Beyond Display related:
- Switch to use kernel standard fault injection in i915 (Juha-Pekka)
Display uAPI related:
- Display uapi vs. hw state fixes (Ville)
- Expose sharpness only if num_scalers is >= 2 (Nemesa)
Display related:
- More display driver refactor and clean-ups, specially towards separation (Jani)
- Add initial support Xe3p_LPD for NVL (Gustavo, Sai, )
- BMG FBC W/a (Vinod)
- RPM fix (Dibin)
- Add MTL+ platforms to support dpll framework (Mika, Imre)
- Other PLL related fixes (Imre)
- Fix DIMM_S DRAM decoding on ICL (Ville)
- Async flip refactor (Ville, Jouni)
- Go back to using AUX interrupts (Ville)
- Reduce severity of failed DII FEC enabling (Grzelak)
- Enable system cache support for FBC (Vinod)
- Move PSR/Panel Replay sink data into intel_connector and other PSR changes (Jouni)
- Detect AuxCCS support via display parent interface (Tvrtko)
- Clean up link BW/DSC slice config computation(Imre)
- Toggle powerdown states for C10 on HDMI (Gustavo)
- Add parent interface for PC8 forcewake tricks (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aUW3bVDdE63aSFOJ@intel.com
Make use of the new drm_gem_huge_mnt_create() and
drm_gem_get_huge_mnt() helpers to avoid code duplication. Now that
it's just a few lines long, the single function in i915_gemfs.c is
moved into i915_gem_shmem.c.
v3:
- use huge tmpfs mountpoint in drm_device
- move i915_gemfs.c into i915_gem_shmem.c
v4:
- clean up mountpoint creation error handling
v5:
- use drm_gem_has_huge_mnt() helper
v7:
- include <drm/drm_print.h> in i915_gem_shmem.c
v8:
- keep logging notice message with CONFIG_TRANSPARENT_HUGEPAGE=n
- don't access huge_mnt field with CONFIG_TRANSPARENT_HUGEPAGE=n
v9:
- replace drm_gem_has_huge_mnt() by drm_gem_get_huge_mnt()
- remove useless ternary op test in selftests/huge_pages.c
v12:
- fix layering violation in selftests (Tvrtko)
- fix incorrect filename in commit message
v13:
- add Tvrtko A-b
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patch.msgid.link/20251205182231.194072-6-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
The current attempted split between xe/i915 vs. display
for intel_frontbuffer is a mess:
- the i915 rcu leaks through the interface to the display side
- the obj->frontbuffer write-side is now protected by a display
specific spinlock even though the actual obj->framebuffer
pointer lives in a i915 specific structure
- the kref is getting poked directly from both sides
- i915_active is still on the display side
Clean up the mess by moving everything about the frontbuffer
lifetime management to the i915/xe side:
- the rcu usage is now completely contained in i915
- frontbuffer_lock is moved into i915
- kref is on the i915/xe side (xe needs the refcount as well
due to intel_frontbuffer_queue_flush()->intel_frontbuffer_ref())
- the bo (and its refcounting) is no longer on the display side
- i915_active is contained in i915
I was pondering whether we could do this in some kind of smaller
steps, and perhaps we could, but it would probably have to start
with a bunch of reverts (which for sure won't go cleanly anymore).
So not convinced it's worth the hassle.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-10-ville.syrjala@linux.intel.com
The display driver needs to get from the struct drm_device pointer to
the struct intel_display pointer. Currently, this depends on knowledge
of the struct drm_i915_private and struct xe_device definitions, but
we'd like to hide those definitions from display.
Require the struct drm_device and struct intel_display * members within
struct drm_i915_private and struct xe_device to be placed next to each
other, to be able to figure out the display pointer without knowledge of
the structures.
Use a generic dummy device structure to define the relative offsets of
the drm and display members, and add static assertions to ensure this
holds for both i915 and xe. Use the dummy structure to do the pointer
chase from struct drm_device * to struct intel_display *.
