mirror of
https://github.com/torvalds/linux.git
synced 2026-04-18 06:44:00 -04:00
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
1838 lines
45 KiB
C
1838 lines
45 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* (C) Copyright 2002-2004 Greg Kroah-Hartman <greg@kroah.com>
|
|
* (C) Copyright 2002-2004 IBM Corp.
|
|
* (C) Copyright 2003 Matthew Wilcox
|
|
* (C) Copyright 2003 Hewlett-Packard
|
|
* (C) Copyright 2004 Jon Smirl <jonsmirl@yahoo.com>
|
|
* (C) Copyright 2004 Silicon Graphics, Inc. Jesse Barnes <jbarnes@sgi.com>
|
|
*
|
|
* File attributes for PCI devices
|
|
*
|
|
* Modeled after usb's driverfs.c
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/cleanup.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/stat.h>
|
|
#include <linux/export.h>
|
|
#include <linux/topology.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/capability.h>
|
|
#include <linux/security.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/vgaarb.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/msi.h>
|
|
#include <linux/of.h>
|
|
#include <linux/aperture.h>
|
|
#include <linux/unaligned.h>
|
|
#include "pci.h"
|
|
|
|
#ifndef ARCH_PCI_DEV_GROUPS
|
|
#define ARCH_PCI_DEV_GROUPS
|
|
#endif
|
|
|
|
static int sysfs_initialized; /* = 0 */
|
|
|
|
/* show configuration fields */
|
|
#define pci_config_attr(field, format_string) \
|
|
static ssize_t \
|
|
field##_show(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct pci_dev *pdev; \
|
|
\
|
|
pdev = to_pci_dev(dev); \
|
|
return sysfs_emit(buf, format_string, pdev->field); \
|
|
} \
|
|
static DEVICE_ATTR_RO(field)
|
|
|
|
pci_config_attr(vendor, "0x%04x\n");
|
|
pci_config_attr(device, "0x%04x\n");
|
|
pci_config_attr(subsystem_vendor, "0x%04x\n");
|
|
pci_config_attr(subsystem_device, "0x%04x\n");
|
|
pci_config_attr(revision, "0x%02x\n");
|
|
pci_config_attr(class, "0x%06x\n");
|
|
|
|
static ssize_t irq_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
/*
|
|
* For MSI, show the first MSI IRQ; for all other cases including
|
|
* MSI-X, show the legacy INTx IRQ.
|
|
*/
|
|
if (pdev->msi_enabled)
|
|
return sysfs_emit(buf, "%u\n", pci_irq_vector(pdev, 0));
|
|
#endif
|
|
|
|
return sysfs_emit(buf, "%u\n", pdev->irq);
|
|
}
|
|
static DEVICE_ATTR_RO(irq);
|
|
|
|
static ssize_t broken_parity_status_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
return sysfs_emit(buf, "%u\n", pdev->broken_parity_status);
|
|
}
|
|
|
|
static ssize_t broken_parity_status_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
unsigned long val;
|
|
|
|
if (kstrtoul(buf, 0, &val) < 0)
|
|
return -EINVAL;
|
|
|
|
pdev->broken_parity_status = !!val;
|
|
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR_RW(broken_parity_status);
|
|
|
|
static ssize_t pci_dev_show_local_cpu(struct device *dev, bool list,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
const struct cpumask *mask;
|
|
|
|
#ifdef CONFIG_NUMA
|
|
if (dev_to_node(dev) == NUMA_NO_NODE)
|
|
mask = cpu_online_mask;
|
|
else
|
|
mask = cpumask_of_node(dev_to_node(dev));
|
|
#else
|
|
mask = cpumask_of_pcibus(to_pci_dev(dev)->bus);
|
|
#endif
|
|
return cpumap_print_to_pagebuf(list, buf, mask);
|
|
}
|
|
|
|
static ssize_t local_cpus_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return pci_dev_show_local_cpu(dev, false, attr, buf);
|
|
}
|
|
static DEVICE_ATTR_RO(local_cpus);
|
|
|
|
static ssize_t local_cpulist_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return pci_dev_show_local_cpu(dev, true, attr, buf);
|
|
}
|
|
static DEVICE_ATTR_RO(local_cpulist);
|
|
|
|
/*
|
|
* PCI Bus Class Devices
|
|
*/
|
|
static ssize_t cpuaffinity_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
const struct cpumask *cpumask = cpumask_of_pcibus(to_pci_bus(dev));
|
|
|
|
return cpumap_print_to_pagebuf(false, buf, cpumask);
|
|
}
|
|
static DEVICE_ATTR_RO(cpuaffinity);
|
|
|
|
static ssize_t cpulistaffinity_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
const struct cpumask *cpumask = cpumask_of_pcibus(to_pci_bus(dev));
|
|
|
|
return cpumap_print_to_pagebuf(true, buf, cpumask);
|
|
}
|
|
static DEVICE_ATTR_RO(cpulistaffinity);
|
|
|
|
static ssize_t power_state_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
|
return sysfs_emit(buf, "%s\n", pci_power_name(pdev->current_state));
|
|
}
|
|
static DEVICE_ATTR_RO(power_state);
|
|
|
|
/* show resources */
|
|
static ssize_t resource_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
int i;
|
|
int max;
|
|
resource_size_t start, end;
|
|
size_t len = 0;
|
|
|
|
if (pci_dev->subordinate)
|
|
max = DEVICE_COUNT_RESOURCE;
|
|
else
|
|
max = PCI_BRIDGE_RESOURCES;
|
|
|
|
for (i = 0; i < max; i++) {
|
|
struct resource *res = &pci_dev->resource[i];
|
|
struct resource zerores = {};
|
|
|
|
/* For backwards compatibility */
|
|
if (pci_resource_is_bridge_win(i) &&
|
|
res->flags & (IORESOURCE_UNSET | IORESOURCE_DISABLED))
|
|
res = &zerores;
|
|
|
|
pci_resource_to_user(pci_dev, i, res, &start, &end);
|
|
len += sysfs_emit_at(buf, len, "0x%016llx 0x%016llx 0x%016llx\n",
|
|
(unsigned long long)start,
|
|
(unsigned long long)end,
|
|
(unsigned long long)res->flags);
|
|
}
|
|
return len;
|
|
}
|
|
static DEVICE_ATTR_RO(resource);
|
|
|
|
static ssize_t max_link_speed_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
|
return sysfs_emit(buf, "%s\n",
|
|
pci_speed_string(pcie_get_speed_cap(pdev)));
|
|
}
|
|
static DEVICE_ATTR_RO(max_link_speed);
|
|
|
|
static ssize_t max_link_width_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
ssize_t ret;
|
|
|
|
