This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
Merge the support for loading and managing the TrustZone-based remote
processors found in the Glymur platform through a topic branch, as it's
a mix of qcom-soc and remoteproc patches.
qcom_mdt_pas_init() was previously used only by the remoteproc driver
(drivers/remoteproc/qcom_q6v5_pas.c). Since that driver has now
transitioned to using PAS context-based qcom_mdt_pas_load() function,
making qcom_mdt_pas_init() obsolete for external use.
Removes qcom_mdt_pas_init() from the list of exported symbols and make
it static to limit its scope to internal use within mdtloader.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-7-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce a new PAS context-aware function, qcom_mdt_pas_load(), for
remote processor drivers. This function utilizes the PAS context
pointer returned from qcom_scm_pas_ctx_init() to perform firmware
metadata verification and memory setup via SMC calls.
The qcom_mdt_pas_load() and qcom_mdt_load() functions are largely
similar, but the former is designed for clients using the PAS
context-based data structure. Over time, all users of qcom_mdt_load()
can be migrated to use qcom_mdt_pas_load() for consistency and
improved abstraction.
As the remoteproc PAS driver (qcom_q6v5_pas) has already adopted the
PAS context-based approach, update it to use qcom_mdt_pas_load().
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-6-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As a superset of the existing metadata context, the PAS context
structure enables both remoteproc and non-remoteproc subsystems to
better support scenarios where the SoC runs with or without the Gunyah
hypervisor. To reflect this, relevant SCM and metadata functions are
updated to incorporate PAS context awareness and remove metadata context
data structure completely.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-5-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some compute SoCs support additional operation modes, extending the
existing set of USB3/safe/DP-alt-mode.
The firmware performs all the necessary handshakes for
us and there is no room for error on that level (i.e. the sequences
will match what happens on Windows).
The trade-off with that approach is that the received notifications
trim some of the PDO/EUDO data (particularly the cable/plug parts),
offering a set of similar-in-nature-but-not-the-same indicators.
In an attempt to remedy this, I reconstructed some of it, so that the
connected mux/retimer drivers can continue to behave as expected.
Add support for parsing the aforementioned data coming from PMIC_GLINK
and passing it on to the various Type-C components.
Reviewed-by: Jack Pham <jack.pham@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251027-topic-pg_altmode_usb4-v1-1-2931a3ecc146@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
In the 'mdt_loader.h' header, both the prototype and the inline
version of the qcom_mdt_load() function uses 'fw_name' as name for
the firmware name parameter. Additionally, the other qcom_mdt_*
functions are using that as well.
For consistency, rename the 'firmware' parameter in the implementation
of the qcom_mdt_load() to 'fw_name' and update the function accordingly.
No functional changes.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251111-mdt-loader-cleanup-v1-2-71afee094dce@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The qcom_mdt_load_no_init() function is just a simple wrapper around
of __qcom_mdt_load(). Since commit 0daf35da39 ("soc: qcom: mdt_loader:
Remove pas id parameter") both functions are using the same type of
parameters and providing the same functionality.
Keeping two functions for the same purpose is superfluous, so rename
the __qcom_mdt_load() function to qcom_mdt_load_no_init() and remove
the wrapper.
No functional changes.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251111-mdt-loader-cleanup-v1-1-71afee094dce@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some of the new field added to socinfo structure with version 21, 22
and 23 which is only used by boot firmware and it is of no use for
Linux.Add reserve field in socinfo so that the structure remain
updated and prepared if we get any new field in future which could
be used by Linux. While at it, also updates switch case for backward
compatibility if the SoC runs with boot firmware which has these
new version added.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251104130906.167666-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
HWKM v1 and v2 differ slightly in wrapped key size and the bit fields for
certain status registers and operating mode (legacy or standard).
Add support to select HWKM version based on the major and minor revisions.
Use this HWKM version to select wrapped key size and to configure the bit
fields in registers for operating modes and hardware status.
Support for SCM calls for wrapped keys is being added in the TrustZone for
few SoCs with HWKM v1. Existing check of qcom_scm_has_wrapped_key_support()
API ensures that HWKM is used only if these SCM calls are supported in
TrustZone for that SoC.
Signed-off-by: Neeraj Soni <neeraj.soni@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251030161012.3391239-1-neeraj.soni@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is currently a problem where, in the specific case of SMEM not
initialized by SBL, any SMEM API wrongly returns PROBE_DEFER
communicating wrong info to any user of this API.
A better way to handle this would be to track the SMEM state and return
a different kind of error than PROBE_DEFER.
Rework the __smem handle to always init it to the error pointer
-EPROBE_DEFER following what is already done by the SMEM API.
If we detect that the SBL didn't initialized SMEM, set the __smem handle
to the error pointer -ENODEV.
Also rework the SMEM API to handle the __smem handle to be an error
pointer and return it appropriately.
This way user of the API can react and return a proper error or use
fallback way for the failing API.
While at it, change the return error when SMEM is not initialized by SBL
also to -ENODEV to make it consistent with the __smem handle and use
dev_err_probe() helper to return the message.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20251031130835.7953-3-ansuelsmth@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The hwspinlock acquired via hwspin_lock_request_specific() is not
released on several error paths. This results in resource leakage
when probe fails.
