This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Having only a single set of callbacks, hdmi_clear_infoframe and
hdmi_write_infoframe, bridge drivers don't have an easy way to signal to
the DRM framework, which InfoFrames are actually supported by the
hardware and by the driver and which are not. Also, it makes it
extremely easy for HDMI bridge drivers to skip implementing the
seemingly required InfoFrames (e.g. HDMI VSI). Last, but not least,
those callbacks take a single 'type' parameter, which makes it
impossible to implement support for multiple VSIs (which will be
required once we start working on HDMI Forum VSI).
Split the callbacks into a per-InfoFrame-kind pairs, letting the bridge
drivers actually signal supported features. The implementation follows
the overall drm_bridge design, where the bridge has a single
drm_bridge_funcs implementation and signals, which functions are to be
called using the drm_bridge->ops flags.
The AVI and HDMI VSI are assumed to be required for a normal HDMI
operation (with the drivers getting a drm_warn_once() stub
implementation if one is missing). The Audio InfoFrame is handled by the
existing DRM_BRIDGE_OP_HDMI_AUDIO, while the SPD and HDR DRM InfoFrames
got new drm_bridge_ops values.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-5-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Partially refactor mtk_gem to stop using (and remove) the unneeded
custom mtk_gem_obj structure and migrate drivers to use the API
defined drm_gem_dma_object structure instead, and to align all of
the functions to be similar to the logic from drm_gem_dma_helper.
Unfortunately, for this driver it wasn't possible to directly use
the drm_gem_dma_helper callbacks (apart from .print_info), as the
DMA mapping here is done on specific dma devices instead of the
main DRM device.
Also, since the mtk_gem_obj structure is no more, also migrate the
mtk_plane.c code to grab the DMA address from a drm_gem_dma_object
and replace the inclusion of the custom mtk_gem.h header (as it is
now unneeded) with the DRM API provided drm_gem_dma_helper.
While at it, also set DRM_GEM_DMA_HELPER as an unconditional
dependency (remove the `if DRM_FBDEV_EMULATION` from the select
DRM_GEM_DMA_HELPER statement in Kconfig).
This resolves an issue pointed by UBSAN, as when using drm_fbdev_dma
the drm_gem_object is supposed to be child of a drm_gem_dma_object
instead of a custom mtk_gem_obj (or the mtk_gem_obj should have been
reordered to have the same fields as drm_gem_dma_object, but that
would have been too fragile and generally a bad idea anyway).
Fixes: 0992284b4f ("drm/mediatek: Use fbdev-dma")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20251111085114.9752-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Trying to find the next bridge and deferring probe in the bridge attach
callback is much too late. At this point the driver has already finished
probing and is now running the component bind code path. What's even
worse is that in the specific case of the DSI host being the last
component to be added as part of the dsi_host_attach callback, the code
path that this is in:
-> devm_drm_of_get_bridge()
mtk_dpi_bridge_attach()
drm_bridge_attach()
mtk_dpi_bind()
...
component_add()
mtk_dsi_host_attach()
anx7625_attach_dsi()
anx7625_link_bridge()
- done_probing callback for of_dp_aux_populate_bus()
of_dp_aux_populate_bus()
anx7625_i2c_probe()
_cannot_ return probe defer:
anx7625 4-0058: [drm:anx7625_bridge_attach] drm attach
mediatek-drm mediatek-drm.15.auto: bound 14014000.dsi
(ops mtk_dsi_component_ops)
mediatek-drm mediatek-drm.15.auto: error -EPROBE_DEFER:
failed to attach bridge /soc/dpi@14015000 to encoder TMDS-37
[drm:mtk_dsi_host_attach] *ERROR* failed to add dsi_host
component: -517
anx7625 4-0058: [drm:anx7625_link_bridge] *ERROR* fail to attach dsi
to host.
panel-simple-dp-aux aux-4-0058: DP AUX done_probing() can't defer
panel-simple-dp-aux aux-4-0058: probe with driver panel-simple-dp-aux
failed with error -22
anx7625 4-0058: [drm:anx7625_i2c_probe] probe done
This results in the whole display driver failing to probe.
Perhaps this was an attempt to mirror the structure in the DSI driver;
but in the DSI driver the next bridge is retrieved in the DSI attach
callback, not the bridge attach callback.
Move the code finding the next bridge back to the probe function so that
deferred probing works correctly. Also rework the fallback to the old OF
graph endpoint numbering scheme so that deferred probing logs in both
cases.
This issue was found on an MT8183 Jacuzzi device with an extra patch
enabling the DPI-based external display pipeline. Also tested on an
MT8192 Hayato device with both DSI and DPI display pipelines enabled.