/* We read PCI_EXP_LNKCAP, so we need the device to be accessible. */
|
|
pci_config_pm_runtime_get(pdev);
|
|
ret = sysfs_emit(buf, "%u\n", pcie_get_width_cap(pdev));
|
|
pci_config_pm_runtime_put(pdev);
|
|
|
|
return ret;
|
|
}
|
|
static DEVICE_ATTR_RO(max_link_width);
|
|
|
|
static ssize_t current_link_speed_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
u16 linkstat;
|
|
int err;
|
|
enum pci_bus_speed speed;
|
|
|
|
pci_config_pm_runtime_get(pci_dev);
|
|
err = pcie_capability_read_word(pci_dev, PCI_EXP_LNKSTA, &linkstat);
|
|
pci_config_pm_runtime_put(pci_dev);
|
|
|
|
if (err)
|
|
return -EINVAL;
|
|
|
|
speed = pcie_link_speed[linkstat & PCI_EXP_LNKSTA_CLS];
|
|
|
|
return sysfs_emit(buf, "%s\n", pci_speed_string(speed));
|
|
}
|
|
static DEVICE_ATTR_RO(current_link_speed);
|
|
|
|
static ssize_t current_link_width_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
u16 linkstat;
|
|
int err;
|
|
|
|
pci_config_pm_runtime_get(pci_dev);
|
|
err = pcie_capability_read_word(pci_dev, PCI_EXP_LNKSTA, &linkstat);
|
|
pci_config_pm_runtime_put(pci_dev);
|
|
|
|
if (err)
|
|
return -EINVAL;
|
|
|
|
return sysfs_emit(buf, "%u\n", FIELD_GET(PCI_EXP_LNKSTA_NLW, linkstat));
|
|
}
|
|
static DEVICE_ATTR_RO(current_link_width);
|
|
|
|
static ssize_t secondary_bus_number_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
u8 sec_bus;
|
|
int err;
|
|
|
|
pci_config_pm_runtime_get(pci_dev);
|
|
err = pci_read_config_byte(pci_dev, PCI_SECONDARY_BUS, &sec_bus);
|
|
pci_config_pm_runtime_put(pci_dev);
|
|
|
|
if (err)
|
|
return -EINVAL;
|
|
|
|
return sysfs_emit(buf, "%u\n", sec_bus);
|
|
}
|
|
static DEVICE_ATTR_RO(secondary_bus_number);
|
|
|
|
static ssize_t subordinate_bus_number_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
u8 sub_bus;
|
|
int err;
|
|
|
|
pci_config_pm_runtime_get(pci_dev);
|
|
err = pci_read_config_byte(pci_dev, PCI_SUBORDINATE_BUS, &sub_bus);
|
|
pci_config_pm_runtime_put(pci_dev);
|
|
|
|
if (err)
|
|
return -EINVAL;
|
|
|
|
return sysfs_emit(buf, "%u\n", sub_bus);
|
|
}
|
|
static DEVICE_ATTR_RO(subordinate_bus_number);
|
|
|
|
static ssize_t ari_enabled_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
|
|
return sysfs_emit(buf, "%u\n", pci_ari_enabled(pci_dev->bus));
|
|
}
|
|
static DEVICE_ATTR_RO(ari_enabled);
|
|
|
|
static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
|
|
return sysfs_emit(buf, "pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02X\n",
|
|
pci_dev->vendor, pci_dev->device,
|
|
pci_dev->subsystem_vendor, pci_dev->subsystem_device,
|
|
(u8)(pci_dev->class >> 16), (u8)(pci_dev->class >> 8),
|
|
(u8)(pci_dev->class));
|
|
}
|
|
static DEVICE_ATTR_RO(modalias);
|
|
|
|
static ssize_t enable_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
unsigned long val;
|
|
ssize_t result = 0;
|
|
|
|
/* this can crash the machine when done on the "wrong" device */
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
return -EPERM;
|
|
|
|
if (kstrtoul(buf, 0, &val) < 0)
|
|
return -EINVAL;
|
|
|
|
device_lock(dev);
|
|
if (dev->driver)
|
|
result = -EBUSY;
|
|
else if (val)
|
|
result = pci_enable_device(pdev);
|
|
else if (pci_is_enabled(pdev))
|
|
pci_disable_device(pdev);
|
|
else
|
|
result = -EIO;
|
|
device_unlock(dev);
|
|
|
|
return result < 0 ? result : count;
|
|
}
|
|
|
|
static ssize_t enable_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct pci_dev *pdev;
|
|
|
|
pdev = to_pci_dev(dev);
|
|
return sysfs_emit(buf, "%u\n", atomic_read(&pdev->enable_cnt));
|
|
}
|
|
static DEVICE_ATTR_RW(enable);
|
|
|
|
#ifdef CONFIG_NUMA
|
|
static ssize_t numa_node_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
int node;
|
|
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
return -EPERM;
|
|
|
|
if (kstrtoint(buf, 0, &node) < 0)
|
|
return -EINVAL;
|
|
|
|
if ((node < 0 && node != NUMA_NO_NODE) || node >= MAX_NUMNODES)
|
|
return -EINVAL;
|
|
|
|
if (node != NUMA_NO_NODE && !node_online(node))
|
|
return -EINVAL;
|
|
|
|
if (node == dev->numa_node)
|
|
return count;
|
|
|
|
add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
|
|
pci_alert(pdev, FW_BUG "Overriding NUMA node to %d. Contact your vendor for updates.",
|
|
node);
|
|
|
|
dev->numa_node = node;
|
|
return count;
|
|
}
|
|
|
|
static ssize_t numa_node_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
return sysfs_emit(buf, "%d\n", dev->numa_node);
|
|
}
|
|
static DEVICE_ATTR_RW(numa_node);
|
|
#endif
|
|
|
|
static ssize_t dma_mask_bits_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
|
return sysfs_emit(buf, "%d\n", fls64(pdev->dma_mask));
|
|
}
|
|
static DEVICE_ATTR_RO(dma_mask_bits);
|
|
|
|
static ssize_t consistent_dma_mask_bits_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
return sysfs_emit(buf, "%d\n", fls64(dev->coherent_dma_mask));
|
|
}
|
|
static DEVICE_ATTR_RO(consistent_dma_mask_bits);
|
|
|
|
static ssize_t msi_bus_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct pci_bus *subordinate = pdev->subordinate;
|
|
|
|
return sysfs_emit(buf, "%u\n", subordinate ?
|
|
!(subordinate->bus_flags & PCI_BUS_FLAGS_NO_MSI)
|
|
: !pdev->no_msi);
|
|
}
|
|
|
|
static ssize_t msi_bus_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct pci_bus *subordinate = pdev->subordinate;
|
|
unsigned long val;
|
|
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
return -EPERM;
|
|
|
|
if (kstrtoul(buf, 0, &val) < 0)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* "no_msi" and "bus_flags" only affect what happens when a driver
|
|
* requests MSI or MSI-X. They don't affect any drivers that have
|
|
* already requested MSI or MSI-X.
