mirror of
https://github.com/torvalds/linux.git
synced 2026-04-24 17:42:27 -04:00
ad88400145
mt8173: - use assinged-clocks and assigned-clock-parents - fix compatible for SoC to a72 - add pmu nodes mt8183: - add sysirq binding - add pinctrl dt header file mt7629: - update bindings description fo sysirq, uart and scpsys mt8516: - add binding description for watchdog, timer, uart and sysirq * tag 'v5.1-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt8173: add pmu nodes for mt8173 arm64: dts: mt8173: correct cpu type of cpu2 and cpu3 to cortex-a72 dt-bindings: irq: mtk,sysirq: add support for MT8516 dt-bindings: serial: mtk-uart: add support for MT8516 dt-bindings: timer: mtk-timer: add support for MT8516 dt-bindings: wdog: mtk-wdt: add support for MT851 dt-bindings: soc: fix a typo for MT7623A dt-bindings: mediatek: update bindings for MT7629 SoC arm64: dts: mt8183: add pinctrl file dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183 arm64: dts: Using standard CCF interface to set vcodec clk Signed-off-by: Olof Johansson <olof@lixom.net>
46 lines
1.8 KiB
Plaintext
46 lines
1.8 KiB
Plaintext
* MediaTek Universal Asynchronous Receiver/Transmitter (UART)
|
|
|
|
Required properties:
|
|
- compatible should contain:
|
|
* "mediatek,mt2701-uart" for MT2701 compatible UARTS
|
|
* "mediatek,mt2712-uart" for MT2712 compatible UARTS
|
|
* "mediatek,mt6580-uart" for MT6580 compatible UARTS
|
|
* "mediatek,mt6582-uart" for MT6582 compatible UARTS
|
|
* "mediatek,mt6589-uart" for MT6589 compatible UARTS
|
|
* "mediatek,mt6755-uart" for MT6755 compatible UARTS
|
|
* "mediatek,mt6765-uart" for MT6765 compatible UARTS
|
|
* "mediatek,mt6795-uart" for MT6795 compatible UARTS
|
|
* "mediatek,mt6797-uart" for MT6797 compatible UARTS
|
|
* "mediatek,mt7622-uart" for MT7622 compatible UARTS
|
|
* "mediatek,mt7623-uart" for MT7623 compatible UARTS
|
|
* "mediatek,mt7629-uart" for MT7629 compatible UARTS
|
|
* "mediatek,mt8127-uart" for MT8127 compatible UARTS
|
|
* "mediatek,mt8135-uart" for MT8135 compatible UARTS
|
|
* "mediatek,mt8173-uart" for MT8173 compatible UARTS
|
|
* "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
|
|
* "mediatek,mt8516-uart" for MT8516 compatible UARTS
|
|
* "mediatek,mt6577-uart" for MT6577 and all of the above
|
|
|
|
- reg: The base address of the UART register bank.
|
|
|
|
- interrupts: A single interrupt specifier.
|
|
|
|
- clocks : Must contain an entry for each entry in clock-names.
|
|
See ../clocks/clock-bindings.txt for details.
|
|
- clock-names:
|
|
- "baud": The clock the baudrate is derived from
|
|
- "bus": The bus clock for register accesses (optional)
|
|
|
|
For compatibility with older device trees an unnamed clock is used for the
|
|
baud clock if the baudclk does not exist. Do not use this for new designs.
|
|
|
|
Example:
|
|
|
|
uart0: serial@11006000 {
|
|
compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
|
|
reg = <0x11006000 0x400>;
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&uart_clk>, <&bus_clk>;
|
|
clock-names = "baud", "bus";
|
|
};
|