Drop the Asus UX550* touchscreen ignore battery quirks, there is a blanket
HID_BATTERY_QUIRK_IGNORE for all USB_VENDOR_ID_ELAN USB touchscreens now,
so these are just a duplicate of those.
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
XG mobile station 2022 has a different PID than the 2023 model: add it
that model to hid-asus.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
XG mobile stations have the 0x5a endpoint and has to be initialized:
add them to hid-asus.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch adds the dongle device IDs for the CRKD Gibson SG
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This commit adds support for the PDP Jaguar and MadCatz Stratocaster.
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This commit adds support for the PDP RiffMaster and the CRKD Gibson SG
in both their PS4 and PS5 modes.
These devices aren't mapped correctly without these changes, they also
lack support for their whammy and tilt functionality which this patch
adds support for by binding them to the left and right triggers.
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Lenovo Yoga Book 9i is a dual-screen laptop, with a single composite
USB device providing both touch and tablet interfaces for both screens.
All inputs report through a single device, differentiated solely by report
numbers. As there is no way for udev to differentiate the inputs based on
USB vendor/product ID or interface numbers, custom naming is required to
match against for downstream configuration. A firmware bug also results
in an erroneous InRange message report being received after the stylus
leaves proximity, blocking later touch events. Add required quirks for
Gen 8 to Gen 10 models, including a new quirk providing for custom input
device naming and dropping erroneous InRange reports.
Signed-off-by: Brian Howard <blhoward2@gmail.com>
Tested-by: Brian Howard <blhoward2@gmail.com>
Tested-by: Kris Fredrick <linux.baguette800@slmail.me>
Reported-by: Andrei Shumailov <gentoo1993@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220386
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch adds support for handling the side buttons
on the RAPOO 0x2015 wireless mouse. These buttons were
previously not generating input events due to missing
driver logic.
The new code handles raw HID input report with Report
ID 1 and maps the side buttons to KEY_BACK and KEY_FORWARD
using the input subsystem.
Tested on a RAPOO mouse with USB ID 24AE:2015.
Signed-off-by: Nguyen Dinh Dang Duong <dangduong31205@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The USB speaker has a bug that causes it to reboot when changing the
brightness using the physical knob.
Add a new vendor and product ID entry in hid-ids.h, and register
the corresponding device in hid-quirks.c with the required quirk.
Signed-off-by: Rodrigo Lugathe da Conceição Alves <lugathe2@gmail.com>
Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Another Chicony Electronics HP 5MP Camera with USB ID 04F2:B882
reports a HID sensor interface that is not actually implemented.
Add the device to the HID ignore list so the bogus sensor is never
exposed to userspace. Then the system won't hang when runtime PM
tries to wake the unresponsive device.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
- Support for Logitech G Pro X Superlight 2 receiver (Nathan Rossi)
- Fix for retry logic in hidpp_send_message_sync() (Mavroudis Chatzilazaridis)
- Support for new Lighspeed receiver version (Mavroudis Chatzilazaridis)
- Support for Logitech G13 (Leo L. Schwab)
- Backlight support improvement for Logitech G510 (Hans de Goede)
The mouse portion of the device's Report Descriptor declares 5 buttons but only
declares 3 usages (Button 1 through Button 3). As a result events for the 2
side buttons are not generated.
Detect and repair the Report Descriptor if necessary by changing the Usage
Maximum value from Button 3 to Button 5.
[jkosina@suse.com: standardize changelog a little bit]
Reported-by: Artem <temabiill@gmail.com>
Closes: https://lore.kernel.org/all/CADYkRmrfhRf6VmQjc+su+mepyv=TsHc+aMcL6ryRZ5HTZ8pyFg@mail.gmail.com/
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Tested-by: Artem <temabiill@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Logitech G Pro X Superlight 2 has a lightspeed receiver with a
product id of 0xc54d, this receiver behaves like the receiver used in
the original Logitech G Pro X Superlight (id 0xc547) including the 13
byte mouse reports.