|
|
*/
|
|
if (!subordinate) {
|
|
pdev->no_msi = !val;
|
|
pci_info(pdev, "MSI/MSI-X %s for future drivers\n",
|
|
val ? "allowed" : "disallowed");
|
|
return count;
|
|
}
|
|
|
|
if (val)
|
|
subordinate->bus_flags &= ~PCI_BUS_FLAGS_NO_MSI;
|
|
else
|
|
subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
|
|
|
|
dev_info(&subordinate->dev, "MSI/MSI-X %s for future drivers of devices on this bus\n",
|
|
val ? "allowed" : "disallowed");
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR_RW(msi_bus);
|
|
|
|
static ssize_t rescan_store(const struct bus_type *bus, const char *buf, size_t count)
|
|
{
|
|
unsigned long val;
|
|
struct pci_bus *b = NULL;
|
|
|
|
if (kstrtoul(buf, 0, &val) < 0)
|
|
return -EINVAL;
|
|
|
|
if (val) {
|
|
pci_lock_rescan_remove();
|
|
while ((b = pci_find_next_bus(b)) != NULL)
|
|
pci_rescan_bus(b);
|
|
pci_unlock_rescan_remove();
|
|
}
|
|
return count;
|
|
}
|
|
static BUS_ATTR_WO(rescan);
|
|
|
|
static struct attribute *pci_bus_attrs[] = {
|
|
&bus_attr_rescan.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group pci_bus_group = {
|
|
.attrs = pci_bus_attrs,
|
|
};
|
|
|
|
const struct attribute_group *pci_bus_groups[] = {
|
|
&pci_bus_group,
|
|
NULL,
|
|
};
|
|
|
|
static ssize_t dev_rescan_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
unsigned long val;
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
|
if (kstrtoul(buf, 0, &val) < 0)
|
|
return -EINVAL;
|
|
|
|
if (val) {
|
|
pci_lock_rescan_remove();
|
|
pci_rescan_bus(pdev->bus);
|
|
pci_unlock_rescan_remove();
|
|
}
|
|
return count;
|
|
}
|
|
static struct device_attribute dev_attr_dev_rescan = __ATTR(rescan, 0200, NULL,
|
|
dev_rescan_store);
|
|
|
|
static ssize_t remove_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
unsigned long val;
|
|
|
|
if (kstrtoul(buf, 0, &val) < 0)
|
|
return -EINVAL;
|
|
|
|
if (val && device_remove_file_self(dev, attr))
|
|
pci_stop_and_remove_bus_device_locked(to_pci_dev(dev));
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR_IGNORE_LOCKDEP(remove, 0220, NULL,
|
|
remove_store);
|
|
|
|
static ssize_t bus_rescan_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
unsigned long val;
|
|
struct pci_bus *bus = to_pci_bus(dev);
|
|
|
|
if (kstrtoul(buf, 0, &val) < 0)
|
|
return -EINVAL;
|
|
|
|
if (val) {
|
|
pci_lock_rescan_remove();
|
|
if (!pci_is_root_bus(bus) && list_empty(&bus->devices))
|
|
pci_rescan_bus_bridge_resize(bus->self);
|
|
else
|
|
pci_rescan_bus(bus);
|
|
pci_unlock_rescan_remove();
|
|
}
|
|
return count;
|
|
}
|
|
static struct device_attribute dev_attr_bus_rescan = __ATTR(rescan, 0200, NULL,
|
|
bus_rescan_store);
|
|
|
|
static ssize_t reset_subordinate_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
unsigned long val;
|
|
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
return -EPERM;
|
|
|
|
if (kstrtoul(buf, 0, &val) < 0)
|
|
return -EINVAL;
|
|
|
|
if (val) {
|
|
int ret = pci_try_reset_bridge(pdev);
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR_WO(reset_subordinate);
|
|
|
|
#if defined(CONFIG_PM) && defined(CONFIG_ACPI)
|
|
static ssize_t d3cold_allowed_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
unsigned long val;
|
|
|
|
if (kstrtoul(buf, 0, &val) < 0)
|
|
return -EINVAL;
|
|
|
|
pdev->d3cold_allowed = !!val;
|
|
pci_bridge_d3_update(pdev);
|
|
|
|
pm_runtime_resume(dev);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t d3cold_allowed_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
return sysfs_emit(buf, "%u\n", pdev->d3cold_allowed);
|
|
}
|
|
static DEVICE_ATTR_RW(d3cold_allowed);
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF
|
|
static ssize_t devspec_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct device_node *np = pci_device_to_OF_node(pdev);
|
|
|
|
if (np == NULL)
|
|
return 0;
|
|
return sysfs_emit(buf, "%pOF\n", np);
|
|
}
|
|
static DEVICE_ATTR_RO(devspec);
|
|
#endif
|
|
|
|
static struct attribute *pci_dev_attrs[] = {
|
|
&dev_attr_power_state.attr,
|
|
&dev_attr_resource.attr,
|
|
&dev_attr_vendor.attr,
|
|
&dev_attr_device.attr,
|
|
&dev_attr_subsystem_vendor.attr,
|
|
&dev_attr_subsystem_device.attr,
|
|
&dev_attr_revision.attr,
|
|
&dev_attr_class.attr,
|
|
&dev_attr_irq.attr,
|
|
&dev_attr_local_cpus.attr,
|
|
&dev_attr_local_cpulist.attr,
|
|
&dev_attr_modalias.attr,
|
|
#ifdef CONFIG_NUMA
|
|
&dev_attr_numa_node.attr,
|
|
#endif
|
|
&dev_attr_dma_mask_bits.attr,
|
|
&dev_attr_consistent_dma_mask_bits.attr,
|
|
&dev_attr_enable.attr,
|
|
&dev_attr_broken_parity_status.attr,
|
|
&dev_attr_msi_bus.attr,
|
|
#if defined(CONFIG_PM) && defined(CONFIG_ACPI)
|
|
&dev_attr_d3cold_allowed.attr,
|
|
#endif
|
|
#ifdef CONFIG_OF
|
|
&dev_attr_devspec.attr,
|
|
#endif
|
|
&dev_attr_ari_enabled.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute *pci_bridge_attrs[] = {
|
|
&dev_attr_subordinate_bus_number.attr,
|
|
&dev_attr_secondary_bus_number.attr,
|
|
&dev_attr_reset_subordinate.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute *pcie_dev_attrs[] = {
|
|
&dev_attr_current_link_speed.attr,
|
|
&dev_attr_current_link_width.attr,
|
|
&dev_attr_max_link_width.attr,
|
|
&dev_attr_max_link_speed.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute *pcibus_attrs[] = {
|
|
&dev_attr_bus_rescan.attr,
|
|
&dev_attr_cpuaffinity.attr,
|
|
&dev_attr_cpulistaffinity.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group pcibus_group = {
|
|
.attrs = pcibus_attrs,
|
|
};
|
|
|
|
const struct attribute_group *pcibus_groups[] = {
|
|
&pcibus_group,
|
|
NULL,
|
|
};
|
|
|
|
static ssize_t boot_vga_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct pci_dev *vga_dev = vga_default_device();
|
|
|
|
if (vga_dev)
|
|
return sysfs_emit(buf, "%u\n", (pdev == vga_dev));
|
|
|
|
return sysfs_emit(buf, "%u\n",
|
|
!!(pdev->resource[PCI_ROM_RESOURCE].flags &
|
|
IORESOURCE_ROM_SHADOW));
|
|
}
|
|
static DEVICE_ATTR_RO(boot_vga);
|
|
|
|
static ssize_t serial_number_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
u64 dsn;
|
|
u8 bytes[8];
|
|
|
|
dsn = pci_get_dsn(pci_dev);
|
|
if (!dsn)
|
|
return -EIO;
|
|
|
|
put_unaligned_be64(dsn, bytes);
|
|
return sysfs_emit(buf, "%8phD\n", bytes);
|
|
}
|
|
static DEVICE_ATTR_ADMIN_RO(serial_number);
|
|
|
|
static ssize_t pci_read_config(struct file *filp, struct kobject *kobj,
|
|
const struct bin_attribute *bin_attr, char *buf,
|
|
loff_t off, size_t count)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(kobj_to_dev(kobj));
|
|
unsigned int size = 64;
|
|
loff_t init_off = off;
|
|
u8 *data = (u8 *) buf;
|
|
|
|
/* Several chips lock up trying to read undefined config space */
