP-SST (and DSI)
this will always match the CRTC's DSC state, those links having only a
single stream (aka CRTC). For instance, on DP-MST if DSC is enabled for
CRTC#0, but disabled for CRTC#1, the DSC/FEC state for these CRTCs will
be as follows:
CRTC#0:
- compression_enable = true
- compression_enabled_on_link = true
- fec_enable = true for 8b10b, false for 128b132b
CRTC#1:
- compression_enable = false
- compression_enabled_on_link = true
- fec_enable = true for 8b10b, false for 128b132b
This patch only sets compression_enabled_on_link for CRTC#0 above and
enables FEC on CRTC#0 if DSC was enabled on any other CRTC on the 8b10b
MST link. A follow-up change will make sure that the state of all the
CRTCs (CRTC#1 above) on an MST link is recomputed if DSC gets enabled on
any CRTC, setting compression_enabled_on_link and fec_enable for these.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251015161934.262108-6-imre.deak@intel.com
Add a helper to enable the DSC compression configuration for a CRTC.
Follow-up changes will introduce tracking for the same DSC state on the
whole link, which will need to be set whenever DSC is enabled for the
CRTC. Also, according to the above, when querying the DSC state on the
link, both the CRTC's and the link's DSC state must be considered.
Setting the DSC configuration for a CRTC and querying the DSC
configuration for the link (added by follow-up changes) is better done
via helper functions based on the above, prepare for that here.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251015161934.262108-2-imre.deak@intel.com
Forward declare struct drm_printer instead of including drm/drm_print.h,
as we only need the pointer. Turns out quite a few places depend on this
include implicitly. Make them explicit.
Some of the includes are just stale and unnecessary. Group the forward
declarations together while at it.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250326115452.2090275-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Some DSI panel vendors end up hardcoding PPS params because of which
it does not listen to the params sent from the source. We use the
default config tables for DSI panels when using DSC 1.1 rather than
calculate our own rc parameters.
--v2
-Use intel_crtc_has_type [Jani]
--v4
-Use a function to check Mipi dsi dsc 1.1 condition [Ankit]
-Add documentation for using this condition [Ankit]
-Rebase
--v5
-Pass only the crtc_state [Jani]
-Fixup the comment [Jani]
-Check for dsc major version [Jani]
-Use co-developed-by tag [Jani]
--v6
-Add more definition of the issue and solution in the comment [Ankit]
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13719
Co-developed-by: William Tseng <william.tseng@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228152531.403026-1-suraj.kandpal@intel.com
At the moment dsc_split represents whether the dsc splitter is used
or not. With 3 DSC engines, the splitter can split into two streams
or three streams.
Instead of representing the splitter's state, it is more effective to
represent the number of DSC streams per pipe.
Replace the `dsc.dsc_split` member with `dsc.num_streams` to indicate the
number of DSC streams used per pipe. This change will implicitly
convey the splitter's operation mode.
v2: Avoid new enum for dsc split. (Suraj)
v3:
-Replace dsc_split with num_stream. (Suraj)
-Avoid extra parentheses. (Jani)
v4: Set num_streams to 1, if VDSC_JOINER not set while readout.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030041036.1238006-3-ankit.k.nautiyal@intel.com
In most of the cases we now try to avoid mentioning things like
"bigjoiner" or "ultrajoiner" trying to unify the API and refer
mostly to all this functionality as "joiner".
In majority cases that should be way to go.
However in some cases we still need to distinguish between
bigjoiner primaries and secondaries(such as DSC register programming).
Create correspondent helper functions and start using them,
in order be prepared for adding ultrajoiner functionality.
v2: Fixed checkpatch warnings (Ankit)
v3: Introduce ultrajoiner helpers in next patch.
v4: Streamline the helpers and add few more. (Ville)
v5: Add comment to clarify that helpers apply to both bigjoiner and
uncompressed joiner configurations. (Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918063016.2667721-2-ankit.k.nautiyal@intel.com
DSC parameter bits_per_pixel is stored in U6.4 format.
