Johannes Berg says:
====================
Another fairly large set of changes, notably:
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
* tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (184 commits)
wifi: iwlegacy: add missing mutex protection in il4965_store_tx_power()
wifi: iwlegacy: add missing mutex protection in il3945_store_measurement()
wifi: mac80211: use u64_stats_t with u64_stats_sync properly
wifi: p54: Fix memory leak in p54_beacon_update()
wifi: cfg80211: treat deprecated INDOOR_SP_AP_OLD control value as LPI mode
wifi: rtw88: sdio: Migrate to use sdio specific shutdown function
wifi: rsi: sdio: Migrate to use sdio specific shutdown function
sdio: Provide a bustype shutdown function
wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request
wifi: nl80211/cfg80211: add negotiated burst period to FTM result
wifi: nl80211/cfg80211: clarify periodic FTM parameters for non-EDCA based ranging
wifi: nl80211/cfg80211: add new FTM capabilities
wifi: iwlwifi: rename struct iwl_mcc_allowed_ap_type_cmd::offset_map
wifi: iwlwifi: mvm: Remove link_id from time_events
wifi: iwlwifi: mld: change cluster_id type to u8 array
wifi: iwlwifi: support V13 of iwl_lari_config_change_cmd
wifi: iwlwifi: split bios_value_u32 to separate the header
wifi: iwlwifi: uefi: cache the DSM functions
wifi: iwlwifi: acpi: cache the DSM functions
wifi: iwlwifi: mvm: Cleanup MLO code
...
====================
Link: https://patch.msgid.link/20260129110136.176980-39-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the AP has an advertised TID to Link Mapping (TTLM) it shall
include the element in the association response. As such, when this
element is present it needs to be used for the currently dormant links.
See Draft P802.11REVmf_D1.0 section 35.3.7.2.3 ("Negotiation of TTLM")
for the details. The flag is also not usable in case userspace wants to
specify a negotiated TTLM during association.
Note that for the link reconfiguration case, mac80211 did not use the
information. Draft P802.11REVmf_D1.0 states in section 35.3.6.4 ("Link
reconfiguration to the setup links) that we "shall operate with all the
TIDs mapped to the newly added links ..."
All this means that the flag is not needed. The implementation should
parse the information from the association response.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260118093904.754e057896a5.Ifd06f5ef839a93bfd54d0593dc932870f95f3242@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, whenever cfg80211_stop_iface() is called, the entire iface
is stopped. However, there could be a need in AP/P2P_GO mode, where
one would like to stop a single link in MLO operation instead of the
whole MLD interface.
Hence, introduce cfg80211_stop_link() to allow drivers to tear down
only a specified AP/P2P_GO link during MLO operation. Passing -1
preserves the existing behavior of stopping the whole interface. Make
cfg80211_stop_iface() call this function by passing -1 to keep the
default behavior the same, that is, to stop all links and use
cfg80211_stop_link() with the desired link_id for AP/P2P_GO mode, to
stop only that link.
This brings no behavioral change for single-link/non-MLO interfaces,
and enables drivers to stop an AP/P2P_GO link without disrupting other
links on the same interface.
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Link: https://patch.msgid.link/20251127-stop_link-v2-1-43745846c5fd@qti.qualcomm.com
[make cfg80211_stop_iface() inline]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec5 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c4 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c00 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9 ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The normal timer mechanism assume that timeout further in the future
need a lower accuracy. As an example, the granularity for a timer
scheduled 4096 ms in the future on a 1000 Hz system is already 512 ms.
This granularity is perfectly sufficient for e.g. timeouts, but there
are other types of events that will happen at a future point in time and
require a higher accuracy.
Add a new wiphy_hrtimer_work type that uses an hrtimer internally. The
API is almost identical to the existing wiphy_delayed_work and it can be
used as a drop-in replacement after minor adjustments. The work will be
scheduled relative to the current time with a slack of 1 millisecond.
CC: stable@vger.kernel.org # 6.4+
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251028125710.7f13a2adc5eb.I01b5af0363869864b0580d9c2a1770bafab69566@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In multi-radio wiphy architecture, where a single wiphy can have
multiple radios tied to it, radio specific configuration parameters
and global wiphy parameters are maintained for the entire physical
device and common to all radios. But, each radio in a wiphy can have
different values for each radio configuration parameter, like RTS
threshold. With the current debugfs directory structure, the values
of global wiphy configuration parameters can be viewed, but, values
of individual radio configuration parameters cannot be viewed, as
radio specific configuration parameters are not maintained, separately.
To address this, in addition to maintaining global wiphy configuration
parameters common to all radios, create separate debugfs directories
for each radio in a wiphy to maintain parameters corresponding to that
radio in this directory.
