Pull iommu updates from Joerg Roedel:
"Core changes:
- Rust bindings for IO-pgtable code
- IOMMU page allocation debugging support
- Disable ATS during PCI resets
Intel VT-d changes:
- Skip dev-iotlb flush for inaccessible PCIe device
- Flush cache for PASID table before using it
- Use right invalidation method for SVA and NESTED domains
- Ensure atomicity in context and PASID entry updates
AMD-Vi changes:
- Support for nested translations
- Other minor improvements
ARM-SMMU-v2 changes:
- Configure SoC-specific prefetcher settings for Qualcomm's "MDSS"
ARM-SMMU-v3 changes:
- Improve CMDQ locking fairness for pathetically small queue sizes
- Remove tracking of the IAS as this is only relevant for AArch32 and
was causing C_BAD_STE errors
- Add device-tree support for NVIDIA's CMDQV extension
- Allow some hitless transitions for the 'MEV' and 'EATS' STE fields
- Don't disable ATS for nested S1-bypass nested domains
- Additions to the kunit selftests"
* tag 'iommu-updates-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommupt: Always add IOVA range to iotlb_gather in gather_range_pages()
iommu/amd: serialize sequence allocation under concurrent TLB invalidations
iommu/amd: Fix type of type parameter to amd_iommufd_hw_info()
iommu/arm-smmu-v3: Do not set disable_ats unless vSTE is Translate
iommu/arm-smmu-v3-test: Add nested s1bypass/s1dssbypass coverage
iommu/arm-smmu-v3: Mark EATS_TRANS safe when computing the update sequence
iommu/arm-smmu-v3: Mark STE MEV safe when computing the update sequence
iommu/arm-smmu-v3: Add update_safe bits to fix STE update sequence
iommu/arm-smmu-v3: Add device-tree support for CMDQV driver
iommu/tegra241-cmdqv: Decouple driver from ACPI
iommu/arm-smmu-qcom: Restore ACTLR settings for MDSS on sa8775p
iommu/vt-d: Fix race condition during PASID entry replacement
iommu/vt-d: Clear Present bit before tearing down context entry
iommu/vt-d: Clear Present bit before tearing down PASID entry
iommu/vt-d: Flush piotlb for SVM and Nested domain
iommu/vt-d: Flush cache for PASID table before using it
iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode
iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable mode
rust: iommu: fix `srctree` link warning
rust: iommu: fix Rust formatting
...
request_threaded_irq() is invoked with a primary and a secondary handler
and no flags are passed. The primary handler is the same as
irq_default_primary_handler() so there is no need to have an identical
copy.
The lack of the IRQF_ONESHOT can be dangerous because the interrupt
source is not masked while the threaded handler is active. This means,
especially on LEVEL typed interrupt lines, the interrupt can fire again
before the threaded handler had a chance to run.
Use the default primary interrupt handler by specifying NULL and set
IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: 72fe00f01f ("x86/amd-iommu: Use threaded interupt handler")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-4-bigeasy@linutronix.de
Introduce the amd_iommu_set_dte_v1() helper function to configure
IOMMU host (v1) page table into DTE. This will be used later
when attaching nested doamin.
Also, remove obsolete warning when SNP is enabled and domain id
is zero since this check is no longer applicable.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
To help avoid duplicate logic when programing DTE for nested translation.
Note that this commit changes behavior of when the IOMMU driver is
switching domain during attach and the blocking domain, where DTE bit
fields for interrupt pass-through (i.e. Lint0, Lint1, NMI, INIT, ExtInt)
and System management message could be affected. These DTE bits are
specified in the IVRS table for specific devices, and should be persistent.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The nested domain is allocated with IOMMU_DOMAIN_NESTED type to store
stage-1 translation (i.e. GVA->GPA). This includes the GCR3 root pointer
table along with guest page tables. The struct iommu_hwpt_amd_guest
contains this information, and is passed from user-space as a parameter
of the struct iommu_ops.domain_alloc_nested().
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Which includes DTE update, clone_aliases, DTE flush and completion-wait
commands to avoid code duplication when reuse to setup DTE for nested
translation.
Also, make amd_iommu_update_dte() non-static to reuse in
in a new nested.c file for nested translation.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
So that both iommu.c and init.c can utilize them. Also define a new
function 'pdom_id_destroy()' to destroy 'pdom_ids' instead of directly
calling ida functions.
