Bruce Allan 4c86e0b945 e1000e: add Tx timeout factor for 100Mbps ...

On some devices (e.g. 82578) not having a Tx timeout factor when linked at
100Mbps can cause false reports of hardware hangs on busy hubs.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2009-11-20 13:53:26 -08:00

..

82571.c

e1000e: swap max hw supported frame size between 82574 and 82583

2009-10-04 21:08:49 -07:00

defines.h

e1000e: rework disable K1 at 1000Mbps for 82577/82578

2009-10-29 22:48:39 -07:00

e1000.h

e1000e: partial revert of 3ec2a2b8 plus FC workraround for 82577/8

2009-11-20 13:53:20 -08:00

es2lan.c

e1000e: add support for 82577/82578 GbE LOM parts

2009-06-03 02:46:34 -07:00

ethtool.c

e1000e: set flow control thresholds properly after enabling/disabling pause

2009-11-20 13:53:24 -08:00

hw.h

e1000e: rework disable K1 at 1000Mbps for 82577/82578

2009-10-29 22:48:39 -07:00

ich8lan.c

e1000e: partial revert of 3ec2a2b8 plus FC workraround for 82577/8

2009-11-20 13:53:20 -08:00

lib.c

e1000e: disable K1 at 1000Mbps for 82577/82578

2009-07-03 20:09:42 -07:00

Makefile

e1000e: reformat comment blocks, cosmetic changes only

2008-03-28 22:14:56 -04:00

netdev.c

e1000e: add Tx timeout factor for 100Mbps

2009-11-20 13:53:26 -08:00

param.c

e1000e: enable CRC stripping by default

2009-06-03 02:46:31 -07:00

phy.c

e1000e: read of PHY register may access wrong page on 82578

2009-11-20 13:53:22 -08:00