Switch to devm_hwspin_lock_request_specific() to automatically
handle cleanup on probe failure. Remove the manual hwspin_lock_free()
in qcom_smem_remove() as devm handles it automatically.
Fixes: 20bb6c9de1 ("soc: qcom: smem: map only partitions used by local HOST")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251029022733.255-1-vulab@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In the commit referenced by the Fixes tag, devm_clk_get_enabled() was
introduced to replace devm_clk_get() and clk_prepare_enable(). While
the clk_disable_unprepare() call in the error path was correctly
removed, the one in the remove function was overlooked, leading to a
double disable issue.
Remove the redundant clk_disable_unprepare() call from gsbi_remove()
to fix this issue. Since all resources are now managed by devres
and will be automatically released, the remove function serves no purpose
and can be deleted entirely.
Fixes: 489d7a8cc2 ("soc: qcom: use devm_clk_get_enabled() in gsbi_probe()")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/stable/20251020160215.523-1-vulab%40iscas.ac.cn
Link: https://lore.kernel.org/r/20251020160215.523-1-vulab@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
System On Chip Control Processor (SOCCP) is a subsystem that can have
battery management firmware running on it to support Type-C/PD and
battery charging. SOCCP does not have multiple PDs and hence PDR is not
supported. So, if the subsystem comes up/down, rpmsg driver would be
probed or removed. Use that for notifying clients of pmic_glink for
PDR events.
Add support for battery management FW running on SOCCP by adding the
"PMIC_RTR_SOCCP_APPS" channel name to the rpmsg_match list and
updating notify_clients logic.
Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250919175025.2988948-1-anjelique.melendez@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
More Qualcomm device driver updates for v6.18
Introduce support for loading firmware into the QUP serial engines from
Linux, which allows deferring selection of which protocol (uart, i2c,
spi, etc) a given SE should have until the OS loads.
Also introduce the "object invoke" interface in the SCM driver, to
provide interface to the Qualcomm TEE driver.
* tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
firmware: qcom: scm: add support for object invocation
firmware: qcom: tzmem: export shm_bridge create/delete
Link: https://lore.kernel.org/r/20250921020225.595403-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull SoC fixes from Arnd Bergmann:
"These are mainly devicetree fixes for the rockchip and nxp platforms
on arm64, addressing mistakes in the board and soc specific
descriptions.
In particular the newly added Rock 5T board required multiple bugfixes
for PCIe and USB, while on the i.MX platform there are a number of
regulator related fixes. The only other platforms with devicetree
fixes are at91 with a fixup for SD/MMC and a change to enable all the
available UARTS on the Axiado reference board.
Also on the at91 platform, a Kconfig change addresses a regression
that stopped the DMA engine from working in 6.17-rc.
Three drivers each have a simple bugfix, stopping incorrect behavior
in op-tee firmware, the tee subsystem and the qualcomm mdt_loader.
Two trivial MAINTAINERS file changes are needed to make sure that
patches reach the correct maintainer, but don't change the actual
responsibilities"
* tag 'soc-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
ARM: dts: microchip: sama7d65: Force SDMMC Legacy mode
ARM: at91: select ARCH_MICROCHIP
arm64: dts: rockchip: fix second M.2 slot on ROCK 5T
arm64: dts: rockchip: fix USB on RADXA ROCK 5T
MAINTAINERS: exclude defconfig from ARM64 PORT
arm64: dts: axiado: Add missing UART aliases
MAINTAINERS: Update Nobuhiro Iwamatsu's email address
arm64: dts: rockchip: Add vcc-supply to SPI flash on Pinephone Pro
arm64: dts: rockchip: fix es8388 address on rk3588s-roc-pc
arm64: dts: rockchip: Fix Bluetooth interrupts flag on Neardi LBA3368
arm64: dts: rockchip: correct network description on Sige5
arm64: dts: rockchip: Minor whitespace cleanup
ARM: dts: rockchip: Minor whitespace cleanup
arm64: dts: rockchip: Add supplies for eMMC on rk3588-orangepi-5
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5 plus
arm64: dts: imx95: Fix JPEG encoder node assigned clock
arm64: dts: imx95-19x19-evk: correct the phy setting for flexcan1/2
arm64: dts: imx8mp: Fix missing microSD slot vqmmc on Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mp: Fix missing microSD slot vqmmc on DH electronics i.MX8M Plus DHCOM
arm64: dts: imx8mp-tqma8mpql: remove virtual 3.3V regulator
...
Unconditionally clear the TCS_AMC_MODE_TRIGGER bit when a
transaction completes. Previously this bit was only cleared when
a wake TCS was borrowed as an AMC TCS but not for dedicated
AMC TCS. Leaving this bit set for AMC TCS and entering deeper low
power modes can generate a false completion IRQ.
Prevent this scenario by always clearing the TCS_AMC_MODE_TRIGGER
bit upon receiving a completion IRQ.
Fixes: 15b3bf61b8 ("soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS")
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250825-rpmh_rsc_change-v1-1-138202c31bf6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