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Replace the io_pgtable versions with pt_iommu versions. The v2 page table
uses the x86 implementation that will be eventually shared with VT-d.
This supports the same special features as the original code:
- increase_top for the v1 format to allow scaling from 3 to 6 levels
- non-present flushing
- Dirty tracking for v1 only
- __sme_set() to adjust the PTEs for CC
- Optimization for flushing with virtualization to minimize the range
- amd_iommu_pgsize_bitmap override of the native page sizes
- page tables allocate from the device's NUMA node
Rework the domain ops so that v1/v2 get their own ops. Make dedicated
allocation functions for v1 and v2. Hook up invalidation for a top change
to struct pt_iommu_flush_ops. Delete some of the iopgtable related code
that becomes unused in this patch. The next patch will delete the rest of
it.
This fixes a race bug in AMD's increase_address_space() implementation. It
stores the top level and top pointer in different memory, which prevents
other threads from reading a coherent version:
increase_address_space() alloc_pte()
level = pgtable->mode - 1;
pgtable->root = pte;
pgtable->mode += 1;
pte = &pgtable->root[PM_LEVEL_INDEX(level, address)];
The iommupt version is careful to put mode and root under a single
READ_ONCE and then is careful to only READ_ONCE a single time per
walk.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Rearrange initial setup of AMD IOMMU debugfs to segregate per IOMMU
setup and setup which is common for all IOMMUs. This ensures that common
debugfs paths (introduced in subsequent patches) are created only once
instead of being created for each IOMMU.
With the change, there is no need to use lock as amd_iommu_debugfs_setup()
will be called only once during AMD IOMMU initialization. So remove lock
acquisition in amd_iommu_debugfs_setup().
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-2-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
Current AMD IOMMU assumes Host Address Translation (HAT) is always
supported, and Linux kernel enables this capability by default. However,
in case of emulated and virtualized IOMMU, this might not be the case.
For example,current QEMU-emulated AMD vIOMMU does not support host
translation for VFIO pass-through device, but the interrupt remapping
support is required for x2APIC (i.e. kvm-msi-ext-dest-id is also not
supported by the guest OS). This would require the guest kernel to boot
with guest kernel option iommu=pt to by-pass the initialization of
host (v1) table.
The AMD I/O Virtualization Technology (IOMMU) Specification Rev 3.10 [1]
introduces a new flag 'HATDis' in the IVHD 11h IOMMU attributes to indicate
that HAT is not supported on a particular IOMMU instance.
Therefore, modifies the AMD IOMMU driver to detect the new HATDis
attributes, and disable host translation and switch to use guest
translation if it is available. Otherwise, the driver will disable DMA
translation.
[1] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/specifications/48882_IOMMU.pdf
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Ankit Soni <Ankit.Soni@amd.com>
Link: https://lore.kernel.org/r/8109b208f87b80e400c2abd24a2e44fcbc0763a5.1749016436.git.Ankit.Soni@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
AMD IOMMU reserves the address range 0xfd00000000-0xffffffffff for
the hypertransport protocol (HT) and has special meaning. Hence devices
cannot use this address range for the DMA. However on some AMD platforms
this HT range is shifted to the very top of the address space and new
feature bit `HTRangeIgnore` is introduced. When this feature bit is on,
IOMMU treats the GPA access to the legacy HT range as regular GPA access.
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250317055020.25214-1-sarunkod@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The only thing that uses the nid is the io_pgtable code, and it should be
set before calling alloc_io_pgtable_ops() to ensure that the top levels
are allocated on the correct nid.
Since dev is never NULL now we can just do this trivially and remove the
other uses of nid. SVA and identity code paths never use it since they
don't use io_pgtable.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v2-9776c53c2966+1c7-amd_paging_flags_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
do_iommu_domain_alloc() is only called from
amd_iommu_domain_alloc_paging_flags() so type is always
IOMMU_DOMAIN_UNMANAGED. Remove type and all the dead conditionals checking
it.
IOMMU_DOMAIN_IDENTITY checks are similarly obsolete as the conversion to
the global static identity domain removed those call paths.
The caller of protection_domain_alloc() should set the type, fix the miss
in the SVA code.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v2-9776c53c2966+1c7-amd_paging_flags_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Also, the set_dte_entry() is used to program several DTE fields (e.g.
stage1 table, stage2 table, domain id, and etc.), which is difficult
to keep track with current implementation.