This requires moving the display member in struct xe_device after the
drm member.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250926111032.1188876-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The struct_mutex will be removed from the DRM subsystem, as it was a
legacy BKL that was only used by i915 driver. After review, it was
concluded that its usage was no longer necessary
This patch updates various comments in the i915 codebase to
either remove or clarify references to struct_mutex, in order to
prevent future misunderstandings.
* i915_drv.h: Removed the statement that stolen_lock is the inner lock
when overlaps with struct_mutex, since struct_mutex is no longer used
in the driver.
* i915_gem.c: Removed parentheses suggesting usage of struct_mutex, which
which is no longer used.
Signed-off-by: Luiz Otavio Mello <luiz.mello@estudante.ufscar.br>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250908131518.36625-8-luiz.mello@estudante.ufscar.br
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As the first step towards making struct intel_display an opaque pointer
in i915 and xe drivers, convert the struct drm_i915_private and struct
xe_device display members into pointers.
Initially, add temporary struct intel_display __display members, and
point display at it to avoid dynamic allocation. In the future, we can
drop this, and switch to dynamic allocation.
The conversion is done simply with sed:
sed -i 's/&\([a-zA-Z0-9_>.-]*\)\(dev_priv\|i915\|xe\)->display\([^.]\)/\1\2->display\3/g' \
$(git ls-files -- drivers/gpu/drm/i915 drivers/gpu/drm/xe)
sed -i 's/\(dev_priv\|i915\|xe\)->display\./\1->display->/g' \
$(git ls-files -- drivers/gpu/drm/i915 drivers/gpu/drm/xe)
With a couple of manual tweaks on top.
v2: Initialize i915->display also in selftest mock_gem_device()
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250507152254.2398934-1-jani.nikula@intel.com
Observe that i915->irq_lock is no longer used to protect anything
outside of display. Make it a display thing.
This allows us to remove the ugly #define irq_lock irq.lock hack from xe
compat header.
Note that this is slightly more subtle than it first looks. For i915,
there's no functional change here. The lock is moved. However, for xe,
we'll now have *two* locks, xe->irq.lock and display->irq.lock. These
should protect different things, though. Indeed, nesting in the past
would've lead to a deadlock because they were the same lock.
With the i915 references gone, we can make a handful more files
independent of i915_drv.h.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/6d8d2ce0f34a9c7361a5e2fcf96bb32a34c57e76.1746536745.git.jani.nikula@intel.com
[Jani: Fixed a comment while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Pull drm updates from Dave Airlie:
"There's a lot of rework, the panic helper support is being added to
more drivers, v3d gets support for HW superpages, scheduler
documentation, drm client and video aperture reworks, some new
MAINTAINERS added, amdgpu has the usual lots of IP refactors, Intel
has some Pantherlake enablement and xe is getting some SRIOV bits, but
just lots of stuff everywhere.
core:
- split DSC helpers from DP helpers
- clang build fixes for drm/mm test
- drop simple pipeline support for gem vram
- document submission error signaling
- move drm_rect to drm core module from kms helper
- add default client setup to most drivers
- move to video aperture helpers instead of drm ones
tests:
- new framebuffer tests
ttm:
- remove swapped and pinned BOs from TTM lru
panic:
- fix uninit spinlock
- add ABGR2101010 support
bridge:
- add TI TDP158 support
- use standard PM OPS
dma-fence:
- use read_trylock instead of read_lock to help lockdep
scheduler:
- add errno to sched start to report different errors
- add locking to drm_sched_entity_modify_sched
- improve documentation
xe:
- add drm_line_printer
- lots of refactoring
- Enable Xe2 + PES disaggregation
- add new ARL PCI ID
- SRIOV development work
- fix exec unnecessary implicit fence
- define and parse OA sync props
- forcewake refactoring
i915:
- Enable BMG/LNL ultra joiner
- Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+
- use DSB for plane/color mgmt
- Arrow lake PCI IDs
- lots of i915/xe display refactoring
- enable PXP GuC autoteardown
- Pantherlake (PTL) Xe3 LPD display enablement
- Allow fastset HDR infoframe changes
- write DP source OUI for non-eDP sinks