Fixes: 4c932840db ("drm/mediatek: Implement OF graphs support for display paths")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20260114092243.3914836-1-wenst@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
By adjusting the order of link training and relocating it to HPD,
link training can identify the usability of each lane in the current link.
It also supports handling signal instability and weakness due to
environmental issues, enabling the acquisition of a stable bandwidth
for the current link. Subsequently, DP work can proceed based on
the actual maximum bandwidth.
It should training in the hpd event thread.
Check the mode with lane count and link rate of training.
If we're eDP and capabilities were already parsed we can skip
reading again because eDP panels aren't hotpluggable hence the
caps and training information won't ever change in a boot life
Therefore, bridge typec judgment is required for edp training in
atomic_enable function.
`mtk_dp_parse_capabilities` is related to DP training, it is
used in `mtk_dp_hpd_event_thread` before DP training, and then only
used by eDP when read edid.
-Modify part of in `mtk_dp_bridge_atomic_disable`
if (mtk_dp->train_info.cable_plugged_in) {
drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, DP_SET_POWER_D3);
usleep_range(2000, 3000);
}
/* power off aux */
mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
DP_PWR_STATE_BANDGAP_TPLL,
DP_PWR_STATE_MASK);
-Modify part of in `mtk_dp_aux_panel_poweron(mtk_dp, false);`
if (pwron) {
....
} else {
/* power off panel */
drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, DP_SET_POWER_D3);
usleep_range(2000, 3000);
/* power off aux */
mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
DP_PWR_STATE_BANDGAP_TPLL,
DP_PWR_STATE_MASK);
}
The `mtk_dp_aux_panel_poweron` function fails to align.
Within the `mtk_dp_hpd_event_thread`, if DP is disconnected,
the `mtk_dp_aux_panel_poweron` function will write from `aux`
to `DPRX`, causing a failure and thus preventing symmetry.
This shows the current timings after the DP cable is plugged in,
as well as the modified timings.
current timings: Fix timings:
mtk_dp_hpd_event_thread() mtk_dp_hpd_event_thread()
(including DP link training)
| |
... ...
mtk_dp_bridge_mode_valid() mtk_dp_bridge_mode_valid()
|
... ...
mtk_dp_bridge_atomic_check() mtk_dp_bridge_atomic_check()
|
... ...
mtk_dp_bridge_atomic_enable() mtk_dp_bridge_atomic_enable()
(including DP link training)
PS:
1. "..." represents ommited steps;
2. `mtk_dp_bridge_mode_valid()` calculates the bandwidth using the
current lane count and link rate, and then filters each mode to
determine if it supports returning a status.
3. In the `drm_display_mode_to_videomode(&crtc_state->adjusted_mode,
&mtk_dp->info.vm);` function, within the `mtk_dp_bridge_atomic_check()`
function, `adjusted_mode` sets the currently selected display mode for
the DRM.
4. DP link training tests the signal conditions of the link between
DPTX and DPRX, and selects the lane count and link rate that meet
the signal conditions.
5. For example, the platform support DP 4lane 5.4G,
but panel A support DP 2lane 5.4G.
This is a time sequence:
a).Plug in panel A. According to the platform, it can output 4K60Hz.
b).Timing mode set 4K 60Hz(Including in mtk_dp_bridge_atomic_check
function).
c).Atomic enable(Based on panel A ability, training pass 2lane
5.4G).
d).Finally, due to 2lane 5.4G bandwidth limitation, the platform
cannot output 4K 60Hz, resulting in a black sreen.
If apply this patch.
a).Plug in panel A.
b).Training pass 2lane 5.4G
c).Timing mode set 2K 60Hz(Based on the 2lane 5.4G bandwidth limit
and including in mtk_dp_bridge_atomic_che
Signed-off-by: Liankun Yang <liankun.yang@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20251223061755.7717-1-liankun.yang@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Currently, the mtk_hdmi_ddc_v2 driver sends a i2c message by calling
the mtk_ddc_wr_one function for each byte of the payload to setup
SI2C_CTRL and DDC_CTRL registers, and perform a sequential write
transfer of one byte at a time to the target device. This leads to
incorrect transfers as the target address (at least) is also sent each
time.
So, rename mtk_ddc_wr_one function to mtk_ddcm_write_hdmi to match the
read function name (mtk_ddcm_read_hdmi) and modify its behaviour to
send all payload data in a single sequential write transfer by filling
the transfer fifo first then starting the transfer with a size equal to
the payload size and not one anymore.
