Although, in theory, the clock provider functionality could be enabled
as a standalone driver feature, in practice it is unlikely that it would
be ever needed separately from the common PHY related features, i.e.
making use of the PHY PLL as an alternative and more accurate clock
source for display modes handling. Which means the PLL will be always
programmed according to the TMDS char rate set via the HDMI PHY
configuration API.
Currently it's possible to freely adjust the rate via the clock API as
well, that is through clk_set_rate(). Making the clock read-only is not
feasible since we need to ensure any rate update done via the PHY
configuration API has been actually programmed into the hardware before
CCF accesses it. This would be normally done during phy_ops.power_on()
or clk_ops.prepare() callbacks, but it might happen that the former gets
fired too late and the latter only once, hence we need to keep handle it
via clk_ops.set_rate() as a fallback approach.
Prevent changing the TMDS character rate via CCF by letting
rk_hdptx_phy_clk_round_rate() always return the value set via
phy_configure(). To avoid breaking existing users, i.e. RK DW HDMI QP
bridge driver, until the switch to the HDMI PHY config based approach is
completed, introduce a temporary exception to the rule, toggled via the
new ->restrict_rate_change flag, which indicates whether phy_configure()
has been called or not.
Additionally, revert any unlikely rate change that might have occurred
between the calls to ->round_rate() and ->set_rate().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250318-phy-sam-hdptx-bpc-v6-11-8cb1678e7663@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current workaround to setup the TMDS character rate relies on the
unconventional usage of phy_set_bus_width().
Make use of the recently introduced HDMI PHY configuration API to
properly handle the setup. The workaround will be dropped as soon as
the switch has been completed on both ends.
Rename rk_hdptx_phy_verify_config() to rk_hdptx_phy_verify_dp_config()
and introduce the rk_hdptx_phy_verify_hdmi_config() helper to check the
HDMI parameters during phy_configure().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250318-phy-sam-hdptx-bpc-v6-9-8cb1678e7663@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ropll_tmds_cfg table used to identify the configuration params for
the supported rates expects the search key, i.e. bit_rate member of
struct ropll_config, to be provided in hHz rather than Hz (1 hHz = 100
Hz). This requires multiple conversions between these units being
performed at runtime.
Improve implementation clarity and efficiency by consistently using the
Hz unit throughout driver's internal data structures and functions.
Also rename the rather misleading struct member.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-phy-sam-hdptx-bpc-v6-8-8cb1678e7663@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some QCOM PCIe PHYs support no_csr reset. Unlike BCR reset which resets the
whole PHY (hardware and register), no_csr reset only resets PHY hardware
but retains register values, which means PHY setting can be skipped during
PHY init if PCIe link is enabled in bootloader and only no_csr is toggled
after that.
Hence, determine whether the PHY has been enabled in bootloader by
verifying QPHY_START_CTRL register. If it's programmed and no_csr reset is
available, skip BCR reset and PHY register setting to establish the PCIe
link with bootloader - programmed PHY settings.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Signed-off-by: Wenbin Yao <quic_wenbyao@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/r/20250411113120.651363-3-quic_wenbyao@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On the Renesas Gray Hawk Single development board:
can-transceiver-phy can-phy0: /can-phy0: failed to get mux-state (0)
"mux-states" is an optional property for CAN transceivers. However,
mux_get() always prints an error message in case of an error, including
when the property is not present, confusing the user.
Fix this by re-instating the property presence check (this time using
the proper API) in a wrapper around devm_mux_state_get(). When the
multiplexer subsystem gains support for optional muxes, the wrapper can
just be removed.
In addition, propagate all real errors upstream, instead of ignoring
them.
Fixes: d02dfd4ceb ("phy: can-transceiver: Drop unnecessary "mux-states" property presence check")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/3d7e0d723908284e8cf06ad1f7950c03173178f3.1742483710.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current implementation uses bias_pad_enable as a reference count to
manage the shared bias pad for all UTMI PHYs. However, during system
suspension with connected USB devices, multiple power-down requests for
the UTMI pad result in a mismatch in the reference count, which in turn
produces warnings such as:
[ 237.762967] WARNING: CPU: 10 PID: 1618 at tegra186_utmi_pad_power_down+0x160/0x170
[ 237.763103] Call trace:
[ 237.763104] tegra186_utmi_pad_power_down+0x160/0x170
[ 237.763107] tegra186_utmi_phy_power_off+0x10/0x30
[ 237.763110] phy_power_off+0x48/0x100
[ 237.763113] tegra_xusb_enter_elpg+0x204/0x500
[ 237.763119] tegra_xusb_suspend+0x48/0x140
[ 237.763122] platform_pm_suspend+0x2c/0xb0
[ 237.763125] dpm_run_callback.isra.0+0x20/0xa0
[ 237.763127] __device_suspend+0x118/0x330
[ 237.763129] dpm_suspend+0x10c/0x1f0
[ 237.763130] dpm_suspend_start+0x88/0xb0
[ 237.763132] suspend_devices_and_enter+0x120/0x500
[ 237.763135] pm_suspend+0x1ec/0x270
The root cause was traced back to the dynamic power-down changes
introduced in commit a30951d31b ("xhci: tegra: USB2 pad power controls"),
where the UTMI pad was being powered down without verifying its current
state. This unbalanced behavior led to discrepancies in the reference
count.
To rectify this issue, this patch replaces the single reference counter
with a bitmask, renamed to utmi_pad_enabled. Each bit in the mask
corresponds to one of the four USB2 PHYs, allowing us to track each pad's
enablement status individually.
With this change:
- The bias pad is powered on only when the mask is clear.
- Each UTMI pad is powered on or down based on its corresponding bit
in the mask, preventing redundant operations.
