We use forcewake to prevent the SoC from actually entering
PC8 while performing the PC8 disable sequence. Hide that
behind a new parent interface to eliminate the naked
forcewake/uncore usage from the display power code.
v2: Mark the interface optional and warn if
someone calls it when not provided (Jani)
Include the header to make sure the extern
declaration matches the definition (Jani)
v3: Rebase due to shuffling
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251218182052.18756-1-ville.syrjala@linux.intel.com
Switch error injection testing from i915_inject_probe_failure
to ALLOW_ERROR_INJECTION. Here taken out calls to
i915_inject_probe_failure and changed to use
ALLOW_ERROR_INJECTION for the same functions.
Below functions are dropped from testing since I
couldn't hit those at module bind time, testing
these would just fail the tests. To include these
in test would need to find way to cause resetting in i915
which would trigger these:
intel_gvt_init
intel_wopcm_init
intel_uc_fw_upload
intel_gt_init with expected -EIO (-EINVAL is tested)
lrc_init_wa_ctx
intel_huc_auth
guc_check_version_range
intel_uc_fw_fetch
uc_fw_xfer
__intel_uc_reset_hw
guc_enable_communication
uc_init_wopcm
..and all stages of __force_fw_fetch_failures
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20251216080754.221974-2-juhapekka.heikkila@gmail.com
Whether AuxCCS can be properly supported depends on the support both from
the display side and non-display side of the driver.
Let us therefore allow for the non-display part to be queried via the
display parent interface.
The new interface replaces the HAS_AUX_CCS macro and we also remove the
FIXME from skl_universal_plane_create since now the xe will not advertise
the AuxCCS caps to start with so they do not need to be removed after
enumeration.
Also, by removing this build specific FIXME we come a step closer to fully
de-coupling display and non-display.
The existing HAS_AUX_CCS gets renamed to HAS_AUX_DIST since it is still
required for determining the need for PLANE_AUX_DIST programming.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
References: cf48bddd31 ("drm/i915/display: Disable AuxCCS framebuffers if built for Xe")
Cc: intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com> # v1
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251209120034.9143-1-tursulin@igalia.com
Add an irq parent driver interface for the .enabled and .synchronize
calls. This lets us drop the dependency on i915_drv.h and i915_irq.h in
multiple places, and subsequently remove the compat i915_irq.h and
i915_irq.c files along with the display/ext directory from xe
altogether.
Introduce new intel_parent.[ch] as the wrapper layer to chase the
function pointers and convert between generic and more specific display
types.
v2: Keep static wrappers in intel_display_irq.c (Ville)
v3: Full blown wrappers in intel_parent.[ch] (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/dd62dd52ef10d9ecf77da3bdf6a70f71193d141c.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm/i915 feature pull for v6.19:
Features and functionality:
- Enable LNL+ content adaptive sharpness filter (CASF) (Nemesa)
- Use optimized VRR guardband (Ankit, Ville)
- Enable Xe3p LT PHY (Suraj)
- Enable FBC support for Xe3p_LPD display (Sai Teja, Vinod)
- Specify DMC firmware for display version 30.02 (Dnyaneshwar)
- Report reason for disabling PSR to debugfs (Michał)
- Extend i915_display_info with Type-C port details (Khaled)
- Log DSI send packet sequence errors and contents
Refactoring and cleanups:
- Refactoring to prepare for VRR guardband optimization (Ankit)
- Abstract VRR live status wait (Ankit)
- Refactor VRR and DSB timing to handle Set Context Latency explicitly (Ankit)
- Helpers for prefill latency calculations (Ville)
- Refactor SKL+ watermark latency setup (Ville)
- VRR refactoring and cleanups (Ville)
- SKL+ universal plane cleanups (Ville)
- Decouple CDCLK from state->modeset refactor (Ville)
- Refactor VLV/CHV clock functions (Jani)
- Refactor fbdev handling (Jani)
- Call i915 and xe runtime PM from display via function pointers (Jouni)
- IRQ code refactoring (Jani)
- Drop display dependency on i915 feature check macros (Jani)
- Refactor and unify i915 and xe stolen memory interfaces towards display (Jani)
- Switch to driver agnostic drm to display pointer chase (Jani)
- Use display version over graphics version in display code (Matt A)
- GVT cleanups (Jonathan, Andi)
- Rename a VLV clock function to unify (Michał)
- Explicitly sanitize DMC package header num entries (Luca)
- Remove redundant port clock check from ALPM (Jouni)
- Use sysfs_emit() instead of sprintf() in PMU sysfs (Madhur Kumar)
- Clean up C20 PHY PLL register macros (Imre, Mika))
- Abstract "address in MMIO table" helper for general use (Matt A)
- Improve VRR platform abstractions (Ville)
- Move towards more standard PCI PM code usage (Ville)
- Framebuffer refactoring (Ville)
- Drop display dependency on i915_utils.h (Jani)
- Include cleanups (Jani)
Fixes:
- Workaround docking station DSC issues with high pixel clock and bpp (Imre)
- Fix Panel Replay in DSC mode (Imre)
- Disable tracepoints for PREEMPT_RT as a workaround (Maarten)
- Fix intel_crtc_get_vblank_counter() on PREEMPT_RT (Maarten)
- Fix C10 PHY identification on PTL/WCL (Dnyaneshwar)
- Take AS SDP into account with optimized guardband (Jouni)
- Fix panic structure allocation memory leak (Jani)
- Adjust an FBC workaround platforms (Vinod)
- Add fallback for CDCLK selection (Naladala)
- Avoid using invalid transcoder in MST transport select (Suraj)
- Don't use cursor size reduction on display version 14+ (Nemesa)
- Fix C20 PHY PLL register programming (Imre, Mika)
- Fix PSR frontbuffer flush handling (Jouni)
- Store ALPM parameters in crtc state (Jouni)
- Defeature DRRS on LNL+ (Ville)
- Fix the scope of the large DRAM DIMM workaround (Ville)
- Fix PICA vs. AUX power ordering issue (Gustavo)
- Fix pixel rate for computing watermark line time (Ville)
- Fix framebuffer set_tiling vs. addfb race (Ville)
- DMC event handler fixes (Ville)
DRM Core:
- CRTC sharpness strength property (Nemesa)
- DPCD DSC quirk for Synaptics Panamera devices (Imre)
- Helpers to query the branch DSC max throughput/line-width (Imre)
Merges:
- Backmerge drm-next for v6.18-rc and to sync with drm-xe-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/ec5a05f2df6d597a62033ee2d57225cce707b320@intel.com
Let's gradually start calling i915 and xe parent, or core, drivers from
display via function pointers passed at display probe.