Therefore, separate logic for clearing DTE (i.e. make_clear_dte) and
another function for setting up the GCR3 Table Root Pointer, GIOV, GV,
GLX, and GuestPagingMode into another function set_dte_gcr3_table().
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20241118054937.5203-6-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To support domain replacement for pasid, the underlying iommu driver needs
to know the old domain hence be able to clean up the existing attachment.
It would be much convenient for iommu layer to pass down the old domain.
Otherwise, iommu drivers would need to track domain for pasids by
themselves, this would duplicate code among the iommu drivers. Or iommu
drivers would rely group->pasid_array to get domain, which may not always
the correct one.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-2-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add two new kernel command line parameters to limit the page-sizes
used for v1 page-tables:
nohugepages - Limits page-sizes to 4KiB
v2_pgsizes_only - Limits page-sizes to 4Kib/2Mib/1GiB; The
same as the sizes used with v2 page-tables
This is needed for multiple scenarios. When assigning devices to
SEV-SNP guests the IOMMU page-sizes need to match the sizes in the RMP
table, otherwise the device will not be able to access all shared
memory.
Also, some ATS devices do not work properly with arbitrary IO
page-sizes as supported by AMD-Vi, so limiting the sizes used by the
driver is a suitable workaround.
All-in-all, these parameters are only workarounds until the IOMMU core
and related APIs gather the ability to negotiate the page-sizes in a
better way.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240905072240.253313-1-joro@8bytes.org
We already have memory in the union here that is being wasted in AMD's
case, use it to store the nid.
Putting the nid here further isolates the io_pgtable code from the struct
protection_domain.
Fixup protection_domain_alloc so that the NID from the device is provided,
at this point dev is never NULL for AMD so this will now allocate the
first table pointer on the correct NUMA node.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/8-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Looks like many refactorings here have left this confused. There is only
one storage of the root/mode, it is in the iop struct.
increase_address_space() calls amd_iommu_domain_set_pgtable() with values
that it already stored in iop a few lines above.
amd_iommu_domain_clr_pt_root() is zero'ing memory we are about to free. It
used to protect against a double free of root, but that is gone now.
Remove amd_iommu_domain_set_pgtable(), amd_iommu_domain_set_pt_root(),
amd_iommu_domain_clr_pt_root() as they are all pointless.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD driver uses amd_iommu_domain_flush_complete() function to make sure
IOMMU processed invalidation commands before proceeding. Ideally this
should be called from functions which updates DTE/invalidates caches.
There is no need to call this function explicitly. This patches makes
below changes :
- Rename amd_iommu_domain_flush_complete() -> domain_flush_complete()
and make it as static function.
- Rearrage domain_flush_complete() to avoid forward declaration.
- Update amd_iommu_update_and_flush_device_table() to call
domain_flush_complete().
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240828111029.5429-7-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This includes :
- Add data structure to track per protection domain dev/pasid binding details
protection_domain->dev_data_list will track attached list of
dev_data/PASIDs.
- Move 'to_pdomain()' to header file
- Add iommu_sva_set_dev_pasid(). It will check whether PASID is supported
or not. Also adds PASID to SVA protection domain list as well as to
device GCR3 table.
- Add iommu_ops.remove_dev_pasid support. It will unbind PASID from
device. Also remove pasid data from protection domain device list.
- Add IOMMU_SVA as dependency to AMD_IOMMU driver
For a given PASID, iommu_set_dev_pasid() will bind all devices to same
SVA protection domain (1 PASID : 1 SVA protection domain : N devices).
This protection domain is different from device protection domain (one
that's mapped in attach_device() path). IOMMU uses domain ID for caching,
invalidation, etc. In SVA mode it will use per-device-domain-ID. Hence in
invalidation path we retrieve domain ID from gcr3_info_table structure and
use that for invalidation.
Co-developed-by: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-14-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Return success from enable_feature(IOPF) path as this interface is going
away. Instead we will enable/disable IOPF support in attach/detach device
path.
In attach device path, if device is capable of PRI, then we will add it to
per IOMMU IOPF queue and enable PPR support in IOMMU. Also it will
attach device to domain even if it fails to enable PRI or add device to
IOPF queue as device can continue to work without PRI support.