- share PCI IDs between i915 and xe
amdgpu:
- SDMA queue reset support
- SMU 13.0.6, JPEG 4.0.3 updates
- Initial runtime repartitioning support
- rework IP structs for multiple IP instances
- Fetch EDID from _DDC if available
- SMU13 zero rpm user control
- lots of fixes/cleanups
amdkfd:
- Increase event FIFO size
- add topology cap flag for per queue reset
msm:
- DPU:
- SA8775P support
- (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support
- Enable large framebuffer support
- Drop MSM8998 and SDM845
- DP:
- SA8775P support
- GPU:
- a7xx preemption support
- Adreno A663 support
ast:
- warn about unsupported TX chips
ivpu:
- add coredump
- add pantherlake support
rockchip:
- 4K@60Hz display enablement
- generate pll programming tables
panthor:
- add timestamp query API
- add realtime group priority
- add fdinfo support
etnaviv:
- improve handling of DMA address limits
- improve GPU hangcheck
exynos:
- Decon Exynos7870 support
mediatek:
- add OF graph support
omap:
- locking fixes
bochs:
- convert to gem/shmem from simpledrm
v3d:
- support big/super pages
- add gemfs
vc4:
- BCM2712 support refactoring
- add YUV444 format support
udmabuf:
- folio related fixes
nouveau:
- add panic support on nv50+"
* tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel: (1583 commits)
drm/xe/guc: Fix dereference before NULL check
drm/amd: Fix initialization mistake for NBIO 7.7.0
Revert "drm/amd/display: parse umc_info or vram_info based on ASIC"
drm/amd/display: Fix failure to read vram info due to static BP_RESULT
drm/amdgpu: enable GTT fallback handling for dGPUs only
drm/amd/amdgpu: limit single process inside MES
drm/fourcc: add AMD_FMT_MOD_TILE_GFX9_4K_D_X
drm/amdgpu/mes12: correct kiq unmap latency
drm/amdgpu: Support vcn and jpeg error info parsing
drm/amd : Update MES API header file for v11 & v12
drm/amd/amdkfd: add/remove kfd queues on start/stop KFD scheduling
drm/amdkfd: change kfd process kref count at creation
drm/amdgpu: Cleanup shift coding style
drm/amd/amdgpu: Increase MES log buffer to dump mes scratch data
drm/amdgpu: Implement virt req_ras_err_count
drm/amdgpu: VF Query RAS Caps from Host if supported
drm/amdgpu: Add msg handlers for SRIOV RAS Telemetry
drm/amdgpu: Update SRIOV Exchange Headers for RAS Telemetry Support
drm/amd/display: 3.2.309
drm/amd/display: Adjust VSDB parser for replay feature
...
The .is_lp member of struct intel_device_info and its wrapper IS_LP()
are used to identify just four platforms, VLV/CHV/BXT/GLK. It didn't
become as important as it was perhaps originally planned. Just remove
it, and replace with exact platform identification. In a few places this
becomes slightly verbose, but in many places it improves clarity to
immediately see the exact platforms.
Additionally, this lets us remove the xe compat macro.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930124056.3541988-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In the future, the display code shall not have any idea about struct
xe_device or struct drm_i915_private, but will need to get at the struct
drm_device via drvdata. Store the struct drm_device pointer to drvdata
instead of the driver specific pointer.
Avoid passing NULL to container_of() via to_i915()/to_xe_device(). (It
does return NULL for NULL pointers when the offset happens to be 0, but
otherwise returns garbage pointers for NULL.)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/946805b32e38d4785880cc7857e01e6a309126a9.1724942754.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
ARL and MTL share a single GSC firmware blob. However, ARL requires a
newer version of it.
So add differentiate of the PCI ids for ARL from MTL and create ARL as
a sub-platform of MTL. That way, all the existing workarounds and such
still treat ARL as MTL exactly as before. However, now the GSC code
can check for ARL and do an extra version check on the firmware before
committing to it.
Also, the version extraction code has various ways of failing but the
return code was being ignore and so the firmware load would attempt to
continue anyway. Fix that by propagating the return code to the next
level out.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: 213c43676b ("drm/i915/mtl: Remove the 'force_probe' requirement for Meteor Lake")
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802031051.3816392-1-John.C.Harrison@Intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