This change adds a definition for this receiver id, and a mapping for
the recvr_type_gaming_hidpp_ls_1_3 type. With this change in place the
receiver now reports the battery status of the connected mouse over
wireless as well as exposing the HID interface needed for userspace to
perform additional configuration with libratbag/Piper.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The ELECOM M-XT3URBK trackball has an additional device ID (0x018F), which
shares the same report descriptor as the existing device (0x00FB). However,
the driver does not currently recognize this new ID, resulting in only five
buttons being functional.
This patch adds the new device ID so that all six buttons work properly.
Signed-off-by: Naoki Ueki <naoki25519@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The keyboard of this device has the following in its report description
for Usage (Keyboard) in Collection (Application):
# 0x15, 0x00, // Logical Minimum (0) 52
# 0x25, 0x65, // Logical Maximum (101) 54
# 0x05, 0x07, // Usage Page (Keyboard) 56
# 0x19, 0x00, // Usage Minimum (0) 58
# 0x29, 0xdd, // Usage Maximum (221) 60
# 0x81, 0x00, // Input (Data,Arr,Abs) 62
Since the Usage Min/Max range exceeds the Logical Min/Max range,
keypresses outside the Logical range are not recognized. This includes,
for example, the Japanese language keyboard variant's keys for |, _ and
\.
Fixup the report description to make the Logical range match the Usage
range, fixing the interpretation of keypresses above 101 on this device.
Signed-off-by: Lauri Tirkkonen <lauri@hacktheplanet.fi>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Based on available evidence, the USB ID 4c4a:4155 used by multiple
devices has been attributed to Jieli. The commit 1a8953f4f7
("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY") affected touchscreen
functionality. Added checks for manufacturer and serial number to
maintain microphone compatibility, enabling both devices to function
properly.
[jkosina@suse.com: edit shortlog]
Fixes: 1a8953f4f7 ("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY")
Cc: stable@vger.kernel.org
Tested-by: staffan.melin@oscillator.se
Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The tablet is similar to the 22R Pro, but with a few annoying
differences. Its descriptors are bigger because of the tablet's split
coordinate system, I guess it's just that large. Thankfully, this is
easy enough to support as all we have to do is shift bytes around.
To help code re-use, I changed the signature of
uclogic_params_init_ugee_xppen_pro to accept a pen descriptor so we
didn't create yet-another initialization function.
I have been testing this locally for a month or so and it works great,
and also corroborated this with a few other testers. Since this touches
my 22R Pro code, I have tested and checked that it didn't regress that
device.
Signed-off-by: Joshua Goins <josh@redstrate.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This lightspeed receiver uses 13 byte mouse reports without an ID.
There are 5 additional vendor defined bytes appended to the report.
The workaround for such cases has been adjusted to handle these larger
reports.
The keyboard reports have a distinct layout with differing minimums and
maximums. Additionally, the LED reports now require a report ID of 1.
New keyboard and mouse descriptors have been added to reflect these
changes.
The devices attached to this receiver now report the status of their
battery in wireless mode, libratbag communicates with them and they can
be configured with Piper.
Fixes: 9d1bd93462 ("HID: logitech-dj: Add support for a new lightspeed receiver iteration")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218172
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218094
Co-developed-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Tested-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch adds ALWAYS_POLL quirk for the VRS R295 steering wheel joystick.
This device reboots itself every 8-10 seconds if it is not polled.
Signed-off-by: Oleg Makarenko <oleg@makarenk.ooo>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Cooler Master Mice Dongle includes a vendor defined HID interface
alongside its mouse interface. Not polling it will cause the mouse to
stop responding to polls on any interface once woken up again after
going into power saving mode.
Add the HID_QUIRK_ALWAYS_POLL quirk alongside the Cooler Master VID and
the Dongle's PID.
Signed-off-by: Tristan Lobb <tristan.lobb@it-lobb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Logitech G13 is a gaming keypad with general-purpose macro keys,
four LED-backlit macro preset keys, five "menu" keys, backlight toggle
key, an analog thumbstick, RGB LED backlight, and a monochrome LCD
display.
