mirror of
https://github.com/torvalds/linux.git
synced 2026-04-22 08:44:02 -04:00
c0d6fe2f01
Pull ARM DT updates from Olof Johansson: "As usual, this is the massive branch we have for each release. Lots of various updates and additions of hardware descriptions on existing hardware, as well as the usual additions of new boards and SoCs. This is also the first release where we've started mixing 64- and 32-bit DT updates in one branch. (Specific details on what's actually here and new is pretty easy to tell from the diffstat, so there's little point in duplicating listing it here)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits) ARM: dts: uniphier: add system-bus-controller nodes ARM64: juno: disable NOR flash node by default ARM: dts: uniphier: add outer cache controller nodes arm64: defconfig: Enable PCI generic host bridge by default arm64: Juno: Add support for the PCIe host bridge on Juno R1 Documentation: of: Document the bindings used by Juno R1 PCIe host bridge ARM: dts: uniphier: add I2C aliases for ProXstream2 boards dts/Makefile: Add build support for LS2080a QDS & RDB board DTS dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards dts/ls2080a: Update Simulator DTS to add support of various peripherals dts/ls2080a: Remove text about writing to Free Software Foundation dts/ls2080a: Update DTSI to add support of various peripherals doc: DTS: Update DWC3 binding to provide reference to generic bindings doc/bindings: Update GPIO devicetree binding documentation for LS2080A Documentation/dts: Move FSL board-specific bindings out of /powerpc Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards arm64: Rename FSL LS2085A SoC support code to LS2080A arm64: Use generic Layerscape SoC family naming ARM: dts: uniphier: add ProXstream2 Vodka board support ARM: dts: uniphier: add ProXstream2 Gentil board support ...
54 lines
1.5 KiB
Plaintext
54 lines
1.5 KiB
Plaintext
* ARM Performance Monitor Units
|
|
|
|
ARM cores often have a PMU for counting cpu and cache events like cache misses
|
|
and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU
|
|
representation in the device tree should be done as under:-
|
|
|
|
Required properties:
|
|
|
|
- compatible : should be one of
|
|
"apm,potenza-pmu"
|
|
"arm,armv8-pmuv3"
|
|
"arm.cortex-a57-pmu"
|
|
"arm.cortex-a53-pmu"
|
|
"arm,cortex-a17-pmu"
|
|
"arm,cortex-a15-pmu"
|
|
"arm,cortex-a12-pmu"
|
|
"arm,cortex-a9-pmu"
|
|
"arm,cortex-a8-pmu"
|
|
"arm,cortex-a7-pmu"
|
|
"arm,cortex-a5-pmu"
|
|
"arm,arm11mpcore-pmu"
|
|
"arm,arm1176-pmu"
|
|
"arm,arm1136-pmu"
|
|
"qcom,scorpion-pmu"
|
|
"qcom,scorpion-mp-pmu"
|
|
"qcom,krait-pmu"
|
|
- interrupts : 1 combined interrupt or 1 per core. If the interrupt is a per-cpu
|
|
interrupt (PPI) then 1 interrupt should be specified.
|
|
|
|
Optional properties:
|
|
|
|
- interrupt-affinity : When using SPIs, specifies a list of phandles to CPU
|
|
nodes corresponding directly to the affinity of
|
|
the SPIs listed in the interrupts property.
|
|
|
|
When using a PPI, specifies a list of phandles to CPU
|
|
nodes corresponding to the set of CPUs which have
|
|
a PMU of this type signalling the PPI listed in the
|
|
interrupts property.
|
|
|
|
This property should be present when there is more than
|
|
a single SPI.
|
|
|
|
|
|
- qcom,no-pc-write : Indicates that this PMU doesn't support the 0xc and 0xd
|
|
events.
|
|
|
|
Example:
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts = <100 101>;
|
|
};
|