In implementation, maintain a dentry structure in wiphy_radio_cfg, a
structure containing radio configurations of a wiphy. This struct is
maintained to denote per-radio configurations of a wiphy. Create
separate directories representing each radio within phy#X directory in
debugfs during wiphy registration.
Sample directory structure with this change:
ls /sys/kernel/debug/ieee80211/phy0/radio
radio0/ radio1/ radio2/
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20251024044649.483557-2-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In multi-radio devices, it is possible to have an MLD AP and a monitor
interface active at the same time. In such cases, monitor mode may not
be able to specify a fixed channel and could end up capturing frames
from all radios, including those outside the intended frequency bands.
This patch adds frequency validation for monitor mode. Received frames
are now only processed if their frequency fall within the allowed ranges
of the radios specified by the interface's radio_mask.
This prevents monitor mode from capturing frames outside the supported radio.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/700b8284e845d96654eb98431f8eeb5a81503862.1758647858.git.ryder.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These were used by S1G for older chandef representation, but
are no longer needed. Clean them up, even if we can't drop
them from the userspace API entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the S1G channelisation implementation differs from that of
VHT, which is the PHY that S1G is based on. The major difference between
the clock rate is 1/10th of VHT. However how their channelisation is
represented within cfg80211 and mac80211 vastly differ.
To rectify this, remove the use of IEEE80211_CHAN_1/2/4.. flags that were
previously used to indicate the control channel width, however it should be
implied that the control channels are 1MHz in the case of S1G. Additionally,
introduce the invert - being IEEE80211_CHAN_NO_4/8/16MHz - that imply
the control channel may not be used for a certain bandwidth. With these
new flags, we can perform regulatory and chandef validation just as we would
for VHT.
To deal with the notion that S1G PHYs may contain a 2MHz primary channel,
introduce a new variable, s1g_primary_2mhz, which indicates whether we are
operating on a 2MHz primary channel. In this case, the chandef::chan points to
the 1MHz primary channel pointed to by the primary channel location. Alongside
this, introduce some new helper routines that can extract the sibling 1MHz
channel. The sibling being the alternate 1MHz primary subchannel within the
2MHz primary channel that is not pointed to by chandef::chan.
Furthermore, due to unique restrictions imposed on S1G PHYs, introduce
a new flag, IEEE80211_CHAN_S1G_NO_PRIMARY, which states that the 1MHz channel
cannot be used as a primary channel. This is assumed to be set by vendors
as it is hardware and regdom specific, When we validate a 2MHz primary channel,
we need to ensure both 1MHz subchannels do not contain this flag. If one or
both of the 1MHz subchannels contain this flag then the 2MHz primary is not
permitted for use as a primary channel.
Properly integrate S1G channel validation such that it is implemented
according with other PHY types such as VHT. Additionally, implement a new
S1G-specific regulatory flag to allow cfg80211 to understand specific
vendor requirements for S1G PHYs.
Signed-off-by: Arien Judge <arien.judge@morsemicro.com>
Signed-off-by: Andrew Pope <andrew.pope@morsemicro.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250918051913.500781-2-lachlan.hodges@morsemicro.com
[remove redundant NL80211_ATTR_S1G_PRIMARY_2MHZ check]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This notification will be used by the device to inform user space
about upcoming DW. When received, user space will be able to prepare
multicast Service Discovery Frames (SDFs) to be transmitted during the
next DW using %NL80211_CMD_FRAME command on the NAN management interface.
The device/driver will take care to transmit the frames in the correct
timing. This allows to implement a synchronized Discovery Engine (DE)
in user space, if the device doesn't support DE offload.
Note that this notification can be sent before the actual DW starts as
long as the driver/device handles the actual timing of the SDF
transmission.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.0e1d15031bab.I5b1721e61b63910452b3c5cdcdc1e94cb094d4c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The so-called fullmac devices rely on firmware functionality and/or API to
change BSS parameters. Today there are limited drivers supporting the
nl80211 primitive, but they only handle a subset of the bss parameters
passed if any. The mac80211 driver does handle all parameters and stores
their configured values. Some of the BSS parameters were already conditional
by wiphy->features. For these the wiphy->bss_param_support and wiphy->features
fields are silently aligned in wiphy_register(). Maybe better to issue a warning
instead when they are misaligned.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250817190435.1495094-2-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a valid radio index is not found, the function returns -ENOENT. If the
channel argument itself is invalid, it returns -EINVAL. However, since the
caller only checks for < 0, the distinction between these error codes is
not utilized much. Also, handling these two distinct error codes throughout
the codebase adds complexity, as both cases must be addressed separately. A
subsequent change aims to simplify this by using a single error code for
all invalid cases, making error handling more consistent and streamlined.