- The overall power state of the shared bias pad is maintained
correctly during suspend/resume cycles.
The mutex used to prevent race conditions during UTMI pad enable/disable
operations has been moved from the tegra186_utmi_bias_pad_power_on/off
functions to the parent functions tegra186_utmi_pad_power_on/down. This
change ensures that there are no race conditions when updating the bitmask.
Cc: stable@vger.kernel.org
Fixes: a30951d31b ("xhci: tegra: USB2 pad power controls")
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250408030905.990474-1-waynec@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Implement support for Exynos7870 USB DRD on top of the existing
exynos5-usbdrd driver.
Exynos7870 has a single USB 2.0 DRD PHY controller and no 3.0 PHYs. Thus,
it only supports the UTMI interface.
Moreover, the PMU register offset for enabling the PHY controller is
different for SoCs such as Exynos7870, where BIT(0) is for the 3.0 PHY and
BIT(1) is for the 2.0 PHY. The phy_isol function for Exynos7870 uses the
appropriate register offsets.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250410-exynos7870-usbphy-v2-3-2eb005987455@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Most Exynos850 and Exynos9 (GS101) DRD PHY registers use GENMASK for masks
and FIELD_PREP for writing values to registers.
Rewrite the register definitions which don't follow this approach to follow
it as much as possible. This patch doesn't introduce any fixes or
functional changes, it's merely an attempt to introduce some uniformity and
consistency in the driver code.
The CRPORT SuperSpeed control registers have been exempted from this
change. Since the writing of register values do not require any masking
operations, implementing it would unnecessarily complicate things.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250410-exynos7870-usbphy-v2-1-2eb005987455@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull phy updates from Vinod Koul:
"A fairly moderate sized request for the generic phy subsystem with
some new device and driver support along with driver updates with
Samsung and Qualcomm ones being major ones.
New HW Support:
- Qualcomm X1P42100 PCIe Gen4x4, QCS615 qmp usbc, PCIe UNIPHY 28LP
driver, SM8750 QMP UFS PHY
- Rockchip rk3576 hdptx, rk3562 naneng-combo support
- Samsung MIPI D-/C-PHY driver, ExynosAutov920 ufs phy driver
Updates:
- Samsung USB3 Type-C lane orientation detection and configuration
for Google gs101
- Qualcomm support for dual lane PHY support for QCS8300 SoC"
* tag 'phy-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (47 commits)
phy: rockchip-naneng-combo: Support rk3562
dt-bindings: phy: rockchip: Add rk3562 naneng-combophy compatible
phy: rockchip: Add Samsung MIPI D-/C-PHY driver
dt-bindings: phy: Add Rockchip MIPI C-/D-PHY schema
phy: qcom: uniphy-28lp: add COMMON_CLK dependency
phy: rockchip: usbdp: Remove unnecessary bool conversion
phy: rockchip: usbdp: Avoid call hpd_event_trigger in dp_phy_init
phy: rockchip: usbdp: Only verify link rates/lanes/voltage when the corresponding set flags are set
phy: qcom-qmp-pcie: add dual lane PHY support for QCS8300
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS8300 QMP PCIe PHY Gen4 x2
phy: qcom-qmp-ufs: Add PHY Configuration support for sm8750
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the SM8750 QMP UFS PHY
phy: qcom: Introduce PCIe UNIPHY 28LP driver
dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy
phy: qcom: qmp-usbc: Add qmp configuration for QCS615
phy: freescale: imx8m-pcie: assert phy reset and perst in power off
phy: freescale: imx8m-pcie: cleanup reset logic
phy: core: Remove unused phy_pm_runtime_(allow|forbid)
dt-bindings: phy: document Allwinner A523 USB-2.0 PHY
phy: phy-rockchip-samsung-hdptx: Add support for RK3576
...
Function rk_udphy_dp_hpd_event_trigger will set vogrf let it
trigger HPD interrupt to DP by Type-C. This configuration is only
required when the DP work in Alternate Mode, and called by
typec_mux_set. In standard DP mode, such settings will prevent
the DP from receiving HPD interrupts.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20250302115257.188774-1-andyshrk@163.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According documentation of phy_configure_opts_dp, at the configure
stage, link rates should only be verify/configure when set_rate
flag is set, the same applies to lanes and voltage.
So do it as the documentation says.
Because voltage setting depends on the lanes, link rates set
previously, so record the link rates and lanes at it's verify stage.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20250312080041.524546-1-andyshrk@163.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Ensure the PHY reset and perst is asserted during power-off to
guarantee it is in a reset state upon repeated power-on calls. This
resolves an issue where the PHY may not properly initialize during
subsequent power-on cycles. Power-on will deassert the reset at the
appropriate time after tuning the PHY parameters.
During suspend/resume cycles, we observed that the PHY PLL failed to
lock during resume when the CPU temperature increased from 65C to 75C.
The observed errors were:
phy phy-32f00000.pcie-phy.3: phy poweron failed --> -110
imx6q-pcie 33800000.pcie: waiting for PHY ready timeout!
imx6q-pcie 33800000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x80 returns -110
imx6q-pcie 33800000.pcie: PM: failed to resume noirq: error -110
This resulted in a complete CPU freeze, which is resolved by ensuring
the PHY is in reset during power-on, thus preventing PHY PLL failures.
Cc: stable@vger.kernel.org
Fixes: 1aa97b0022 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250305144355.20364-3-eichest@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Remove the switch statement and base perst release on whether it is
found in the device tree. The probe function fails without the reset
property, making it mandatory. Therefore, always release reset
independent of the variant.
This does not change the behavior of the driver but reduces driver
complexity and allows for easier future modifications.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250305144355.20364-2-eichest@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