Going forward, the struct intel_display_parent_interface is expected to
include const pointers to sub-structs by functionality, for example:
struct intel_display_rpm {
struct ref_tracker *(*get)(struct drm_device *drm);
/* ... */
};
struct intel_display_parent_interface {
/* ... */
const struct intel_display_rpm *rpm;
};
This is a baby step towards not building display as part of both i915
and xe drivers, but rather making it an independent driver interfacing
with the two.
v3: useless include additions dropped
v2: unrelated include removal dropped
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251030202836.1815680-2-jouni.hogander@intel.com
The display driver needs to get from the struct drm_device pointer to
the struct intel_display pointer. Currently, this depends on knowledge
of the struct drm_i915_private and struct xe_device definitions, but
we'd like to hide those definitions from display.
Require the struct drm_device and struct intel_display * members within
struct drm_i915_private and struct xe_device to be placed next to each
other, to be able to figure out the display pointer without knowledge of
the structures.
Use a generic dummy device structure to define the relative offsets of
the drm and display members, and add static assertions to ensure this
holds for both i915 and xe. Use the dummy structure to do the pointer
chase from struct drm_device * to struct intel_display *.
This requires moving the display member in struct xe_device after the
drm member.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250926111032.1188876-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Since this switcheroo garbage bypasses all the core pm we
have to manually manage the pci state. To that end add the
missing pci_restore_state() to the switcheroo resume hook.
We already have the pci_save_state() counterpart on the
suspend side.
Arguably none of this code should exist in the driver
in the first place, and instead the entire switcheroo
mechanism should be rewritten and properly integrated into
core pm code...
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250919185015.14561-5-ville.syrjala@linux.intel.com
If the driver doesn't call pci_save_state() drivers/pci will
normally save+power manage the device from the _noirq() pm hooks.
We can't let that happen as some old BIOSes fail to hibernate
when the device is in D3. However, we can get very close to
the standard behaviour by doing our explicit pci_save_state()
and pci_set_power_state() stuff from driver provided _noirq()
hooks.
This results in a change of behaviour where we no longer go
into D3 at the end of freeze_late, so when it comes time
to thaw() we'll already be in D0, and thus we can drop the
explicit pci_set_power_state(D0) call.
Presumably switcheroo suspend will want to go into D3 so
call the _noirq() stuff from the switcheroo suspend hook,
and since we dropped the pci_set_power_state(D0) from
resume_early() we'll need to add one back into the
switcheroo resume hook.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250919185015.14561-4-ville.syrjala@linux.intel.com
As the first step towards making struct intel_display an opaque pointer
in i915 and xe drivers, convert the struct drm_i915_private and struct
xe_device display members into pointers.
Initially, add temporary struct intel_display __display members, and
point display at it to avoid dynamic allocation. In the future, we can
drop this, and switch to dynamic allocation.
The conversion is done simply with sed:
sed -i 's/&\([a-zA-Z0-9_>.-]*\)\(dev_priv\|i915\|xe\)->display\([^.]\)/\1\2->display\3/g' \
$(git ls-files -- drivers/gpu/drm/i915 drivers/gpu/drm/xe)
sed -i 's/\(dev_priv\|i915\|xe\)->display\./\1->display->/g' \
$(git ls-files -- drivers/gpu/drm/i915 drivers/gpu/drm/xe)
With a couple of manual tweaks on top.
v2: Initialize i915->display also in selftest mock_gem_device()
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250507152254.2398934-1-jani.nikula@intel.com
Observe that i915->irq_lock is no longer used to protect anything
outside of display. Make it a display thing.
This allows us to remove the ugly #define irq_lock irq.lock hack from xe
compat header.
Note that this is slightly more subtle than it first looks. For i915,
there's no functional change here. The lock is moved. However, for xe,
we'll now have *two* locks, xe->irq.lock and display->irq.lock. These
should protect different things, though. Indeed, nesting in the past
would've lead to a deadlock because they were the same lock.
With the i915 references gone, we can make a handful more files
independent of i915_drv.h.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/6d8d2ce0f34a9c7361a5e2fcf96bb32a34c57e76.1746536745.git.jani.nikula@intel.com
[Jani: Fixed a comment while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently we disable the VGA plane from various places, sometimes
multiple times in the same init/resume sequence. Get rid of all this
mess and do it just once. The most correct place seems to be just
after intel_early_display_was() as that one applies various workarounds
that need to be in place before we touch any planes (including the
VGA plane).
Actually, we do still have a second caller in
vlv_display_power_well_init(). I think we still need that as the reset
value of VGACNTR is 0x0 and thus technically the VGA plane will be
(at least partially) enabled after the power well has been toggled.
In both cases we have the necessary power reference already held
(INIT power domain for load/resume case, and the display power well
itself being what we need for vlv_display_power_well_init()).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250417114454.12836-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
