This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Since commit 56de5e305d ("clk: renesas: r9a07g044: Add MSTOP for RZ/G2L")
we may get the following kernel panic, for some panels, when rebooting:
systemd-shutdown[1]: Rebooting.
Call trace:
...
do_serror+0x28/0x68
el1h_64_error_handler+0x34/0x50
el1h_64_error+0x6c/0x70
rzg2l_mipi_dsi_host_transfer+0x114/0x458 (P)
mipi_dsi_device_transfer+0x44/0x58
mipi_dsi_dcs_set_display_off_multi+0x9c/0xc4
ili9881c_unprepare+0x38/0x88
drm_panel_unprepare+0xbc/0x108
This happens for panels that need to send MIPI-DSI commands in their
unprepare() callback. Since the MIPI-DSI interface is stopped at that
point, rzg2l_mipi_dsi_host_transfer() triggers the kernel panic.
Fix by moving rzg2l_mipi_dsi_stop() to new callback function
rzg2l_mipi_dsi_atomic_post_disable().
With this change we now have the correct power-down/stop sequence:
systemd-shutdown[1]: Rebooting.
rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_disable(): entry
ili9881c-dsi 10850000.dsi.0: ili9881c_unprepare(): entry
rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_post_disable(): entry
reboot: Restarting system
Suggested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260112154333.655352-1-hugo@hugovil.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Add MIPI DSI support for the Renesas RZ/V2H(P) SoC. Compared to the
RZ/G2L family, the RZ/V2H(P) requires dedicated D-PHY PLL programming,
different clock configuration, and additional timing parameter handling.
The driver introduces lookup tables and helpers for D-PHY timings
(TCLK*, THS*, TLPX, and ULPS exit) as specified in the RZ/V2H(P) hardware
manual. ULPS exit timing depends on the LPCLK rate and is now handled
explicitly.
The implementation also adds support for 16 bpp RGB format, updates the
clock setup path to use the RZ/V2H PLL divider limits, and provides new
.dphy_init, .dphy_conf_clks, and .dphy_startup_late_init callbacks to
match the RZ/V2H sequence.
With these changes, the RZ/V2H(P) can operate the MIPI DSI interface in
compliance with its hardware specification while retaining support for
existing RZ/G2L platforms.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251015192611.241920-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Since commit 94fe479fae ("drm/rcar-du: dsi: Clean up handling of DRM mode flags")
the driver does not set TXVMVPRMSET0R_VSPOL_LOW and TXVMVPRMSET0R_HSPOL_LOW
for modes which set neither DRM_MODE_FLAG_[PN].SYNC. The previous behavior
was to assume that neither flag means DRM_MODE_FLAG_N.SYNC . Restore the
previous behavior for maximum compatibility.
The change of behavior is visible below, consider Vertical mode->flags
for simplicity sake, although the same applies to Horizontal ones:
Before 94fe479fae ("drm/rcar-du: dsi: Clean up handling of DRM mode flags") :
- DRM_MODE_FLAG_PVSYNC => vprmset0r |= 0
- DRM_MODE_FLAG_NVSYNC => vprmset0r |= TXVMVPRMSET0R_VSPOL_LOW
- Neither DRM_MODE_FLAG_[PN]VSYNC => vprmset0r |= TXVMVPRMSET0R_VSPOL_LOW
After 94fe479fae ("drm/rcar-du: dsi: Clean up handling of DRM mode flags") :
- DRM_MODE_FLAG_PVSYNC => vprmset0r |= 0
- DRM_MODE_FLAG_NVSYNC => vprmset0r |= TXVMVPRMSET0R_VSPOL_LOW
- Neither DRM_MODE_FLAG_[PN]VSYNC => vprmset0r |= 0 <---------- This broke
The "Neither" case behavior is different, because DRM_MODE_FLAG_N[HV]SYNC is
really not equivalent !DRM_MODE_FLAG_P[HV]SYNC .
