mirror of
https://github.com/torvalds/linux.git
synced 2026-04-24 17:42:27 -04:00
086e9074f5
Another round of 'allOf' removals that came in this cycle. json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Signed-off-by: Rob Herring <robh@kernel.org>
130 lines
4.0 KiB
YAML
130 lines
4.0 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
|
||
# Copyright (C) 2019 Texas Instruments Incorporated
|
||
%YAML 1.2
|
||
---
|
||
$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml#
|
||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
||
title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter
|
||
|
||
maintainers:
|
||
- Dan Murphy <dmurphy@ti.com>
|
||
|
||
description: |
|
||
The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital
|
||
PDM microphones recording), high-performance audio, analog-to-digital
|
||
converter (ADC) with analog inputs supporting up to 2V RMS. The TLV320ADCX140
|
||
family supports line and microphone Inputs, and offers a programmable
|
||
microphone bias or supply voltage generation.
|
||
|
||
Specifications can be found at:
|
||
http://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf
|
||
http://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf
|
||
http://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf
|
||
|
||
properties:
|
||
compatible:
|
||
oneOf:
|
||
- const: ti,tlv320adc3140
|
||
- const: ti,tlv320adc5140
|
||
- const: ti,tlv320adc6140
|
||
|
||
reg:
|
||
maxItems: 1
|
||
description: |
|
||
I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
|
||
|
||
reset-gpios:
|
||
description: |
|
||
GPIO used for hardware reset.
|
||
|
||
areg-supply:
|
||
description: |
|
||
Regulator with AVDD at 3.3V. If not defined then the internal regulator
|
||
is enabled.
|
||
|
||
ti,mic-bias-source:
|
||
description: |
|
||
Indicates the source for MIC Bias.
|
||
0 - Mic bias is set to VREF
|
||
1 - Mic bias is set to VREF × 1.096
|
||
6 - Mic bias is set to AVDD
|
||
$ref: /schemas/types.yaml#/definitions/uint32
|
||
enum: [0, 1, 6]
|
||
|
||
ti,vref-source:
|
||
description: |
|
||
Indicates the source for MIC Bias.
|
||
0 - Set VREF to 2.75V
|
||
1 - Set VREF to 2.5V
|
||
2 - Set VREF to 1.375V
|
||
$ref: /schemas/types.yaml#/definitions/uint32
|
||
enum: [0, 1, 2]
|
||
|
||
ti,pdm-edge-select:
|
||
description: |
|
||
Defines the PDMCLK sampling edge configuration for the PDM inputs. This
|
||
array is defined as <PDMIN1 PDMIN2 PDMIN3 PDMIN4>.
|
||
|
||
0 - (default) Odd channel is latched on the negative edge and even
|
||
channel is latched on the the positive edge.
|
||
1 - Odd channel is latched on the positive edge and even channel is
|
||
latched on the the negative edge.
|
||
|
||
PDMIN1 - PDMCLK latching edge used for channel 1 and 2 data
|
||
PDMIN2 - PDMCLK latching edge used for channel 3 and 4 data
|
||
PDMIN3 - PDMCLK latching edge used for channel 5 and 6 data
|
||
PDMIN4 - PDMCLK latching edge used for channel 7 and 8 data
|
||
|
||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
minItems: 1
|
||
maxItems: 4
|
||
items:
|
||
maximum: 1
|
||
default: [0, 0, 0, 0]
|
||
|
||
ti,gpi-config:
|
||
description: |
|
||
Defines the configuration for the general purpose input pins (GPI).
|
||
The array is defined as <GPI1 GPI2 GPI3 GPI4>.
|
||
|
||
0 - (default) disabled
|
||
1 - GPIX is configured as a general-purpose input (GPI)
|
||
2 - GPIX is configured as a master clock input (MCLK)
|
||
3 - GPIX is configured as an ASI input for daisy-chain (SDIN)
|
||
4 - GPIX is configured as a PDM data input for channel 1 and channel
|
||
(PDMDIN1)
|
||
5 - GPIX is configured as a PDM data input for channel 3 and channel
|
||
(PDMDIN2)
|
||
6 - GPIX is configured as a PDM data input for channel 5 and channel
|
||
(PDMDIN3)
|
||
7 - GPIX is configured as a PDM data input for channel 7 and channel
|
||
(PDMDIN4)
|
||
|
||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
minItems: 1
|
||
maxItems: 4
|
||
items:
|
||
maximum: 7
|
||
default: [0, 0, 0, 0]
|
||
|
||
required:
|
||
- compatible
|
||
- reg
|
||
|
||
examples:
|
||
- |
|
||
#include <dt-bindings/gpio/gpio.h>
|
||
i2c0 {
|
||
#address-cells = <1>;
|
||
#size-cells = <0>;
|
||
codec: codec@4c {
|
||
compatible = "ti,tlv320adc5140";
|
||
reg = <0x4c>;
|
||
ti,mic-bias-source = <6>;
|
||
ti,pdm-edge-select = <0 1 0 1>;
|
||
ti,gpi-config = <4 5 6 7>;
|
||
reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
|
||
};
|
||
};
|