|
|
if (file_ns_capable(filp, &init_user_ns, CAP_SYS_ADMIN))
|
|
size = dev->cfg_size;
|
|
else if (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
|
|
size = 128;
|
|
|
|
if (off > size)
|
|
return 0;
|
|
if (off + count > size) {
|
|
size -= off;
|
|
count = size;
|
|
} else {
|
|
size = count;
|
|
}
|
|
|
|
pci_config_pm_runtime_get(dev);
|
|
|
|
if ((off & 1) && size) {
|
|
u8 val;
|
|
pci_user_read_config_byte(dev, off, &val);
|
|
data[off - init_off] = val;
|
|
off++;
|
|
size--;
|
|
}
|
|
|
|
if ((off & 3) && size > 2) {
|
|
u16 val;
|
|
pci_user_read_config_word(dev, off, &val);
|
|
data[off - init_off] = val & 0xff;
|
|
data[off - init_off + 1] = (val >> 8) & 0xff;
|
|
off += 2;
|
|
size -= 2;
|
|
}
|
|
|
|
while (size > 3) {
|
|
u32 val;
|
|
pci_user_read_config_dword(dev, off, &val);
|
|
data[off - init_off] = val & 0xff;
|
|
data[off - init_off + 1] = (val >> 8) & 0xff;
|
|
data[off - init_off + 2] = (val >> 16) & 0xff;
|
|
data[off - init_off + 3] = (val >> 24) & 0xff;
|
|
off += 4;
|
|
size -= 4;
|
|
cond_resched();
|
|
}
|
|
|
|
if (size >= 2) {
|
|
u16 val;
|
|
pci_user_read_config_word(dev, off, &val);
|
|
data[off - init_off] = val & 0xff;
|
|
data[off - init_off + 1] = (val >> 8) & 0xff;
|
|
off += 2;
|
|
size -= 2;
|
|
}
|
|
|
|
if (size > 0) {
|
|
u8 val;
|
|
pci_user_read_config_byte(dev, off, &val);
|
|
data[off - init_off] = val;
|
|
}
|
|
|
|
pci_config_pm_runtime_put(dev);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t pci_write_config(struct file *filp, struct kobject *kobj,
|
|
const struct bin_attribute *bin_attr, char *buf,
|
|
loff_t off, size_t count)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(kobj_to_dev(kobj));
|
|
unsigned int size = count;
|
|
loff_t init_off = off;
|
|
u8 *data = (u8 *) buf;
|
|
int ret;
|
|
|
|
ret = security_locked_down(LOCKDOWN_PCI_ACCESS);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (resource_is_exclusive(&dev->driver_exclusive_resource, off,
|
|
count)) {
|
|
pci_warn_once(dev, "%s: Unexpected write to kernel-exclusive config offset %llx",
|
|
current->comm, off);
|
|
add_taint(TAINT_USER, LOCKDEP_STILL_OK);
|
|
}
|
|
|
|
if (off > dev->cfg_size)
|
|
return 0;
|
|
if (off + count > dev->cfg_size) {
|
|
size = dev->cfg_size - off;
|
|
count = size;
|
|
}
|
|
|
|
pci_config_pm_runtime_get(dev);
|
|
|
|
if ((off & 1) && size) {
|
|
pci_user_write_config_byte(dev, off, data[off - init_off]);
|
|
off++;
|
|
size--;
|
|
}
|
|
|
|
if ((off & 3) && size > 2) {
|
|
u16 val = data[off - init_off];
|
|
val |= (u16) data[off - init_off + 1] << 8;
|
|
pci_user_write_config_word(dev, off, val);
|
|
off += 2;
|
|
size -= 2;
|
|
}
|
|
|
|
while (size > 3) {
|
|
u32 val = data[off - init_off];
|
|
val |= (u32) data[off - init_off + 1] << 8;
|
|
val |= (u32) data[off - init_off + 2] << 16;
|
|
val |= (u32) data[off - init_off + 3] << 24;
|
|
pci_user_write_config_dword(dev, off, val);
|
|
off += 4;
|
|
size -= 4;
|
|
}
|
|
|
|
if (size >= 2) {
|
|
u16 val = data[off - init_off];
|
|
val |= (u16) data[off - init_off + 1] << 8;
|
|
pci_user_write_config_word(dev, off, val);
|
|
off += 2;
|
|
size -= 2;
|
|
}
|
|
|
|
if (size)
|
|
pci_user_write_config_byte(dev, off, data[off - init_off]);
|
|
|
|
pci_config_pm_runtime_put(dev);
|
|
|
|
return count;
|
|
}
|
|
static const BIN_ATTR(config, 0644, pci_read_config, pci_write_config, 0);
|
|
|
|
static const struct bin_attribute *const pci_dev_config_attrs[] = {
|
|
&bin_attr_config,
|
|
NULL,
|
|
};
|
|
|
|
static size_t pci_dev_config_attr_bin_size(struct kobject *kobj,
|
|
const struct bin_attribute *a,
|
|
int n)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
|
|
|
|
if (pdev->cfg_size > PCI_CFG_SPACE_SIZE)
|
|
return PCI_CFG_SPACE_EXP_SIZE;
|
|
return PCI_CFG_SPACE_SIZE;
|
|
}
|
|
|
|
static const struct attribute_group pci_dev_config_attr_group = {
|
|
.bin_attrs = pci_dev_config_attrs,
|
|
.bin_size = pci_dev_config_attr_bin_size,
|
|
};
|
|
|
|
/*
|
|
* llseek operation for mmappable PCI resources.
|
|
* May be left unused if the arch doesn't provide them.
|
|
*/
|
|
static __maybe_unused loff_t
|
|
pci_llseek_resource(struct file *filep,
|
|
struct kobject *kobj __always_unused,
|
|
const struct bin_attribute *attr,
|
|
loff_t offset, int whence)
|
|
{
|
|
return fixed_size_llseek(filep, offset, whence, attr->size);
|
|
}
|
|
|
|
#ifdef HAVE_PCI_LEGACY
|
|
/**
|
|
* pci_read_legacy_io - read byte(s) from legacy I/O port space
|
|
* @filp: open sysfs file
|
|
* @kobj: kobject corresponding to file to read from
|
|
* @bin_attr: struct bin_attribute for this file
|
|
* @buf: buffer to store results
|
|
* @off: offset into legacy I/O port space
|
|
* @count: number of bytes to read
|
|
*
|
|
* Reads 1, 2, or 4 bytes from legacy I/O port space using an arch specific
|
|
* callback routine (pci_legacy_read).
|
|
*/
|
|
static ssize_t pci_read_legacy_io(struct file *filp, struct kobject *kobj,
|
|
const struct bin_attribute *bin_attr,
|
|
char *buf, loff_t off, size_t count)
|
|
{
|
|
struct pci_bus *bus = to_pci_bus(kobj_to_dev(kobj));
|
|
|
|
/* Only support 1, 2 or 4 byte accesses */
|
|
if (count != 1 && count != 2 && count != 4)
|
|
return -EINVAL;
|
|
|
|
return pci_legacy_read(bus, off, (u32 *)buf, count);
|
|
}
|
|
|
|
/**
|
|
* pci_write_legacy_io - write byte(s) to legacy I/O port space
|
|
* @filp: open sysfs file
|
|
* @kobj: kobject corresponding to file to read from
|
|
* @bin_attr: struct bin_attribute for this file
|
|
* @buf: buffer containing value to be written
|
|
* @off: offset into legacy I/O port space
|
|
* @count: number of bytes to write
|
|
*
|
|
* Writes 1, 2, or 4 bytes from legacy I/O port space using an arch specific
|
|
* callback routine (pci_legacy_write).
|
|
*/
|
|
static ssize_t pci_write_legacy_io(struct file *filp, struct kobject *kobj,
|
|
const struct bin_attribute *bin_attr,
|
|
char *buf, loff_t off, size_t count)
|
|
{
|
|
struct pci_bus *bus = to_pci_bus(kobj_to_dev(kobj));
|
|
|
|
/* Only support 1, 2 or 4 byte accesses */
|
|
if (count != 1 && count != 2 && count != 4)
|
|
return -EINVAL;
|
|
|
|
return pci_legacy_write(bus, off, *(u32 *)buf, count);
|
|
}
|
|
|
|
/**
|
|
* pci_mmap_legacy_mem - map legacy PCI memory into user memory space
|
|
* @filp: open sysfs file
|
|
* @kobj: kobject corresponding to device to be mapped
|
|
* @attr: struct bin_attribute for this file
|
|
* @vma: struct vm_area_struct passed to mmap
|
|
*
|
|
* Uses an arch specific callback, pci_mmap_legacy_mem_page_range, to mmap
|
|
* legacy memory space (first meg of bus space) into application virtual
|
|
* memory space.