Fixes: 8d0f798862 ("drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20251205-mtk-hdmi-ddc-v2-fixes-v1-2-260dd0d320f4@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
During a read or write transfer, the mtk_hdmi_ddc_v2 driver polls the
DDC_I2C_IN_PROG bit of HPD_DDC_STATUS register to check if the transfer
completes but do no particular action if a timeout is reached. It could
lead the next transfer attempts to fail because the faulty transfer was
not aborted. So, add in both low level read and write functions a abort
action by writing the DDC_CTRL register with the ABORT_XFER command
value.
Fixes: 8d0f798862 ("drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20251205-mtk-hdmi-ddc-v2-fixes-v1-1-260dd0d320f4@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
When building with -Wincompatible-function-pointer-types-strict, a
warning designed to catch kernel control flow integrity (kCFI) issues at
build time, there is an instance in the new HDMI v2 drm/mediatek code:
drivers/gpu/drm/mediatek/mtk_hdmi_v2.c:1331:31: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(const struct drm_bridge *, const struct drm_display_mode *, unsigned long long)' with an expression of type 'int (const struct drm_bridge *, const struct drm_display_mode *, unsigned long long)' [-Werror,-Wincompatible-function-pointer-types-strict]
1331 | .hdmi_tmds_char_rate_valid = mtk_hdmi_v2_hdmi_tmds_char_rate_valid,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
While 'int' and 'enum drm_mode_status' are ABI compatible, hence no
regular warning from -Wincompatible-function-pointer-types, the mismatch
will trigger a kCFI violation when mtk_hdmi_v2_tmds_char_rate_valid() is
called indirectly.
Update the return type of mtk_hdmi_v2_tmds_char_rate_valid() to be 'enum
drm_mode_status' to clear up the warning and kCFI violation.
Fixes: 8d0f798862 ("drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20251125-drm-mediatek-hdmi-v2-wifpts-v1-1-a6c7582cf69a@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The i2c adapter for ddc might not be available yet due to e.g. its
module not yet being loaded. To handle that defer probing rather then
returning a fatal error when probing.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Implement the Automated Built-In Self-Test ABIST functionality
provided by the HDMIv2 IP and expose it through the "hdmi_abist"
debugfs file.
Write "1" to this file to activate ABIST, or "0" to deactivate.
The ABIST functionality can be used to validate that the HDMI
Transmitter itself works and that can output a valid image to
the HDMI Display that is connected.
This is especially useful when trying to rule out any possible
issue that is related to the display pipeline, as the HDMI Tx
is always the last component; this means that HDMI ABIST can be
used even without prior display controller pipeline configuration.
The expected output is a 100% color bar (rainbow) test pattern.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251023-mediatek-drm-hdmi-v2-v11-10-7873ec4a1edf@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add support for the newer HDMI-TX (Encoder) v2 and DDC v2 IPs
found in MediaTek's MT8195, MT8188 SoC and their variants, and
including support for display modes up to 4k60 and for HDMI
Audio, as per the HDMI 2.0 spec.
HDCP and CEC functionalities are also supported by this hardware,
but are not included in this commit and that also poses a slight
difference between the V2 and V1 controllers in how they handle
Hotplug Detection (HPD).
While the v1 controller was using the CEC controller to check
HDMI cable connection and disconnection, in this driver the v2
one does not.
This is due to the fact that on parts with v2 designs, like the
MT8195 SoC, there is one CEC controller shared between the HDMI
Transmitter (HDMI-TX) and Receiver (HDMI-RX): before eventually
adding support to use the CEC HW to wake up the HDMI controllers
it is necessary to have support for one TX, one RX *and* for both
at the same time.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251023-mediatek-drm-hdmi-v2-v11-9-7873ec4a1edf@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
ddc_v2
ddc_v2
In preparation for adding the HDMI TX v2 driver, and to allow
a future modernization of the HDMI v1 one, perform changes
that enable the usage of the HDMI Helpers provided by DRM.
Check if the HDMI driver provides the function pointers to
hdmi_{clear,write}_infoframe used by the HDMI Helper API and,
if present, add DRM_BRIDGE_OP_HDMI to the drm_bridge ops,
enabling the drm API to register the bridge as HDMI and to use
the HDMI Helper functions.
If the hdmi_{write,clear}_infoframe pointers are not assigned,
vendor and product strings and HDMI helpers will not be used,
hence this commit brings no functional changes to drivers that
have not been refactored to use the new helpers.
