Files
linux/drivers/bus/Makefile
Gatien Chevallier f1939c6a0b drivers: bus: add the stm32 debug bus driver
Add the stm32 debug bus driver that is responsible of checking the
debug subsystem accessibility before probing the related peripheral
drivers.

This driver is OP-TEE dependent and relies on the STM32 debug access
PTA.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-6-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:40:22 +01:00

47 lines
1.5 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the bus drivers.
#
# Interconnect bus drivers for ARM platforms
obj-$(CONFIG_ARM_CCI) += arm-cci.o
obj-$(CONFIG_ARM_INTEGRATOR_LM) += arm-integrator-lm.o
obj-$(CONFIG_HISILICON_LPC) += hisi_lpc.o
obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmstb_gisb.o
obj-$(CONFIG_MOXTET) += moxtet.o
# DPAA2 fsl-mc bus
obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/
obj-$(CONFIG_BT1_APB) += bt1-apb.o
obj-$(CONFIG_BT1_AXI) += bt1-axi.o
obj-$(CONFIG_IMX_AIPSTZ) += imx-aipstz.o
obj-$(CONFIG_IMX_WEIM) += imx-weim.o
obj-$(CONFIG_INTEL_IXP4XX_EB) += intel-ixp4xx-eb.o
obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o
obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
# Interconnect bus driver for OMAP SoCs.
obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
obj-$(CONFIG_QCOM_EBI2) += qcom-ebi2.o
obj-$(CONFIG_QCOM_SSC_BLOCK_BUS) += qcom-ssc-block-bus.o
obj-$(CONFIG_STM32_DBG_BUS) += stm32_dbg_bus.o
obj-$(CONFIG_STM32_FIREWALL) += stm32_firewall.o stm32_rifsc.o stm32_etzpc.o
obj-$(CONFIG_SUN50I_DE2_BUS) += sun50i-de2.o
obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o
obj-$(CONFIG_OF) += simple-pm-bus.o
obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o
obj-$(CONFIG_TEGRA_GMI) += tegra-gmi.o
obj-$(CONFIG_TI_PWMSS) += ti-pwmss.o
obj-$(CONFIG_TI_SYSC) += ti-sysc.o
obj-$(CONFIG_TS_NBUS) += ts-nbus.o
obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
obj-$(CONFIG_DA8XX_MSTPRI) += da8xx-mstpri.o
# MHI
obj-y += mhi/