|
|
*/
|
|
static int pci_mmap_legacy_mem(struct file *filp, struct kobject *kobj,
|
|
const struct bin_attribute *attr,
|
|
struct vm_area_struct *vma)
|
|
{
|
|
struct pci_bus *bus = to_pci_bus(kobj_to_dev(kobj));
|
|
|
|
return pci_mmap_legacy_page_range(bus, vma, pci_mmap_mem);
|
|
}
|
|
|
|
/**
|
|
* pci_mmap_legacy_io - map legacy PCI IO into user memory space
|
|
* @filp: open sysfs file
|
|
* @kobj: kobject corresponding to device to be mapped
|
|
* @attr: struct bin_attribute for this file
|
|
* @vma: struct vm_area_struct passed to mmap
|
|
*
|
|
* Uses an arch specific callback, pci_mmap_legacy_io_page_range, to mmap
|
|
* legacy IO space (first meg of bus space) into application virtual
|
|
* memory space. Returns -ENOSYS if the operation isn't supported
|
|
*/
|
|
static int pci_mmap_legacy_io(struct file *filp, struct kobject *kobj,
|
|
const struct bin_attribute *attr,
|
|
struct vm_area_struct *vma)
|
|
{
|
|
struct pci_bus *bus = to_pci_bus(kobj_to_dev(kobj));
|
|
|
|
return pci_mmap_legacy_page_range(bus, vma, pci_mmap_io);
|
|
}
|
|
|
|
/**
|
|
* pci_adjust_legacy_attr - adjustment of legacy file attributes
|
|
* @b: bus to create files under
|
|
* @mmap_type: I/O port or memory
|
|
*
|
|
* Stub implementation. Can be overridden by arch if necessary.
|
|
*/
|
|
void __weak pci_adjust_legacy_attr(struct pci_bus *b,
|
|
enum pci_mmap_state mmap_type)
|
|
{
|
|
}
|
|
|
|
/**
|
|
* pci_create_legacy_files - create legacy I/O port and memory files
|
|
* @b: bus to create files under
|
|
*
|
|
* Some platforms allow access to legacy I/O port and ISA memory space on
|
|
* a per-bus basis. This routine creates the files and ties them into
|
|
* their associated read, write and mmap files from pci-sysfs.c
|
|
*
|
|
* On error unwind, but don't propagate the error to the caller
|
|
* as it is ok to set up the PCI bus without these files.
|
|
*/
|
|
void pci_create_legacy_files(struct pci_bus *b)
|
|
{
|
|
int error;
|
|
|
|
if (!sysfs_initialized)
|
|
return;
|
|
|
|
b->legacy_io = kzalloc_objs(struct bin_attribute, 2, GFP_ATOMIC);
|
|
if (!b->legacy_io)
|
|
goto kzalloc_err;
|
|
|
|
sysfs_bin_attr_init(b->legacy_io);
|
|
b->legacy_io->attr.name = "legacy_io";
|
|
b->legacy_io->size = 0xffff;
|
|
b->legacy_io->attr.mode = 0600;
|
|
b->legacy_io->read = pci_read_legacy_io;
|
|
b->legacy_io->write = pci_write_legacy_io;
|
|
/* See pci_create_attr() for motivation */
|
|
b->legacy_io->llseek = pci_llseek_resource;
|
|
b->legacy_io->mmap = pci_mmap_legacy_io;
|
|
b->legacy_io->f_mapping = iomem_get_mapping;
|
|
pci_adjust_legacy_attr(b, pci_mmap_io);
|
|
error = device_create_bin_file(&b->dev, b->legacy_io);
|
|
if (error)
|
|
goto legacy_io_err;
|
|
|
|
/* Allocated above after the legacy_io struct */
|
|
b->legacy_mem = b->legacy_io + 1;
|
|
sysfs_bin_attr_init(b->legacy_mem);
|
|
b->legacy_mem->attr.name = "legacy_mem";
|
|
b->legacy_mem->size = 1024*1024;
|
|
b->legacy_mem->attr.mode = 0600;
|
|
b->legacy_mem->mmap = pci_mmap_legacy_mem;
|
|
/* See pci_create_attr() for motivation */
|
|
b->legacy_mem->llseek = pci_llseek_resource;
|
|
b->legacy_mem->f_mapping = iomem_get_mapping;
|
|
pci_adjust_legacy_attr(b, pci_mmap_mem);
|
|
error = device_create_bin_file(&b->dev, b->legacy_mem);
|
|
if (error)
|
|
goto legacy_mem_err;
|
|
|
|
return;
|
|
|
|
legacy_mem_err:
|
|
device_remove_bin_file(&b->dev, b->legacy_io);
|
|
legacy_io_err:
|
|
kfree(b->legacy_io);
|
|
b->legacy_io = NULL;
|
|
kzalloc_err:
|
|
dev_warn(&b->dev, "could not create legacy I/O port and ISA memory resources in sysfs\n");
|
|
}
|
|
|
|
void pci_remove_legacy_files(struct pci_bus *b)
|
|
{
|
|
if (b->legacy_io) {
|
|
device_remove_bin_file(&b->dev, b->legacy_io);
|
|
device_remove_bin_file(&b->dev, b->legacy_mem);
|
|
kfree(b->legacy_io); /* both are allocated here */
|
|
}
|
|
}
|
|
#endif /* HAVE_PCI_LEGACY */
|
|
|
|
#if defined(HAVE_PCI_MMAP) || defined(ARCH_GENERIC_PCI_MMAP_RESOURCE)
|
|
/**
|
|
* pci_mmap_resource - map a PCI resource into user memory space
|
|
* @kobj: kobject for mapping
|
|
* @attr: struct bin_attribute for the file being mapped
|
|
* @vma: struct vm_area_struct passed into the mmap
|
|
* @write_combine: 1 for write_combine mapping
|
|
*
|
|
* Use the regular PCI mapping routines to map a PCI resource into userspace.
|
|
*/
|
|
static int pci_mmap_resource(struct kobject *kobj, const struct bin_attribute *attr,
|
|
struct vm_area_struct *vma, int write_combine)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
|
|
int bar = (unsigned long)attr->private;
|
|
enum pci_mmap_state mmap_type;
|
|
struct resource *res = &pdev->resource[bar];
|
|
int ret;
|
|
|
|
ret = security_locked_down(LOCKDOWN_PCI_ACCESS);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (res->flags & IORESOURCE_MEM && iomem_is_exclusive(res->start))
|
|
return -EINVAL;
|
|
|
|
if (!pci_mmap_fits(pdev, bar, vma, PCI_MMAP_SYSFS))
|
|
return -EINVAL;
|
|
|
|
mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
|
|
|
|
return pci_mmap_resource_range(pdev, bar, vma, mmap_type, write_combine);
|
|
}
|
|
|
|
static int pci_mmap_resource_uc(struct file *filp, struct kobject *kobj,
|
|
const struct bin_attribute *attr,
|
|
struct vm_area_struct *vma)
|
|
{
|
|
return pci_mmap_resource(kobj, attr, vma, 0);
|
|
}
|
|
|
|
static int pci_mmap_resource_wc(struct file *filp, struct kobject *kobj,
|
|
const struct bin_attribute *attr,
|
|
struct vm_area_struct *vma)
|
|
{
|
|
return pci_mmap_resource(kobj, attr, vma, 1);
|
|
}
|
|
|
|
static ssize_t pci_resource_io(struct file *filp, struct kobject *kobj,
|
|
const struct bin_attribute *attr, char *buf,
|
|
loff_t off, size_t count, bool write)
|
|
{
|
|
#ifdef CONFIG_HAS_IOPORT
|
|
struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
|
|
int bar = (unsigned long)attr->private;
|
|
unsigned long port = off;
|
|
|
|
port += pci_resource_start(pdev, bar);
|
|
|
|
if (port > pci_resource_end(pdev, bar))
|
|
return 0;
|
|
|
|
if (port + count - 1 > pci_resource_end(pdev, bar))
|
|
return -EINVAL;
|
|
|
|
switch (count) {
|
|
case 1:
|
|
if (write)
|
|
outb(*(u8 *)buf, port);
|
|
else
|
|
*(u8 *)buf = inb(port);
|
|
return 1;
|
|
case 2:
|
|
if (write)
|
|
outw(*(u16 *)buf, port);
|
|
else
|
|
*(u16 *)buf = inw(port);
|
|
return 2;
|
|
case 4:
|
|
if (write)
|
|
outl(*(u32 *)buf, port);
|
|
else
|
|
*(u32 *)buf = inl(port);
|
|
return 4;
|
|
}
|
|
return -EINVAL;
|
|
#else
|
|
return -ENXIO;
|
|
#endif
|
|
}
|
|
|
|
static ssize_t pci_read_resource_io(struct file *filp, struct kobject *kobj,
|
|
const struct bin_attribute *attr, char *buf,
|
|
loff_t off, size_t count)
|
|
{
|
|
return pci_resource_io(filp, kobj, attr, buf, off, count, false);
|
|
}
|
|
|
|
static ssize_t pci_write_resource_io(struct file *filp, struct kobject *kobj,
|
|
const struct bin_attribute *attr, char *buf,
|
|
loff_t off, size_t count)
|
|
{
|
|
int ret;
|
|
|
|
ret = security_locked_down(LOCKDOWN_PCI_ACCESS);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pci_resource_io(filp, kobj, attr, buf, off, count, true);
|
|
}
|
|
|
|
/**
|
|
* pci_remove_resource_files - cleanup resource files
|
|
* @pdev: dev to cleanup
|
|
*
|
|
* If we created resource files for @pdev, remove them from sysfs and
|
|
* free their resources.
