clangd reports many "unused header" warnings throughout the Xe driver.
Start working to clean this up by removing unnecessary includes in our
.c files and/or replacing them with explicit includes of other headers
that were previously being included indirectly.
By far the most common offender here was unnecessary inclusion of
xe_gt.h. That likely originates from the early days of xe.ko when
xe_mmio did not exist and all register accesses, including those
unrelated to GTs, were done with GT functions.
There's still a lot of additional #include cleanup that can be done in
the headers themselves; that will come as a followup series.
v2:
- Squash the 79-patch series down to a single patch. (MattB)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260115032803.4067824-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Add xe_gt_recovery_pending helper.
This helper serves as the singular point to determine whether a GT
recovery is currently in progress. Expected callers include the GuC CT
layer and the GuC submission layer. Atomically visable as soon as vCPU
are unhalted until VF recovery completes.
v3:
- Add GT layer xe_gt_recovery_inprogress (Michal)
- Don't blow up in memirq not enabled (CI)
- Add __memirq_received with clear argument (Michal)
- xe_memirq_sw_int_0_irq_pending rename (Michal)
- Use offset in xe_memirq_sw_int_0_irq_pending (Michal)
v4:
- Refactor xe_gt_recovery_inprogress logic around memirq (Michal)
v5:
- s/inprogress/pending (Michal)
v7:
- Fix typos, adjust comment (Michal)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-9-matthew.brost@intel.com
To properly support VF Save/Restore procedure, fixups need to be
applied after PF driver finishes its part of VF Restore. The fixups
are required to adjust the ongoing execution for a hardware switch
that happened, because some GFX resources are not fully virtualized,
and assigned to a VF as range from a global pool. The VF on which
a VM is restored will often have different ranges provisioned than
the VF on which save process happened. Those resource fixups are
applied by the VF driver within a restored VM.
A VF driver gets informed that it was migrated by receiving an
interrupt from each GuC. The interrupt assigned for that purpose
is "GUC SW interrupt 0". Seeing that fields set from within the
irq handler should be the trigger for fixups.
The VF can safely do post-migration fixups on resources associated
to each GuC only after that GuC issued the MIGRATED interrupt.
This change introduces a worker to be used for post-migration fixups,
and a mechanism to schedule said worker when all GuCs sent the irq.
v2: renamed and moved functions, updated logged messages, removed
unused includes, used anon struct (Michal)
v3: ordering, kerneldoc, asserts, debug messages,
on_all_tiles -> on_all_gts (Michal)
v4: fixed missing header include
v5: Explained what fixups are, explained which IRQ is used, style
fixes (Michal)
Bspec: 50868
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-2-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Both xe_memirq_{source,status}_ptr functions are now strictly for
obtaining an address of the memory based interrupt report pages
used by the HW engines. When initializing the GuC that does not
require special per instance page preparation, we don't need to
abuse these public functions and pass a NULL instead of valid hwe
pointer. Also, without further fixes, this actually may lead to
NPD crash once the hw_reports_to_instance_zero() will be true.
Add internal helpers that will provide report page addresses based
solely on the instance number, which will be always 0 for both GuCs.
Fixes: ef6103d20f ("drm/xe: memirq infra changes for MSI-X")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Ilia Levi <ilia.levi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240925084445.1495-1-michal.wajdeczko@intel.com
When using MSI-X, hw engines report interrupt status and source to engine
instance 0. For this scenario, in order to differentiate between the
engines, we need to pass different status/source pointers in the LRC.
The requirements on those pointers are:
- Interrupt status should be 4KiB aligned
- Interrupt source should be 64 bytes aligned
To accommodate this, we duplicate the current memirq page layout -
allocating a page for each engine instance and pass this page in the LRC.
Note that the same page can be reused for different engine types.
For example, an LRC executing on CCS #x will have pointers to page #x,
and an LRC executing on BCS #x will have the same pointers. Thus, to
locate the proper page, the pointer accessors were modified to receive
the hw engine.
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918053942.1331811-5-illevi@habana.ai
The flags stored in the BO grew over time without following
much a naming pattern. First of all, get rid of the _BIT suffix that was
banned from everywhere else due to the guideline in
drivers/gpu/drm/i915/i915_reg.h that xe kind of follows:
Define bits using ``REG_BIT(N)``. Do **not** add ``_BIT`` suffix to the name.
Here the flags aren't for a register, but it's good practice to keep it
consistent.
Second divergence on names is the use or not of "CREATE". This is
because most of the flags are passed to xe_bo_create*() family of
functions, changing its behavior. However, since the flags are also
stored in the bo itself and checked elsewhere in the code, it seems
better to just omit the CREATE part.
With those 2 guidelines, all the flags are given the form
XE_BO_FLAG_<FLAG_NAME> with the following commands:
git grep -le "XE_BO_" -- drivers/gpu/drm/xe | xargs sed -i \
-e "s/XE_BO_\([_A-Z0-9]*\)_BIT/XE_BO_\1/g" \
-e 's/XE_BO_CREATE_/XE_BO_FLAG_/g'
git grep -le "XE_BO_" -- drivers/gpu/drm/xe | xargs sed -i -r \
-e 's/XE_BO_(DEFER_BACKING|SCANOUT|FIXED_PLACEMENT|PAGETABLE|NEEDS_CPU_ACCESS|NEEDS_UC|INTERNAL_TEST|INTERNAL_64K|GGTT_INVALIDATE)/XE_BO_FLAG_\1/g'
And then the defines in drivers/gpu/drm/xe/xe_bo.h are adjusted to
follow the coding style.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322142702.186529-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
