Stop using the maple big node for rebalance operations by changing to more
align with spanning store. The rebalance operation needs its own data
calculation in rebalance_data().
In the event of too much data, the rebalance tries to push the data using
push_data_sib(). If there is insufficient data, the rebalance operation
will rebalance against a sibling (found with rebalance_sib()).
The rebalance starts at the leaf and works its way upward in the tree
using rebalance_ascend(). Most of the code is shared with spanning store
such as the copy node having a new root, but is fundamentally different in
that the data must come from a sibling.
A parent maple state is used to track the parent location to avoid
multiple mas_ascend() calls. The maple state tree location is copied from
the parent to the mas (child) in the ascend step. Ascending itself is
done in the main loop.
Link: https://lkml.kernel.org/r/20260130205935.2559335-23-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrew Ballance <andrewjballance@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stop using the maple subtree state and big node in favour of using three
destinations in the maple copy node. That is, expand the way leaves were
handled to all levels of the tree and use the maple copy node to track the
new nodes.
Extract out the sibling init into the data calculation since this is where
the insufficient data can be detected. The remainder of the sibling code
to shift the next iteration is moved to the spanning_ascend() function,
since it is not always needed.
Next introduce the dst_setup() function which will decide how many nodes
are needed to contain the data at this level. Using the destination
count, populate the copy node's dst array with the new nodes and set
d_count to the correct value. Note that this can be tricky in the case of
a leaf node with exactly enough room because of the rule against NULLs at
the end of leaves.
Once the destinations are ready, copy the data by altering the
cp_data_write() function to copy from the sources to the destinations
directly. This eliminates the use of the big node in this code path. On
node completion, node_finalise() will zero out the remaining area and set
the metadata, if necessary.
spanning_ascend() is used to decide if the operation is complete. It may
create a new root, converge into one destination, or continue upwards by
ascending the left and right write maple states.
One test case setup needed to be tweaked so that the targeted node was
surrounded by full nodes.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20260130205935.2559335-18-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrew Ballance <andrewjballance@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce an internal-memory only node type called maple_copy to
facilitate internal copy operations. Use it in mas_spanning_rebalance()
for just the leaf nodes. Initially, the maple_copy node is used to
configure the source nodes and copy the data into the big_node.
The maple_copy contains a list of source entries with start and end
offsets. One of the maple_copy entries can be itself with an offset of 0
to 2, representing the data where the store partially overwrites entries,
or fully overwrites the entry. The side effect is that the source nodes
no longer have to worry about partially copying the existing offset if it
is not fully overwritten.
This is in preparation of removal of the maple big_node, but for the time
being the data is copied to the big node to limit the change size.
Link: https://lkml.kernel.org/r/20260130205935.2559335-12-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrew Ballance <andrewjballance@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "maple_tree: Replace big node with maple copy", v3.
The big node struct was created for simplicity of splitting, rebalancing,
and spanning store operations by using a copy buffer to create the data
necessary prior to breaking it up into 256B nodes. Certain operations
were rather tricky due to the restriction of keeping NULL entries together
and never at the end of a node (except the right-most node).
The big node struct is incompatible with future features that are
currently in development. Specifically different node types and different
data type sizes for pivots.
The big node struct was also a stack variable, which caused issues with
certain configurations of kernel build.
This series removes big node by introducing another node type which will
never be written to the tree: maple_copy. The maple copy node operates
more like a scatter/gather operation with a number of sources and
destinations of allocated nodes.
The sources are copied to the destinations, in turn, until the sources are
exhausted. The destination is changed if it is filled or the split
location is reached prior to the source data end.
New data is inserted by using the maple copy node itself as a source with
up to 3 slots and pivots. The data in the maple copy node is the data
being written to the tree along with any fragment of the range(s) being
overwritten.
As with all nodes, the maple copy node is of size 256B. Using a node type
allows for the copy operation to treat the new data stored in the maple
copy node the same as any other source node.
Analysis of the runtime shows no regression or benefit of removing the
larger stack structure. The motivation is the ground work to use new node
types and to help those with odd configurations that have had issues.
The change was tested by myself using mm_tests on amd64 and by Suren on
android (arm64). Limited testing on s390 qemu was also performed using
stress-ng on the virtual memory, which should cover many corner cases.
This patch (of 30):
Use RCU_INIT_POINTER to initialize an rcu pointer to an initial value
since there are no readers within the tree being created during
duplication. There is no risk of readers seeing the initialized or
uninitialized value until after the synchronization call in
mas_dup_buld().
Link: https://lkml.kernel.org/r/20260130205935.2559335-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20260130205935.2559335-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrew Ballance <andrewjballance@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
maple_tree tracepoints contain pointers to function names. Such a pointer
is saved when a tracepoint logs an event. There's no guarantee that it's
still valid when the event is parsed later and the pointer is dereferenced.
The kernel warns about these unsafe pointers.
event 'ma_read' has unsafe pointer field 'fn'
WARNING: kernel/trace/trace.c:3779 at ignore_event+0x1da/0x1e4
Mark the function names as tracepoint_string() to fix the events.
One case that doesn't work without my patch would be trace-cmd record
to save the binary ringbuffer and trace-cmd report to parse it in
userspace. The address of __func__ can't be dereferenced from
userspace but tracepoint_string will add an entry to
/sys/kernel/tracing/printk_formats
Link: https://lkml.kernel.org/r/20251030155537.87972-1-martin@kaiser.cx
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
Use the generic interface which should result in less bulk allocations
during a forking.