|
|
*/
|
|
static void pci_remove_resource_files(struct pci_dev *pdev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < PCI_STD_NUM_BARS; i++) {
|
|
struct bin_attribute *res_attr;
|
|
|
|
res_attr = pdev->res_attr[i];
|
|
if (res_attr) {
|
|
sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
|
|
kfree(res_attr);
|
|
}
|
|
|
|
res_attr = pdev->res_attr_wc[i];
|
|
if (res_attr) {
|
|
sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
|
|
kfree(res_attr);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine)
|
|
{
|
|
/* allocate attribute structure, piggyback attribute name */
|
|
int name_len = write_combine ? 13 : 10;
|
|
struct bin_attribute *res_attr;
|
|
char *res_attr_name;
|
|
int retval;
|
|
|
|
res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC);
|
|
if (!res_attr)
|
|
return -ENOMEM;
|
|
|
|
res_attr_name = (char *)(res_attr + 1);
|
|
|
|
sysfs_bin_attr_init(res_attr);
|
|
if (write_combine) {
|
|
sprintf(res_attr_name, "resource%d_wc", num);
|
|
res_attr->mmap = pci_mmap_resource_wc;
|
|
} else {
|
|
sprintf(res_attr_name, "resource%d", num);
|
|
if (pci_resource_flags(pdev, num) & IORESOURCE_IO) {
|
|
res_attr->read = pci_read_resource_io;
|
|
res_attr->write = pci_write_resource_io;
|
|
if (arch_can_pci_mmap_io())
|
|
res_attr->mmap = pci_mmap_resource_uc;
|
|
} else {
|
|
res_attr->mmap = pci_mmap_resource_uc;
|
|
}
|
|
}
|
|
if (res_attr->mmap) {
|
|
res_attr->f_mapping = iomem_get_mapping;
|
|
/*
|
|
* generic_file_llseek() consults f_mapping->host to determine
|
|
* the file size. As iomem_inode knows nothing about the
|
|
* attribute, it's not going to work, so override it as well.
|
|
*/
|
|
res_attr->llseek = pci_llseek_resource;
|
|
}
|
|
res_attr->attr.name = res_attr_name;
|
|
res_attr->attr.mode = 0600;
|
|
res_attr->size = pci_resource_len(pdev, num);
|
|
res_attr->private = (void *)(unsigned long)num;
|
|
retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
|
|
if (retval) {
|
|
kfree(res_attr);
|
|
return retval;
|
|
}
|
|
|
|
if (write_combine)
|
|
pdev->res_attr_wc[num] = res_attr;
|
|
else
|
|
pdev->res_attr[num] = res_attr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pci_create_resource_files - create resource files in sysfs for @dev
|
|
* @pdev: dev in question
|
|
*
|
|
* Walk the resources in @pdev creating files for each resource available.
|
|
*/
|
|
static int pci_create_resource_files(struct pci_dev *pdev)
|
|
{
|
|
int i;
|
|
int retval;
|
|
|
|
/* Skip devices with non-mappable BARs */
|
|
if (pdev->non_mappable_bars)
|
|
return 0;
|
|
|
|
/* Expose the PCI resources from this device as files */
|
|
for (i = 0; i < PCI_STD_NUM_BARS; i++) {
|
|
|
|
/* skip empty resources */
|
|
if (!pci_resource_len(pdev, i))
|
|
continue;
|
|
|
|
retval = pci_create_attr(pdev, i, 0);
|
|
/* for prefetchable resources, create a WC mappable file */
|
|
if (!retval && arch_can_pci_mmap_wc() &&
|
|
pdev->resource[i].flags & IORESOURCE_PREFETCH)
|
|
retval = pci_create_attr(pdev, i, 1);
|
|
if (retval) {
|
|
pci_remove_resource_files(pdev);
|
|
return retval;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
#else /* !(defined(HAVE_PCI_MMAP) || defined(ARCH_GENERIC_PCI_MMAP_RESOURCE)) */
|
|
int __weak pci_create_resource_files(struct pci_dev *dev) { return 0; }
|
|
void __weak pci_remove_resource_files(struct pci_dev *dev) { return; }
|
|
#endif
|
|
|
|
/**
|
|
* pci_write_rom - used to enable access to the PCI ROM display
|
|
* @filp: sysfs file
|
|
* @kobj: kernel object handle
|
|
* @bin_attr: struct bin_attribute for this file
|
|
* @buf: user input
|
|
* @off: file offset
|
|
* @count: number of byte in input
|
|
*
|
|
* writing anything except 0 enables it
|
|
*/
|
|
static ssize_t pci_write_rom(struct file *filp, struct kobject *kobj,
|
|
const struct bin_attribute *bin_attr, char *buf,
|
|
loff_t off, size_t count)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
|
|
|
|
if ((off == 0) && (*buf == '0') && (count == 2))
|
|
pdev->rom_attr_enabled = 0;
|
|
else
|
|
pdev->rom_attr_enabled = 1;
|
|
|
|
return count;
|
|
}
|
|
|
|
/**
|
|
* pci_read_rom - read a PCI ROM
|
|
* @filp: sysfs file
|
|
* @kobj: kernel object handle
|
|
* @bin_attr: struct bin_attribute for this file
|
|
* @buf: where to put the data we read from the ROM
|
|
* @off: file offset
|
|
* @count: number of bytes to read
|
|
*
|
|
* Put @count bytes starting at @off into @buf from the ROM in the PCI
|
|
* device corresponding to @kobj.