In detach device patch it follows following sequence:
- Flush the queue for the given device
- Disable PPR support in DTE[devid]
- Remove device from IOPF queue
- Disable device PRI
Also add IOMMU_IOPF as dependency to AMD_IOMMU driver.
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-13-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD IOMMU hardware supports PCI Peripheral Paging Request (PPR) using
a PPR log, which is a circular buffer containing requests from downstream
end-point devices.
There is one PPR log per IOMMU instance. Therefore, allocate an iopf_queue
per IOMMU instance during driver initialization, and free the queue during
driver deinitialization.
Also rename enable_iommus_v2() -> enable_iommus_ppr() to reflect its
usage. And add amd_iommu_gt_ppr_supported() check before enabling PPR
log.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-10-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit eda8c2860a ("iommu/amd: Enable device ATS/PASID/PRI capabilities
independently") changed the way it enables device capability while
attaching devices. I missed to account the attached domain capability.
Meaning if domain is not capable of handling PASID/PRI (ex: paging
domain with v1 page table) then enabling device feature is not required.
This patch enables PASID/PRI only if domain is capable of handling SVA.
Also move pci feature enablement to do_attach() function so that we make
SVA capability in one place. Finally make PRI enable/disable functions as
static functions.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-9-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In preparation to subsequent PPR-related patches, and also remove static
declaration for certain helper functions so that it can be reused in other
files.
Also rename below functions:
alloc_ppr_log -> amd_iommu_alloc_ppr_log
iommu_enable_ppr_log -> amd_iommu_enable_ppr_log
free_ppr_log -> amd_iommu_free_ppr_log
iommu_poll_ppr_log -> amd_iommu_poll_ppr_log
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel IOMMU code currently tries to allocate all DMAR fault interrupt
vectors on the boot cpu. On large systems with high DMAR counts this
results in vector exhaustion, and most of the vectors are not initially
allocated socket local.
Instead, have a cpu on each node do the vector allocation for the DMARs on
that node. The boot cpu still does the allocation for its node during its
boot sequence.
Signed-off-by: Dimitri Sivanich <sivanich@hpe.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/Zfydpp2Hm+as16TY@hpe.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull iommu updates from Joerg Roedel:
"Core changes:
- Constification of bus_type pointer
- Preparations for user-space page-fault delivery
- Use a named kmem_cache for IOVA magazines
Intel VT-d changes from Lu Baolu:
- Add RBTree to track iommu probed devices
- Add Intel IOMMU debugfs document
- Cleanup and refactoring
ARM-SMMU Updates from Will Deacon:
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2: Support for Qualcomm X1E80100 MDSS
- SMMUv3: Significant rework of the driver's STE manipulation and
domain handling code. This is the initial part of a larger scale
rework aiming to improve the driver's implementation of the
IOMMU-API in preparation for hooking up IOMMUFD support.
AMD-Vi Updates:
- Refactor GCR3 table support for SVA
- Cleanups
Some smaller cleanups and fixes"
* tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu: Fix compilation without CONFIG_IOMMU_INTEL
iommu/amd: Fix sleeping in atomic context
iommu/dma: Document min_align_mask assumption
iommu/vt-d: Remove scalabe mode in domain_context_clear_one()
iommu/vt-d: Remove scalable mode context entry setup from attach_dev
iommu/vt-d: Setup scalable mode context entry in probe path
iommu/vt-d: Fix NULL domain on device release
iommu: Add static iommu_ops->release_domain
iommu/vt-d: Improve ITE fault handling if target device isn't present
iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected
PCI: Make pci_dev_is_disconnected() helper public for other drivers
iommu/vt-d: Use device rbtree in iopf reporting path
iommu/vt-d: Use rbtree to track iommu probed devices
iommu/vt-d: Merge intel_svm_bind_mm() into its caller
iommu/vt-d: Remove initialization for dynamically heap-allocated rcu_head
iommu/vt-d: Remove treatment for revoking PASIDs with pending page faults
iommu/vt-d: Add the document for Intel IOMMU debugfs
iommu/vt-d: Use kcalloc() instead of kzalloc()
iommu/vt-d: Remove INTEL_IOMMU_BROKEN_GFX_WA
iommu: re-use local fwnode variable in iommu_ops_from_fwnode()
...