This also means that, in the current state, there is effectively
no functional change to mtk_hdmi and its other components.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251023-mediatek-drm-hdmi-v2-v11-7-7873ec4a1edf@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
In preparation for adding a new driver for HDMIv2, for which CEC
is not strictly required, change the of_get_compatible_child()
failure error to -EOPNOTSUPP to be able to differentiate between
error conditions in mtk_hdmi_dt_parse_pdata().
In that case, if -EOPNOTSUPP is returned, this driver will print
an informative message saying that CEC support is unavailable,
as the devicetree node for that was not found, but after that,
function mtk_hdmi_dt_parse_pdata() will not return error to
the caller.
This will not change functionality of the mtk_hdmi (v1) driver
as that is still checking whether CEC is present and, if not,
will fail probing with an error saying that CEC is required
by HDMIv1.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251023-mediatek-drm-hdmi-v2-v11-5-7873ec4a1edf@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
In preparation for adding a driver for the HDMIv2 IP and before
moving the common bits out of this driver, add a new structure
`mtk_hdmi_ver_conf`, holding pointers to HDMI IP version specific
drm_bridge_funcs, hdmi_codec_ops and clock array used for probe,
and nest it into the mtk_hdmi_conf platform data structure.
While at it, also convert all of the direct users of
mtk_hdmi_bridge_funcs, mtk_hdmi_audio_codec_ops, mtk_hdmi_clk_names
to use pointers from the ver_conf platform data.
In order to do so, it was also necessary to fill a new version 1
specific const `mtk_hdmi_v1_ver_conf` and assign it to all of the
currently supported compatibles for this driver.
This commit brings no functional change.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251023-mediatek-drm-hdmi-v2-v11-3-7873ec4a1edf@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Using device_find_child() and of_find_device_by_node() to locate
devices could cause an imbalance in the device's reference count.
device_find_child() and of_find_device_by_node() both call
get_device() to increment the reference count of the found device
before returning the pointer. In mtk_drm_get_all_drm_priv(), these
references are never released through put_device(), resulting in
permanent reference count increments. Additionally, the
for_each_child_of_node() iterator fails to release node references in
all code paths. This leaks device node references when loop
termination occurs before reaching MAX_CRTC. These reference count
leaks may prevent device/node resources from being properly released
during driver unbind operations.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Cc: stable@vger.kernel.org
Fixes: 1ef7ed4835 ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250812071932.471730-1-make24@iscas.ac.cn/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Since commit c9b1150a68 ("drm/atomic-helper: Re-order bridge chain
pre-enable and post-disable"), the bridge pre_enable callbacks are now
called before crtc enable, and the bridge post_disable callbacks after
the crtc disable.
In the mediatek-drm driver, this change leads to transfer errors on
mtk_dsi_host_transfer callback processing during the panel bridge
pre-enable sequence because the DSI host bridge pre_enable and CRTC
enable sequences, that are enabling the required clocks and PHY using
mtk_dsi_poweron function, are called after.
So, in order to fix this call order issue, request the DSI host bridge
be pre-enabled before panel bridge by setting pre_enable_prev_first
flag on DSI device bridge in the mtk_dsi_host_attach function.
Fixes: c9b1150a68 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250701-mediatek-drm-fix-dsi-panel-init-v1-1-7af4adb9fdeb@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Introduce error handling to address an issue where, after a hotplug
event, the cursor continues to update. This situation can lead to a
kernel panic due to accessing the NULL `old_state->crtc`.
E,g.
Unable to handle kernel NULL pointer dereference at virtual address
Call trace:
mtk_crtc_plane_disable+0x24/0x140
mtk_plane_atomic_update+0x8c/0xa8
drm_atomic_helper_commit_planes+0x114/0x2c8
drm_atomic_helper_commit_tail_rpm+0x4c/0x158
commit_tail+0xa0/0x168
drm_atomic_helper_commit+0x110/0x120
drm_atomic_commit+0x8c/0xe0
drm_atomic_helper_update_plane+0xd4/0x128
__setplane_atomic+0xcc/0x110
drm_mode_cursor_common+0x250/0x440
drm_mode_cursor_ioctl+0x44/0x70
drm_ioctl+0x264/0x5d8
__arm64_sys_ioctl+0xd8/0x510
invoke_syscall+0x6c/0xe0
do_el0_svc+0x68/0xe8
el0_svc+0x34/0x60
el0t_64_sync_handler+0x1c/0xf8
el0t_64_sync+0x180/0x188
Adding NULL pointer checks to ensure stability by preventing operations
on an invalid CRTC state.
Fixes: d208261e9f ("drm/mediatek: Add wait_event_timeout when disabling plane")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250728025036.24953-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