Fixes: 94fe479fae ("drm/rcar-du: dsi: Clean up handling of DRM mode flags")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20251202181146.138365-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Introduce TXVMVPRMSET0R_BPP_MASK macro and use FIELD_PREP() to generate
appropriate bitfield from mask and value without bitshift, assign this
value into vprmset0r. Remove TXVMVPRMSET0R_CSPC_RGB which is never used,
replace it with code comment next to TXVMVPRMSET0R_CSPC_YCbCr.
Replace (mode->flags & DRM_MODE_FLAG_P.SYNC) test with inverted conditional
(mode->flags & DRM_MODE_FLAG_N.SYNC) and bitwise orr vprmset0r with either
or both TXVMVPRMSET0R_HSPOL_LOW and TXVMVPRMSET0R_VSPOL_LOW if conditional
matches.
Do not convert bits and bitfields to BIT() and GENMASK() yet, to be
consisten with the current style. Conversion to BIT() and GENMASK()
macros is done at the very end of this series in the last two patches.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251028232959.109936-10-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cache DSI mode flags in new mode_flags member of struct rcar_mipi_dsi .
Configure TXVMSETR register based on the content of DSI mode flags in
case the controller operates in video mode.
Rename TXVMSETR_H..BPEN_EN to TXVMSETR_H..BPEN and drop TXVMSETR_H..BPEN_DIS
which resolves to 0. Update TXVMSETR_VSEN in the same manner. Replace
TXVMSETR_SYNSEQ_PULSES with a code comment next to TXVMSETR_SYNSEQ_EVENTS
because TXVMSETR_SYNSEQ_PULSES resolves to 0.
Do not convert bits and bitfields to BIT() and GENMASK() yet, to be
consisten with the current style. Conversion to BIT() and GENMASK()
macros is done at the very end of this series in the last two patches.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251028232959.109936-9-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Implement support for DSI command transfer. Transmission of both Short
Packet and Long Packet is implemented, so is command transmission to
request response from peripheral device and transmission of non-read
command with BTA.
The AXI memory access mode is currently not implemented, each transfer
is performed purely using controller register interface. Short Packet
transfer can transfer up to 2 Bytes of data, Long Packet transfer can
transfer up to 16 Bytes of data.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20250831190507.327848-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Remove fixed PPI lane count setup. The R-Car DSI host is capable
of operating in 1..4 DSI lane mode. Remove the hard-coded 4-lane
configuration from PPI register settings and instead configure
the PPI lane count according to lane count information already
obtained by this driver instance.
Configure TXSETR register to match PPI lane count. The R-Car V4H
Reference Manual R19UH0186EJ0121 Rev.1.21 section 67.2.2.3 Tx Set
Register (TXSETR), field LANECNT description indicates that the
TXSETR register LANECNT bitfield lane count must be configured
such, that it matches lane count configuration in PPISETR register
DLEN bitfield. Make sure the LANECNT and DLEN bitfields are
configured to match.
Fixes: 155358310f ("drm: rcar-du: Add R-Car DSI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250813210840.97621-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Introduce `dphy_conf_clks` and `dphy_mode_clk_check` callbacks in
`rzg2l_mipi_dsi_hw_info` to configure the VCLK and validate
supported display modes.
On the RZ/V2H(P) SoC, the DSI PLL dividers need to be as accurate as
possible. To ensure compatibility with both RZ/G2L and RZ/V2H(P) SoCs,
function pointers are introduced.
Modify `rzg2l_mipi_dsi_startup()` to use `dphy_conf_clks` for clock
configuration and `rzg2l_mipi_dsi_bridge_mode_valid()` to invoke
`dphy_mode_clk_check` for mode validation.
This change ensures proper operation across different SoC variants
by allowing fine-grained control over clock configuration and mode
validation.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-10-prabhakar.mahadev-lad.rj@bp.renesas.com
n preparation for adding support for the Renesas RZ/V2H(P) SoC, this patch
introduces a mechanism to pass SoC-specific information via OF data in the
DSI driver. This enables the driver to adapt dynamically to various
SoC-specific requirements without hardcoding configurations.