Support input event generation for all keys and the thumbstick, and
expose all LEDs.
Signed-off-by: Leo L. Schwab <ewhac@ewhac.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Tested-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Asus Z13 folio has a multitouch touchpad that needs to bind
to the hid-multitouch driver in order to work properly. So bind
it to the HID_GROUP_GENERIC group to release the touchpad and
move it to the bottom so that the comment applies to it.
While at it, change the generic KEYBOARD3 name to Z13_FOLIO.
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Legion Go features detachable controllers which support a dual
dinput mode. In this mode, the controllers appear under a single HID
device with two applications.
Currently, both controllers appear under the same event device, causing
their controls to be mixed up. This patch separates the two so that
they can be used independently.
In addition, the latest firmware update for the Legion Go swaps the IDs
to the ones used by the Legion Go 2, so add those IDs as well.
[jkosina@suse.com: improved shortlog]
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The DT2DRBK trackball has 8 buttons, but the report descriptor only
specifies 5. This patch adds the device ID and performs a similar fixup as
for other ELECOM devices to enable the remaining 3 buttons.
Signed-off-by: Martin Hilgendorf <martin.hilgendorf@posteo.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Adds support for the G PRO 2 LIGHTSPEED Wireless via it's nano receiver
or directly. This nano receiver appears to work identically to the 1_1
receiver for the case I've verified, which is the battery status through
lg-hidpp.
The same appears to be the case wired, sharing much with the Pro X
Superlight 2; differences seemed to lie in userland configuration rather
than in interfaces used by hid_logitech_hidpp on the kernel side.
I verified the sysfs interface for battery charge/discharge status, and
capacity read to be working on my 910-007290 device (white).
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
steelseries_srws1_probe() still does not use devm_kzalloc() and
devm_led_classdev_register(), so there is a lot of code to safely manage
heap, which reduces readability and may cause memory leaks due to minor
patch mistakes in the future.
Therefore, it should be changed to use devm_kzalloc() and
devm_led_classdev_register() to easily and safely manage heap.
Also, the current steelseries driver mainly checks sd->quriks to determine
which product a specific HID device is, which is not the correct way.
remove(), unlike probe(), does not receive struct hid_device_id as an
argument, so it must check hdev unconditionally to know which product
it is.
However, since struct steelseries_device and struct steelseries_srws1_data
have different structures, if SRWS1 is removed in remove(), converts
hdev->dev, which is initialized to struct steelseries_srws1_data,
to struct steelseries_device and uses it. This causes various
memory-related bugs as completely unexpected values exist in member
variables of the structure.
Therefore, in order to modify probe() and remove() to work properly,
Arctis 1, 9 should be added to HID_USB_DEVICE and some functions should be
modified to check hdev->product when determining HID device product.
Fixes: a0c76896c3 ("HID: steelseries: Add support for Arctis 1 XBox")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
- fix for potential NULL pointer dereference in hid-apple that could be caused
by malicious device with APPLE_MAGIC_BACKLIGHT quirk present triggering
overflow in data field (Qasim Ijaz)
- third party trackpart support for MacBookPro15,1 (Aditya Garg)
- Apple Magic Keyboard A311[89] USB-C support (Aditya Garg, Grigorii Sokolik)
The ELECOM M-HT1DRBK trackball has an additional device ID (056E:019B)
not yet recognized by the driver, despite using the same report
descriptor as earlier variants. This patch adds the new ID and applies
the same fixups, enabling all 8 buttons to function properly.
Signed-off-by: Leonard Dizon <leonard@snekbyte.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Adds support for the XP-PEN Artist 22R Pro, including stylus, tablet frame
and pen pressure.
The tablet has 20 buttons, but need to be remapped in order since the
device reports invalid keycodes. Existing tablet functionality should
not be inhibited, as BTN0-8 is still used.
New initialization functions are added since the device differs slightly
from other UGEE v2 devices.
Signed-off-by: Joshua Goins <josh@redstrate.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add "Thinkpad X1 Tablet Gen 2 Keyboard" PID to hid-lenovo driver to fix trackpoint not working issue.
