Files
linux/Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml
Igor Reznichenko 96cee719d2 dt-bindings: hwmon: ST TSC1641 power monitor
Add binding for the TSC1641 I2C power monitor.

Signed-off-by: Igor Reznichenko <igor@reznichenko.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251105201406.1210856-2-igor@reznichenko.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-11-12 12:08:36 -08:00

64 lines
1.6 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/hwmon/st,tsc1641.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ST Microelectronics TSC1641 I2C power monitor
maintainers:
- Igor Reznichenko <igor@reznichenko.net>
description: |
TSC1641 is a 60 V, 16-bit high-precision power monitor with I2C and
MIPI I3C interface
Datasheets:
https://www.st.com/resource/en/datasheet/tsc1641.pdf
properties:
compatible:
const: st,tsc1641
reg:
maxItems: 1
interrupts:
description: Optional alert interrupt.
maxItems: 1
shunt-resistor-micro-ohms:
description: Shunt resistor value in micro-ohms. Since device has internal
16-bit RSHUNT register with 10 uOhm LSB, the maximum value is capped at
655.35 mOhm.
minimum: 100
default: 1000
maximum: 655350
st,alert-polarity-active-high:
$ref: /schemas/types.yaml#/definitions/flag
description: Default value is 0 which configures the normal polarity of the
ALERT pin, being active low open-drain. Setting this to 1 configures the
polarity of the ALERT pin to be inverted and active high open-drain.
Specify this property to set the alert polarity to active-high.
required:
- compatible
- reg
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
power-sensor@40 {
compatible = "st,tsc1641";
reg = <0x40>;
shunt-resistor-micro-ohms = <1000>;
st,alert-polarity-active-high;
};
};