|
|
*/
|
|
static ssize_t pci_read_rom(struct file *filp, struct kobject *kobj,
|
|
const struct bin_attribute *bin_attr, char *buf,
|
|
loff_t off, size_t count)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
|
|
void __iomem *rom;
|
|
size_t size;
|
|
|
|
if (!pdev->rom_attr_enabled)
|
|
return -EINVAL;
|
|
|
|
rom = pci_map_rom(pdev, &size); /* size starts out as PCI window size */
|
|
if (!rom || !size)
|
|
return -EIO;
|
|
|
|
if (off >= size)
|
|
count = 0;
|
|
else {
|
|
if (off + count > size)
|
|
count = size - off;
|
|
|
|
memcpy_fromio(buf, rom + off, count);
|
|
}
|
|
pci_unmap_rom(pdev, rom);
|
|
|
|
return count;
|
|
}
|
|
static const BIN_ATTR(rom, 0600, pci_read_rom, pci_write_rom, 0);
|
|
|
|
static const struct bin_attribute *const pci_dev_rom_attrs[] = {
|
|
&bin_attr_rom,
|
|
NULL,
|
|
};
|
|
|
|
static umode_t pci_dev_rom_attr_is_visible(struct kobject *kobj,
|
|
const struct bin_attribute *a, int n)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
|
|
|
|
/* If the device has a ROM, try to expose it in sysfs. */
|
|
if (!pci_resource_end(pdev, PCI_ROM_RESOURCE))
|
|
return 0;
|
|
|
|
return a->attr.mode;
|
|
}
|
|
|
|
static size_t pci_dev_rom_attr_bin_size(struct kobject *kobj,
|
|
const struct bin_attribute *a, int n)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
|
|
|
|
return pci_resource_len(pdev, PCI_ROM_RESOURCE);
|
|
}
|
|
|
|
static const struct attribute_group pci_dev_rom_attr_group = {
|
|
.bin_attrs = pci_dev_rom_attrs,
|
|
.is_bin_visible = pci_dev_rom_attr_is_visible,
|
|
.bin_size = pci_dev_rom_attr_bin_size,
|
|
};
|
|
|
|
static ssize_t reset_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
unsigned long val;
|
|
ssize_t result;
|
|
|
|
if (kstrtoul(buf, 0, &val) < 0)
|
|
return -EINVAL;
|
|
|
|
if (val != 1)
|
|
return -EINVAL;
|
|
|
|
pm_runtime_get_sync(dev);
|
|
result = pci_reset_function(pdev);
|
|
pm_runtime_put(dev);
|
|
if (result < 0)
|
|
return result;
|
|
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR_WO(reset);
|
|
|
|
static struct attribute *pci_dev_reset_attrs[] = {
|
|
&dev_attr_reset.attr,
|
|
NULL,
|
|
};
|
|
|
|
static umode_t pci_dev_reset_attr_is_visible(struct kobject *kobj,
|
|
struct attribute *a, int n)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
|
|
|
|
if (!pci_reset_supported(pdev))
|
|
return 0;
|
|
|
|
return a->mode;
|
|
}
|
|
|
|
static const struct attribute_group pci_dev_reset_attr_group = {
|
|
.attrs = pci_dev_reset_attrs,
|
|
.is_visible = pci_dev_reset_attr_is_visible,
|
|
};
|
|
|
|
static ssize_t reset_method_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
ssize_t len = 0;
|
|
int i, m;
|
|
|
|
for (i = 0; i < PCI_NUM_RESET_METHODS; i++) {
|
|
m = pdev->reset_methods[i];
|
|
if (!m)
|
|
break;
|
|
|
|
len += sysfs_emit_at(buf, len, "%s%s", len ? " " : "",
|
|
pci_reset_fn_methods[m].name);
|
|
}
|
|
|
|
if (len)
|
|
len += sysfs_emit_at(buf, len, "\n");
|
|
|
|
return len;
|
|
}
|
|
|
|
static int reset_method_lookup(const char *name)
|
|
{
|
|
int m;
|
|
|
|
for (m = 1; m < PCI_NUM_RESET_METHODS; m++) {
|
|
if (sysfs_streq(name, pci_reset_fn_methods[m].name))
|
|
return m;
|
|
}
|
|
|
|
return 0; /* not found */
|
|
}
|
|
|
|
static ssize_t reset_method_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
char *tmp_options, *name;
|
|
int m, n;
|
|
u8 reset_methods[PCI_NUM_RESET_METHODS] = {};
|
|
|
|
if (sysfs_streq(buf, "")) {
|
|
pdev->reset_methods[0] = 0;
|
|
pci_warn(pdev, "All device reset methods disabled by user");
|
|
return count;
|
|
}
|
|
|
|
PM_RUNTIME_ACQUIRE(dev, pm);
|
|
if (PM_RUNTIME_ACQUIRE_ERR(&pm))
|
|
return -ENXIO;
|
|
|
|
if (sysfs_streq(buf, "default")) {
|
|
pci_init_reset_methods(pdev);
|
|
return count;
|
|
}
|
|
|
|
char *options __free(kfree) = kstrndup(buf, count, GFP_KERNEL);
|
|
if (!options)
|
|
return -ENOMEM;
|
|
|
|
n = 0;
|
|
tmp_options = options;
|
|
while ((name = strsep(&tmp_options, " ")) != NULL) {
|
|
if (sysfs_streq(name, ""))
|
|
continue;
|
|
|
|
name = strim(name);
|
|
|
|
/* Leave previous methods unchanged if input is invalid */
|
|
m = reset_method_lookup(name);
|
|
if (!m) {
|
|
pci_err(pdev, "Invalid reset method '%s'", name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pci_reset_fn_methods[m].reset_fn(pdev, PCI_RESET_PROBE)) {
|
|
pci_err(pdev, "Unsupported reset method '%s'", name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (n == PCI_NUM_RESET_METHODS - 1) {
|
|
pci_err(pdev, "Too many reset methods\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
reset_methods[n++] = m;
|
|
}
|
|
|
|
reset_methods[n] = 0;
|
|
|
|
/* Warn if dev-specific supported but not highest priority */
|
|
if (pci_reset_fn_methods[1].reset_fn(pdev, PCI_RESET_PROBE) == 0 &&
|
|
reset_methods[0] != 1)
|
|
pci_warn(pdev, "Device-specific reset disabled/de-prioritized by user");
|
|
memcpy(pdev->reset_methods, reset_methods, sizeof(pdev->reset_methods));
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR_RW(reset_method);
|
|
|
|
static struct attribute *pci_dev_reset_method_attrs[] = {
|
|
&dev_attr_reset_method.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group pci_dev_reset_method_attr_group = {
|
|
.attrs = pci_dev_reset_method_attrs,
|
|
.is_visible = pci_dev_reset_attr_is_visible,
|
|
};
|
|
|
|
static ssize_t __resource_resize_show(struct device *dev, int n, char *buf)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
ssize_t ret;
|
|
|
|
pci_config_pm_runtime_get(pdev);
|
|
|
|
ret = sysfs_emit(buf, "%016llx\n",
|
|
pci_rebar_get_possible_sizes(pdev, n));
|
|
|
|
pci_config_pm_runtime_put(pdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t __resource_resize_store(struct device *dev, int n,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct pci_bus *bus = pdev->bus;
|
|
unsigned long size;
|
|
int ret;
|
|
u16 cmd;
|
|
|
|
if (kstrtoul(buf, 0, &size) < 0)
|
|
return -EINVAL;
|
|
|
|
device_lock(dev);
|
|
if (dev->driver || pci_num_vf(pdev)) {
|
|
ret = -EBUSY;
|
|
goto unlock;
|
|
}
|
|
|
|
pci_config_pm_runtime_get(pdev);
|
|
|
|
if ((pdev->class >> 8) == PCI_CLASS_DISPLAY_VGA) {
|
|
ret = aperture_remove_conflicting_pci_devices(pdev,
|
|
"resourceN_resize");
|
|
if (ret)
|
|
goto pm_put;
|
|
}
|
|
|
|