Signed-off-by: Akira Inoue <niyarium@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
MARTLINKTECHNOLOGY is a microphone device, when the HID interface in an
audio device is requested to get specific report id, the following error
may occur.
[ 562.939373] usb 1-1.4.1.2: new full-speed USB device number 21 using xhci_hcd
[ 563.104908] usb 1-1.4.1.2: New USB device found, idVendor=4c4a, idProduct=4155, bcdDevice= 1.00
[ 563.104910] usb 1-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 563.104911] usb 1-1.4.1.2: Product: USB Composite Device
[ 563.104912] usb 1-1.4.1.2: Manufacturer: SmartlinkTechnology
[ 563.104913] usb 1-1.4.1.2: SerialNumber: 20201111000001
[ 563.229499] input: SmartlinkTechnology USB Composite Device as /devices/pci0000:00/0000:00:07.1/0000:04:00.3/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.2/1-1.4.1.2:1.2/0003:4C4A:4155.000F/input/input35
[ 563.291505] hid-generic 0003:4C4A:4155.000F: input,hidraw2: USB HID v2.01 Keyboard [SmartlinkTechnology USB Composite Device] on usb-0000:04:00.3-1.4.1.2/input2
[ 563.291557] usbhid 1-1.4.1.2:1.3: couldn't find an input interrupt endpoint
[ 568.506654] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 573.626656] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 578.746657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 583.866655] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 588.986657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
Ignore HID interface. The device is working properly.
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C)
report a HID sensor interface that is not actually implemented.
Attempting to access this non-functional sensor via iio_info causes
system hangs as runtime PM tries to wake up an unresponsive sensor.
Add these 2 devices to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some third party trackpad replacements like that of HAWSON may have a
different PID than the stock trackpad. This commit adds one such trackpad
to hid-apple, available for MacBookPro15,1
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add Apple Magic Keyboard 2024 with Touch ID and Numeric Keypad device ID
(05ac:0322) to those recognized by the hid-apple driver. Keyboard is
otherwise compatible with the existing implementation for its earlier
2021 model.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add Apple Magic Keyboard 2024 with Touch ID device ID (05ac:0321) to
those recognized by the hid-apple driver. Keyboard is otherwise
compatible with the existing implementation for its earlier 2021 model.
Signed-off-by: Grigorii Sokolik <g.sokol99@g-sokol.info>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch adds HID_QUIRK_ALWAYS_POLL for the ADATA XPG wireless gaming mouse (USB ID 125f:7505) and its USB dongle (USB ID 125f:7506). Without this quirk, the device does not generate input events properly.
Signed-off-by: Milton Barrera <miltonjosue2001@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch adds support for USB-C model of Apple Magic Mouse 2.
Except for the hardware ID, it should resemble the existing configuration
for the older Magic Mouse 2.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
From: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
This patch series is focused on improving the compatibility and usability of the
hid-pidff force feedback driver. Last patch introduces a new, universal driver
for PID devices that need some special handling like report fixups, remapping the
button range, managing new pidff quirks and setting desirable fuzz/flat values.
This work has been done in the span of the past months with the help of the great
Linux simracing community, with a little input from sim flight fans from FFBeast.
No changes interfere with compliant and currently working PID devices.
"Generic" codepath was tested as well with Moza and Simxperience AccuForce v2.
I'm not married to the name. It's what we used previously, but if "universal" is
confusing (pidff is already the generic driver), we can come up with something
better like "hid-quirky-pidff" :)
With v8 and tiny finx in v9, all the outstanding issues were resolved,
additional pidff issues were fixed and hid-pidff defines moved to a dedicated
header file. This patch series could be considered done bar any comments and
requests from input maintainers.
I could save more then a dozen lines of code by changing simple if statements
to only occupy on line instead of two in there's a need for that.
Adds Asetek vendor id and product ids for:
- Invicta
- Forte
- La Prima
- Tony Kanaan
v2:
- Misc spelling fix in driver loaded info
v3:
- Chanage Oleg's name order
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