To support this change, update the return value to -EINVAL when a valid
radio index is not found. This is still appropriate because, even if the
channel argument is structurally valid, the absence of a corresponding
radio index implies that the argument is effectively invalid—otherwise, a
valid index would have been found.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812-fix_scan_ap_flag_requirement_during_mlo-v4-1-383ffb6da213@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
S1G short beacons are an optional frame type used in an S1G BSS
that contain a limited set of elements. While they are optional,
they are a fundamental part of S1G that enables significant
power saving.
Expose 2 additional netlink attributes,
NL80211_ATTR_S1G_LONG_BEACON_PERIOD which denotes the number of beacon
intervals between each long beacon and NL80211_ATTR_S1G_SHORT_BEACON
which is a nested attribute containing the short beacon tail and
head. We split them as the long beacon period cannot be updated,
and is only used when initialisng the interface, whereas the short
beacon data can be used to both initialise and update the templates.
This follows how things such as the beacon interval and DTIM period
currently operate.
During the initialisation path, we ensure we have the long beacon
period if the short beacon data is being passed down, whereas
the update path will simply update the template if its sent down.
The short beacon data is validated using the same routines for regular
beacons as they support correctly parsing the short beacon format
while ensuring the frame is well-formed.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250717074205.312577-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At present, the updated unsolicited broadcast probe response template is
not processed during userspace commands such as channel switch or color
change. This leads to an issue where older incorrect unsolicited probe
response is still used during these events.
Add support to parse the netlink attribute and store it so that
mac80211/drivers can use it to set the BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
flag in order to send the updated unsolicited broadcast probe response
templates during these events.
Signed-off-by: Yuvarani V <quic_yuvarani@quicinc.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250710-update_unsol_bcast_probe_resp-v2-1-31aca39d3b30@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit e3eac9f32e ("wifi: cfg80211: Annotate struct
cfg80211_scan_request with __counted_by").
This really has been a completely failed experiment. There were
no actual bugs found, and yet at this point we already have four
"fixes" to it, with nothing to show for but code churn, and it
never even made the code any safer.
In all of the cases that ended up getting "fixed", the structure
is also internally inconsistent after the n_channels setting as
the channel list isn't actually filled yet. You cannot scan with
such a structure, that's just wrong. In mac80211, the struct is
also reused multiple times, so initializing it once is no good.
Some previous "fixes" (e.g. one in brcm80211) are also just setting
n_channels before accessing the array, under the assumption that the
code is correct and the array can be accessed, further showing that
the whole thing is just pointless when the allocation count and use
count are not separate.
If we really wanted to fix it, we'd need to separately track the
number of channels allocated and the number of channels currently
used, but given that no bugs were found despite the numerous syzbot
reports, that'd just be a waste of time.
Remove the __counted_by() annotation. We really should also remove
a number of the n_channels settings that are setting up a structure
that's inconsistent, but that can wait.
Reported-by: syzbot+e834e757bd9b3d3e1251@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e834e757bd9b3d3e1251
Fixes: e3eac9f32e ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Link: https://patch.msgid.link/20250714142130.9b0bbb7e1f07.I09112ccde72d445e11348fc2bef68942cb2ffc94@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, setting RTS threshold is based on per-phy basis, i.e., all the
radios present in a wiphy will take RTS threshold value to be the one sent
from userspace. But each radio in a multi-radio wiphy can have different
RTS threshold requirements.
To extend support to set RTS threshold for each radio, get the radio for
which RTS threshold needs to be changed from the user. Use the attribute
in NL - NL80211_ATTR_WIPHY_RADIO_INDEX, to identify the radio of interest.
Create a new structure - wiphy_radio_cfg and add rts_threshold in it as a
u32 value to store RTS threshold of each radio in a wiphy and allocate
memory for it during wiphy register based on the wiphy.n_radio updated by
drivers. Pass radio id received from the user to mac80211 drivers along
with its corresponding RTS threshold.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-3-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, per-radio attributes are set on per-phy basis, i.e., all the
radios present in a wiphy will take attributes values sent from user. But
each radio in a wiphy can get different values from userspace based on
its requirement.
To extend support to set per-radio attributes, add support to get radio
index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX,
to get user specified radio index for which attributes should be changed.
Pass this to individual drivers, so that the drivers can use this radio
index to change per-radio attributes when necessary. Currently, per-radio
attributes identified are:
NL80211_ATTR_WIPHY_TX_POWER_LEVEL
NL80211_ATTR_WIPHY_ANTENNA_TX
NL80211_ATTR_WIPHY_ANTENNA_RX
NL80211_ATTR_WIPHY_RETRY_SHORT
NL80211_ATTR_WIPHY_RETRY_LONG
NL80211_ATTR_WIPHY_FRAG_THRESHOLD
NL80211_ATTR_WIPHY_RTS_THRESHOLD
NL80211_ATTR_WIPHY_COVERAGE_CLASS
NL80211_ATTR_TXQ_LIMIT
NL80211_ATTR_TXQ_MEMORY_LIMIT
NL80211_ATTR_TXQ_QUANTUM
By default, the radio index is set to -1. This means the attribute should
be treated as a global configuration. If the user has not specified any
index, then the radio index passed to individual drivers would be -1. This
would indicate that the attribute applies to all radios in that wiphy.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, sinfo structure is supported to fill information at
deflink( or one of the links) level for station. This has problems
when applied to fetch multi-link(ML) station information.
