mirror of
https://github.com/torvalds/linux.git
synced 2026-04-18 06:44:00 -04:00
72b3943028
Move APQ8084 PCIe devices from qcom,pcie.yaml binding to a dedicated file to make reviewing and maintenance easier. New schema is equivalent to the old one with few changes: - Adding a required compatible, which is actually redundant. - Drop the really obvious comments next to clock/reg/reset-names items. After moving the qcom,pcie.yaml becames empty thus can be entirely removed. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20251217-dt-bindings-pci-qcom-v2-12-873721599754@oss.qualcomm.com
110 lines
2.6 KiB
YAML
110 lines
2.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pci/qcom,pcie-apq8084.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm APQ8084 PCI Express Root Complex
|
|
|
|
maintainers:
|
|
- Bjorn Andersson <andersson@kernel.org>
|
|
- Manivannan Sadhasivam <mani@kernel.org>
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- qcom,pcie-apq8084
|
|
|
|
reg:
|
|
minItems: 4
|
|
maxItems: 5
|
|
|
|
reg-names:
|
|
minItems: 4
|
|
items:
|
|
- const: parf
|
|
- const: dbi
|
|
- const: elbi
|
|
- const: config
|
|
- const: mhi
|
|
|
|
clocks:
|
|
maxItems: 4
|
|
|
|
clock-names:
|
|
items:
|
|
- const: iface # Configuration AHB clock
|
|
- const: master_bus # Master AXI clock
|
|
- const: slave_bus # Slave AXI clock
|
|
- const: aux
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-names:
|
|
items:
|
|
- const: msi
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
reset-names:
|
|
items:
|
|
- const: core
|
|
|
|
vdda-supply:
|
|
description: A phandle to the core analog power supply
|
|
|
|
required:
|
|
- power-domains
|
|
- resets
|
|
- reset-names
|
|
|
|
allOf:
|
|
- $ref: qcom,pcie-common.yaml#
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
pcie@fc520000 {
|
|
compatible = "qcom,pcie-apq8084";
|
|
reg = <0xfc520000 0x2000>,
|
|
<0xff000000 0x1000>,
|
|
<0xff001000 0x1000>,
|
|
<0xff002000 0x2000>;
|
|
reg-names = "parf", "dbi", "elbi", "config";
|
|
device_type = "pci";
|
|
linux,pci-domain = <0>;
|
|
bus-range = <0x00 0xff>;
|
|
num-lanes = <1>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges = <0x81000000 0 0 0xff200000 0 0x00100000>,
|
|
<0x82000000 0 0x00300000 0xff300000 0 0x00d00000>;
|
|
interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "msi";
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0x7>;
|
|
interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc 324>,
|
|
<&gcc 325>,
|
|
<&gcc 327>,
|
|
<&gcc 323>;
|
|
clock-names = "iface", "master_bus", "slave_bus", "aux";
|
|
resets = <&gcc 81>;
|
|
reset-names = "core";
|
|
power-domains = <&gcc 1>;
|
|
vdda-supply = <&pma8084_l3>;
|
|
phys = <&pciephy0>;
|
|
phy-names = "pciephy";
|
|
perst-gpios = <&tlmm 70 GPIO_ACTIVE_LOW>;
|
|
pinctrl-0 = <&pcie0_pins_default>;
|
|
pinctrl-names = "default";
|
|
};
|