A part of this is to abstract the freeing of the sheaf or maple state
allocations into its own function so mas_destroy() and the tree
duplication code can use the same functionality to return any unused
resources.
[andriy.shevchenko@linux.intel.com: remove unused mt_alloc_bulk()]
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The fast path through a write will require replacing a single node in
the tree. Using a sheaf (32 nodes) is too heavy for the fast path, so
special case the node store operation by just allocating one node in the
maple state.
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Use prefilled sheaves instead of bulk allocations. This should speed up
the allocations and the return path of unused allocations.
Remove the push and pop of nodes from the maple state as this is now
handled by the slab layer with sheaves.
Testing has been removed as necessary since the features of the tree
have been reduced.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
kfree() is a little shorter and works with kmem_cache_alloc'd pointers
too. Also lets us remove one more helper.
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
kfree_rcu is an optimized version of call_rcu + kfree. It used to not be
possible to call it on non-kmalloc objects, but this restriction was
lifted ever since SLOB was dropped from the kernel, and since commit
6c6c47b063 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()").
Thus, replace call_rcu + mt_free_rcu with kfree_rcu.
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Setup the maple_node_cache with percpu sheaves of size 32 to hopefully
improve its performance. Note this will not immediately take advantage
of sheaf batching of kfree_rcu() operations due to the maple tree using
call_rcu with custom callbacks. The followup changes to maple tree will
change that and also make use of the prefilled sheaves functionality.
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Bulk insert mode was added to facilitate forking faster, but forking now
uses __mt_dup() to duplicate the tree.
The addition of sheaves has made the bulk allocations difficult to
maintain - since the expected entries would preallocate into the maple
state. A big part of the maple state node allocation was the ability to
push nodes back onto the state for later use, which was essential to the
bulk insert algorithm.
Remove mas_expected_entries() and mas_destroy_rebalance() functions as
well as the MA_STATE_BULK and MA_STATE_REBALANCE maple state flags since
there are no users anymore. Drop the associated testing as well.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Add comments explaining the fields for maple_metadata, since "end" is
ambiguous and "gap" can be confused as the largest gap, whereas it is
actually the offset of the largest gap.
Add comment for mas_ascend() to explain, whose min and max we are trying
to find. Explain that, for example, if we are already on offset zero,
then the parent min is mas->min, otherwise we need to walk up to find the
implied pivot min.
Link: https://lkml.kernel.org/r/20250703063338.51509-1-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In order to support rebalancing and spanning stores using less than the
worst case number of nodes, we need to track more than just the vacant
height. Using only vacant height to reduce the worst case maple node
allocation count can lead to a shortcoming of nodes in the following
scenarios.
For rebalancing writes, when a leaf node becomes insufficient, it may be
combined with a sibling into a single node. This means that the parent
node which has entries for this children will lose one entry. If this
parent node was just meeting the minimum entries, losing one entry will
now cause this parent node to be insufficient. This leads to a cascading
operation of rebalancing at different levels and can lead to more node
allocations than simply using vacant height can return.
For spanning writes, a similar situation occurs. At the location at which
a spanning write is detected, the number of ancestor nodes may similarly
need to rebalanced into a smaller number of nodes and the same cascading
situation could occur.
To use less than the full height of the tree for the number of
allocations, we also need to track the height at which a non-leaf node
cannot become insufficient. This means even if a rebalance occurs to a
child of this node, it currently has enough entries that it can lose one
without any further action. This field is stored in the maple write state
as sufficient height. In mas_prealloc_calc() when figuring out how many
nodes to allocate, we check if the vacant node is lower in the tree than a
sufficient node (has a larger value). If it is, we cannot use the vacant
height and must use the difference in the height and sufficient height as
the basis for the number of nodes needed.
An off by one bug was also discovered in mast_overflow() where it is using
>= rather than >. This caused extra iterations of the
mas_spanning_rebalance() loop and lead to unneeded allocations. A test is
also added to check the number of allocations is correct.
Link: https://lkml.kernel.org/r/20250410191446.2474640-6-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In order to determine the store type for a maple tree operation, a walk of
the tree is done through mas_wr_walk(). This function descends the tree
until a spanning write is detected or we reach a leaf node. While
descending, keep track of the height at which we encounter a node with
available space. This is done by checking if mas->end is less than the
number of slots a given node type can fit.
Now that the height of the vacant node is tracked, we can use the
difference between the height of the tree and the height of the vacant
node to know how many levels we will have to propagate creating new nodes.
Update mas_prealloc_calc() to consider the vacant height and reduce the
number of worst-case allocations.
Rebalancing and spanning stores are not supported and fall back to using
the full height of the tree for allocations.
Update preallocation testing assertions to take into account vacant
height.
Link: https://lkml.kernel.org/r/20250410191446.2474640-4-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For the maple tree, the root node is defined to have a depth of 0 with a
height of 1. Each level down from the node, these values are incremented
by 1. Various code paths define a root with depth 1 which is inconsisent
with the definition. Modify the code to be consistent with this
definition.
In mas_spanning_rebalance(), l_mas.depth was being used to track the
height based on the number of iterations done in the main loop. This
information was then used in mas_put_in_tree() to set the height. Rather
than overload the l_mas.depth field to track height, simply keep track of
height in the local variable new_height and directly pass this to
mas_wmb_replace() which will be passed into mas_put_in_tree(). This
allows up to remove writes to l_mas.depth.
Link: https://lkml.kernel.org/r/20250410191446.2474640-3-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