Hence, if valid_links are present, support filling link_station
structure for each link.
This will be helpful to check the link related statistics during MLO.
Additionally, TXQ stats for pertid are applicable at station level
not at link level. Therefore check link_id is less then 0, before
filling TXQ stats in pertid stats.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-9-quic_sarishar@quicinc.com
[fix some indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, station_info structure is passed to fill station statistics
from mac80211/drivers. After NL message send to user space for requested
station statistics, memory for station statistics is freed in cfg80211.
Therefore, memory allocation/free for link station statistics should
also happen in cfg80211 only.
Hence, allocate the memory for link_station structure for all
possible links and free in cfg80211_sinfo_release_content().
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-6-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Current implementation of NL80211_GET_STATION does not work for
multi-link operation(MLO) since in case of MLO only deflink (or one
of the links) is considered and not all links.
Therefore to support for MLO, add link_station_info structure
to account link level statistics for station.
Additionally, add valid_links in station_info structure to indicate
bitmap of valid links for MLO. This will be helpful to check the link
related statistics during MLO.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-3-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the case of SME-in-driver, the driver can internally choose to
update the links based on the AP MLD recommendation and do link
reconfiguration negotiation with AP MLD.
(e.g., After the driver processing the BSS Transition Management request
frame received from the AP MLD with Neighbor Report containing
Multi-Link element with recommended links information chooses to do link
reconfiguration negotiation with AP MLD).
To support this, extend cfg80211_mlo_reconf_add_done() and
NL80211_CMD_ASSOC_MLO_RECONF to indicate added links information for
driver-initiated link reconfiguration requests. For removed links,
the driver indicates links information using the
NL80211_CMD_LINKS_REMOVED event for driver-initiated cases, the same as
supplicant initiated cases.
For the driver-initiated case, cfg80211 will receive link
reconfiguration result asynchronously from driver so holding BSSes of
the accepted add links is needed in the event path. Also, no need of
unhold call for the rejected add link BSSes since there was no hold call
happened previously.
Once the supplicant receives the NL80211_CMD_ASSOC_MLO_RECONF event,
it needs to process the information about newly added links and install
per-link group keys (e.g., GTK/IGTK/BIGTK etc.).
In case of the SME-in-driver, using a vendor interface etc. to notify
the supplicant to initiate a link reconfiguration request and then
supplicant sending command to the cfg80211 can lead to race conditions.
The correct design to avoid this is that the driver indicates the
cfg80211 directly with the results of the link reconfiguration
negotiation.
Signed-off-by: Kavita Kavita <quic_kkavita@quicinc.com>
Link: https://patch.msgid.link/20250604105757.2542-3-quic_kkavita@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add utility API cfg80211_get_radio_idx_by_chan() to retrieve the radio
index corresponding to a given channel in a multi-radio wiphy.
This utility function can be used when we want to check the radio-specific
data for a channel in a multi-radio wiphy. For example, it can help
determine the radio index required to handle a scan request. This index
can then be used to decide whether the scan can proceed without
interfering with ongoing DFS operations on another radio.
Signed-off-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-1-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Enhanced multi-link single-radio (EMLSR) operation allows a non-AP MLD
with multiple receive chains to listen on one or more EMLSR links when the
corresponding non-AP STA(s) affiliated with the non-AP MLD is (are) in
the awake state. [IEEE 802.11be-2024, (35.3.17 Enhanced multi-link
single-radio (EMLSR) operation)]
An MLD which intends to enable EMLSR operations will set the EML
Capabilities Present subfield to 1 and shall set the EMLSR Support
subfield in the Common Info field of the Basic Multi-Link element to 1 in
all Management frames that include the Basic Multi-Link element except
Authentication frames. EML capabilities contains information such as
EML Transition timeout, Padding delay and Transition delay. These fields
needs to updated to drivers to trigger EMLSR operation and to transmit and
receive initial control frame and data frames.
Add support to receive EML Capabilities subfield that non-AP MLD
advertises during (re)association request and send it to underlying
drivers during ADD/SET station.
Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20250327051320.3253783-2-quic_ramess@quicinc.com
[accept EMLSR capabilities only for unassoc AP STA]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