The MIPI DSI interface on the RZ/V2H(P) SoC is nearly identical to the one
on the RZ/G2L SoC. While the LINK registers are shared between the two
SoCs, the D-PHY registers differ. Also the VCLK range differs on both these
SoCs. To accommodate these differences `struct rzg2l_mipi_dsi_hw_info` is
introduced and as now passed as OF data.
These changes lay the groundwork for the upcoming RZ/V2H(P) SoC support by
allowing SoC-specific data to be passed through OF.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Update the RZ/G2L MIPI DSI driver to calculate HSFREQ using the actual
VCLK rate instead of the mode clock. The relationship between HSCLK and
VCLK is:
vclk * bpp <= hsclk * 8 * lanes
Retrieve the VCLK rate using `clk_get_rate(dsi->vclk)`, ensuring that
HSFREQ accurately reflects the clock rate set in hardware, leading to
better precision in data transmission.
Additionally, use `DIV_ROUND_CLOSEST_ULL` for a more precise division
when computing `hsfreq`. Also, update unit conversions to use correct
scaling factors for better clarity and correctness.
Since `clk_get_rate()` returns the clock rate in Hz, update the HSFREQ
threshold comparisons to use Hz instead of kHz to ensure correct behavior.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-4-prabhakar.mahadev-lad.rj@bp.renesas.com
devm_drm_bridge_alloc() is the new API to be used for allocating (and
partially initializing) a private driver struct embedding a struct
drm_bridge.
For many drivers having a simple code flow in the probe function, this
commit does a mass conversion automatically with the following semantic
patch. The changes have been reviewed manually for correctness as well as
to find any false positives.
The patch has been applied with the explicit exclusion of bridge/panel.c,
handled by a separate patch.
After applying the semantic patch, manually fixed these issues:
- 4 drivers need ERR_CAST() instead of PTR_ERR() as the function calling
devm_drm_bridge_alloc() returns a pointer
- re-added empty lines and comments that the script had removed but that
should stay
@@
type T;
identifier C;
identifier BR;
expression DEV;
expression FUNCS;
@@
-T *C;
+T *C;
...
(
-C = devm_kzalloc(DEV, ...);
-if (!C)
- return -ENOMEM;
+C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS);
+if (IS_ERR(C))
+ return PTR_ERR(C);
|
-C = devm_kzalloc(DEV, ...);
-if (!C)
- return ERR_PTR(-ENOMEM);
+C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS);
+if (IS_ERR(C))
+ return PTR_ERR(C);
)
...
-C->BR.funcs = FUNCS;
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com> # microchip-lvds.c
Reviewed-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640
Tested-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-2-b8bc1f16d7aa@bootlin.com
[Luca: fixed trivial patch conflict in adv7511_drv.c while applying]
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This patch is based on the commit 73eb5476df ("drm: rcar-du: Support
panels connected directly to the DPAD outputs").
The RZ DU driver assumes that a bridge is always connected to the DU
output. This is valid for the HDMI output, but the DPAD output can be
connected directly to a panel, in which case no bridge is available.
To support this use case, detect whether the entities connected to the DU
DPAD output is encoders or panels based on the number of ports of their DT
node, and retrieve the corresponding type of DRM objects. For panels,
additionally create panel bridge instances.
Signed-off-by: hienhuynh <hien.huynh.px@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250508095042.25164-1-biju.das.jz@bp.renesas.com
The RZ/G2L driver utilises the VSPD to read data from input sources.
The rzg2l_du_kms component lists a restricted subset of the capabilities
of the VSPD which prevents additional formats from being used for
display planes.
The supported display plane formats are mapped in rzg2l_du_vsp_formats[].
Extend the rzg2l_du_format_infos[] table with the corresponding mappings
between the supported DRM formats and the formats exposed by the VSP in
rzg2l_du_vsp_formats, maintaining the same ordering in both tables.
The RPF module on VSPD supports various format conversion and send the
image data to BRS(Blend ROP Sub Unit) for further processing.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250330102357.56010-3-biju.das.jz@bp.renesas.com