pci_read_config_word(pdev, PCI_COMMAND, &cmd);
|
|
pci_write_config_word(pdev, PCI_COMMAND,
|
|
cmd & ~PCI_COMMAND_MEMORY);
|
|
|
|
pci_remove_resource_files(pdev);
|
|
|
|
ret = pci_resize_resource(pdev, n, size, 0);
|
|
|
|
pci_assign_unassigned_bus_resources(bus);
|
|
|
|
if (pci_create_resource_files(pdev))
|
|
pci_warn(pdev, "Failed to recreate resource files after BAR resizing\n");
|
|
|
|
pci_write_config_word(pdev, PCI_COMMAND, cmd);
|
|
pm_put:
|
|
pci_config_pm_runtime_put(pdev);
|
|
unlock:
|
|
device_unlock(dev);
|
|
|
|
return ret ? ret : count;
|
|
}
|
|
|
|
#define pci_dev_resource_resize_attr(n) \
|
|
static ssize_t resource##n##_resize_show(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
char *buf) \
|
|
{ \
|
|
return __resource_resize_show(dev, n, buf); \
|
|
} \
|
|
static ssize_t resource##n##_resize_store(struct device *dev, \
|
|
struct device_attribute *attr,\
|
|
const char *buf, size_t count)\
|
|
{ \
|
|
return __resource_resize_store(dev, n, buf, count); \
|
|
} \
|
|
static DEVICE_ATTR_RW(resource##n##_resize)
|
|
|
|
pci_dev_resource_resize_attr(0);
|
|
pci_dev_resource_resize_attr(1);
|
|
pci_dev_resource_resize_attr(2);
|
|
pci_dev_resource_resize_attr(3);
|
|
pci_dev_resource_resize_attr(4);
|
|
pci_dev_resource_resize_attr(5);
|
|
|
|
static struct attribute *resource_resize_attrs[] = {
|
|
&dev_attr_resource0_resize.attr,
|
|
&dev_attr_resource1_resize.attr,
|
|
&dev_attr_resource2_resize.attr,
|
|
&dev_attr_resource3_resize.attr,
|
|
&dev_attr_resource4_resize.attr,
|
|
&dev_attr_resource5_resize.attr,
|
|
NULL,
|
|
};
|
|
|
|
static umode_t resource_resize_is_visible(struct kobject *kobj,
|
|
struct attribute *a, int n)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
|
|
|
|
return pci_rebar_get_current_size(pdev, n) < 0 ? 0 : a->mode;
|
|
}
|
|
|
|
static const struct attribute_group pci_dev_resource_resize_group = {
|
|
.attrs = resource_resize_attrs,
|
|
.is_visible = resource_resize_is_visible,
|
|
};
|
|
|
|
int __must_check pci_create_sysfs_dev_files(struct pci_dev *pdev)
|
|
{
|
|
if (!sysfs_initialized)
|
|
return -EACCES;
|
|
|
|
return pci_create_resource_files(pdev);
|
|
}
|
|
|
|
/**
|
|
* pci_remove_sysfs_dev_files - cleanup PCI specific sysfs files
|
|
* @pdev: device whose entries we should free
|
|
*
|
|
* Cleanup when @pdev is removed from sysfs.
|
|
*/
|
|
void pci_remove_sysfs_dev_files(struct pci_dev *pdev)
|
|
{
|
|
if (!sysfs_initialized)
|
|
return;
|
|
|
|
pci_remove_resource_files(pdev);
|
|
}
|
|
|
|
static int __init pci_sysfs_init(void)
|
|
{
|
|
struct pci_dev *pdev = NULL;
|
|
struct pci_bus *pbus = NULL;
|
|
int retval;
|
|
|
|
sysfs_initialized = 1;
|
|
for_each_pci_dev(pdev) {
|
|
retval = pci_create_sysfs_dev_files(pdev);
|
|
if (retval) {
|
|
pci_dev_put(pdev);
|
|
return retval;
|
|
}
|
|
}
|
|
|
|
while ((pbus = pci_find_next_bus(pbus)))
|
|
pci_create_legacy_files(pbus);
|
|
|
|
return 0;
|
|
}
|
|
late_initcall(pci_sysfs_init);
|
|
|
|
static struct attribute *pci_dev_dev_attrs[] = {
|
|
&dev_attr_boot_vga.attr,
|
|
&dev_attr_serial_number.attr,
|
|
NULL,
|
|
};
|
|
|
|
static umode_t pci_dev_attrs_are_visible(struct kobject *kobj,
|
|
struct attribute *a, int n)
|
|
{
|
|
struct device *dev = kobj_to_dev(kobj);
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
|
if (a == &dev_attr_boot_vga.attr && pci_is_vga(pdev))
|
|
return a->mode;
|
|
|
|
if (a == &dev_attr_serial_number.attr && pci_get_dsn(pdev))
|
|
return a->mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct attribute *pci_dev_hp_attrs[] = {
|
|
&dev_attr_remove.attr,
|
|
&dev_attr_dev_rescan.attr,
|
|
NULL,
|
|
};
|
|
|
|
static umode_t pci_dev_hp_attrs_are_visible(struct kobject *kobj,
|
|
struct attribute *a, int n)
|
|
{
|
|
struct device *dev = kobj_to_dev(kobj);
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
|
if (pdev->is_virtfn)
|
|
return 0;
|
|
|
|
return a->mode;
|
|
}
|
|
|
|
static umode_t pci_bridge_attrs_are_visible(struct kobject *kobj,
|
|
struct attribute *a, int n)
|
|
{
|
|
struct device *dev = kobj_to_dev(kobj);
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
|
if (pci_is_bridge(pdev))
|
|
return a->mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static umode_t pcie_dev_attrs_are_visible(struct kobject *kobj,
|
|
struct attribute *a, int n)
|
|
{
|
|
struct device *dev = kobj_to_dev(kobj);
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
|
|
if (pci_is_pcie(pdev))
|
|
return a->mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct attribute_group pci_dev_group = {
|
|
.attrs = pci_dev_attrs,
|
|
};
|
|
|
|
const struct attribute_group *pci_dev_groups[] = {
|
|
&pci_dev_group,
|
|
&pci_dev_config_attr_group,
|
|
&pci_dev_rom_attr_group,
|
|
&pci_dev_reset_attr_group,
|
|
&pci_dev_reset_method_attr_group,
|
|
&pci_dev_vpd_attr_group,
|
|
#ifdef CONFIG_DMI
|
|
&pci_dev_smbios_attr_group,
|
|
#endif
|
|
#ifdef CONFIG_ACPI
|
|
&pci_dev_acpi_attr_group,
|
|
#endif
|
|
&pci_dev_resource_resize_group,
|
|
ARCH_PCI_DEV_GROUPS
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group pci_dev_hp_attr_group = {
|
|
.attrs = pci_dev_hp_attrs,
|
|
.is_visible = pci_dev_hp_attrs_are_visible,
|
|
};
|
|
|
|
static const struct attribute_group pci_dev_attr_group = {
|
|
.attrs = pci_dev_dev_attrs,
|
|
.is_visible = pci_dev_attrs_are_visible,
|
|
};
|
|
|
|
static const struct attribute_group pci_bridge_attr_group = {
|
|
.attrs = pci_bridge_attrs,
|
|
.is_visible = pci_bridge_attrs_are_visible,
|
|
};
|
|
|
|
static const struct attribute_group pcie_dev_attr_group = {
|
|
.attrs = pcie_dev_attrs,
|
|
.is_visible = pcie_dev_attrs_are_visible,
|
|
};
|
|
|
|
const struct attribute_group *pci_dev_attr_groups[] = {
|
|
&pci_dev_attr_group,
|
|
&pci_dev_hp_attr_group,
|
|
#ifdef CONFIG_PCI_IOV
|
|
&sriov_pf_dev_attr_group,
|
|
&sriov_vf_dev_attr_group,
|
|
#endif
|
|
&pci_bridge_attr_group,
|
|
&pcie_dev_attr_group,
|
|
#ifdef CONFIG_PCIEAER
|
|
&aer_stats_attr_group,
|
|
&aer_attr_group,
|
|
#endif
|
|
#ifdef CONFIG_PCIEASPM
|
|
&aspm_ctrl_attr_group,
|
|
#endif
|
|
#ifdef CONFIG_PCI_DOE
|
|
&pci_doe_sysfs_group,
|
|
#endif
|
|
#ifdef CONFIG_PCI_TSM
|
|
&pci_tsm_auth_attr_group,
|
|
&pci_tsm_attr_group,
|
|
#endif
|
|
NULL,
|
|
};
|