The 4 bits represent the fractional part of the bpp.
Currently we use compressed_bpp member of dsc structure to store
only the integral part of the bits_per_pixel.
To store the full bits_per_pixel along with the fractional part,
compressed_bpp is changed to store bpp in U6.4 formats. Intergral
part is retrieved by simply right shifting the member compressed_bpp by 4.
v2:
-Use to_bpp_int, to_bpp_frac_dec, to_bpp_x16 helpers while dealing
with compressed bpp. (Suraj)
-Fix comment styling. (Suraj)
v3:
-Add separate file for 6.4 fixed point helper(Jani, Nikula)
-Add comment for magic values(Suraj)
v4:
-Fix checkpatch warnings caused by renaming(Suraj)
v5:
-Rebase.
-Use existing helpers for conversion of bpp_int to bpp_x16
and vice versa.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-3-ankit.k.nautiyal@intel.com
We have setup both the read and write functions so we can
move ahead and fill in all the readout state from PPS register
into the crtc_state so we can send it for comparision.
--v2
-Shorten comment to just PPSX rather than having the whole
"Readout PPSX register" [Jani]
-Remove pps_temp reinitialization as its being initialized in
the read function [Jani]
-Use REG_FIELD_GET to readout certain fields of dsc registers
[Jani]
--v9
-Place the masks at a more appropriate place [Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828054300.560559-8-suraj.kandpal@intel.com
Now that we have a function that reads any PPS register based
on intel_dsc_pps enum provided lets create a function that can
write on any PPS.
--v2
-Changes need as PPS enum was dropped
-Remove duplicated code in intel_dsc_write_pps_reg [Jani]
--v3
-Use dsc_split instead of num_vdsc_instances [Ankit]
--v5
-Changes to implement the new dsc_reg array variable passing
[Ankit]
--v7
-Pass no of vdsc instances to get_pps_reg [Ankit]
--v8
-No need for dsc_reg dynamic allocation [Jani]
-Change function to void as no return needs to be sent back
--v9
-Send ARRAY_SIZE(dsc_reg) instead of vdsc_per_pipe [Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828054300.560559-6-suraj.kandpal@intel.com
Add function to read any PPS register based on the
intel_dsc_pps enum provided. Add a function which will call the
new pps read function and place it in crtc state. Only PPS0 and
PPS1 are readout the rest of the registers will be read in upcoming
patches.
--v2
-Changes in read function as PPS enum is removed
-Initialize pps_val as 0 in pps_read func itself [Jani]
-Create a function that gets the required register and call that
in the common read function [Jani]
-Move the drm_WARN_ON one abstraction layer above [Jani]
--v3
-Send both reg values regardless of dsc engine no [Jani]
-Don't use num_vdsc_instances stick to dsc_split field [Ankit]
--v4
-Manipulate the reg values instead of creating MACRO to change
name of pps [Ankit]
--v5
-Read dsc reg values using array rather than individual variables
[Ankit]
-Loop the verification of all dsc engine reads to future proof it
[Ankit]
-Keep the fix me comment in this patch and remove it in later one
where we add other readouts [Ankit]
-Add switch statement that fills in the required registers based on
no of vdsc engines per pipe.
--v7
-Pass no of vdsc instances from read_reg function [Ankit]
-Fix issue where arrays do not get freed on return for read_and_verify
func [Ankit]
--v8
-Simplify reading and verifying of register and remove dynamically
allocated arrays [Jani]
-Remove no_ from no_vdsc_per_pipe and wherever else it applies [Ankit]
--v9
-change variable name to dsc_reg_size rather than vdsc_per_pipe [Ankit]
--v10
-remove switch case as we never enter case1 [Ankit]
--v11
-Add _ prefix for register that are not supposed to be used directly
[Jani]
-Remove REG suffix from register macros [Jani]
-Do not duplicate register read [Jani]
--v12
-Use vdsc_per_pipe rather than array size of dsc_reg [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828054300.560559-5-suraj.kandpal@intel.com
